Match Data On Source And Destination Sheet And Change Value?
Jan 17, 2014
I have extracted data from multiple sheets and now want to mark this data as "Paid" and for the macro to go back and change the value in the original sheet on a row in column "AR" to "PAID.
All the columns have the same data type in.
The extracted data contains the original sheet name and each row has a unique ID No to it.
I know I probably need to use INDEX and MATCH and then Offset to post value.
Attached worksheet shows the data and columns.
View 14 Replies
ADVERTISEMENT
Oct 27, 2011
I have a source data sheet that has around 50 columns. I want to copy and past selected columns to a destination sheet.
View 1 Replies
View Related
May 12, 2014
My first shot at a function! hows it look?
Code:
Function wbIsopen(wbname As String) As Boolean
On Error Resume Next
WbIsOpen - (workbooks(wbname).Name = wbname)
End Function
[Code]...
This is also my first shot at using a DIM and Set. I am attempting to move the data from 1 workbook sheet to another after it has been sorted. But if i only have the source open i want it to open the destination workbook and sheet then paste and close the source sheet. If the source is open I want it to go to the next command.
View 3 Replies
View Related
Jul 17, 2014
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
=SUM(IF(AND([L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4>=182,[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet26!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet27!$I$4
View 9 Replies
View Related
Feb 26, 2014
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
View 2 Replies
View Related
Dec 10, 2009
I am sure this is simple but cant get me head around it (tried paste & paste link).. I am wanting to copy formulas in file (A) to file (B) with data source linked in the file (A).
i want is when i copy the formulas to file (B) sheet 2 and it should retain the original path say H:excelfile A[sheet1]$G$1+....xls and source from which the data is being used.
View 7 Replies
View Related
Jul 29, 2008
I'm positive that this is a dumb question that's been answered elsewhere, so pardon my n00bness -- this is a one-time project for a non-programmer.
My manager needs to edit values in a spreadsheet. This person is non-technical and put off by spreadsheets, so I want to create a custom view of the data to show only the editable data (with pretty colors and fonts, etc.)
I have a source worksheet and a display worksheet. I need the display worksheet to show the values in the source worksheet, and I need changes in the display sheet to change the referenced data in the source sheet. For example, if cell Source:A1 = "thingamabob", then cell Display:A1 = "thingamabob". If user changes cell Display:A1 to "hoodgie", then cell Source:A1 changes to "hoodgie".
Essentially, the user has to be able to edit the source cell via the display cell.
Is that possible?
Again, please excuse my ignorance -- for all I know, this may be an automated function in Excel... but I've been trying to figure it out for two hours and so I thought I'd ask you nice people.
View 9 Replies
View Related
Nov 8, 2012
I think I am closer but how do I get all of the data from A2 in the origination worksheet and then copy it to the last blank cell in column A in the destination sheet?
Code:
Sub test4()
Dim lastrow As Long
Set StartSheet = ActiveSheet
'MFG PART NUMBER
StartSheet.Range("R2").Copy
Workbooks.Open Filename:="D:\_DoxaMobiusServtrax Import Template"
[Code]...
View 6 Replies
View Related
Aug 9, 2007
I have an excel addin that contains chart templates. Without going into too much detail a user will select an option which will update these templates then move the charts along with the source data to a new workbook. My question is this; How do I change the chart references programatically so that the chart data now points to the source data in the new workbook.
View 5 Replies
View Related
Aug 30, 2007
When attempting to use the following
charts.add
activechart.setsourcedata thisworkbook.worksheets("PTPage1"). range("A1")
I receive the following error: Run-time Error '1004':
The source data of a pivotchart report cannot be changed. You can change the view of data in a pivotchart report by reorganizing its fields or items, or by changing its associated PivotTable report.
View 2 Replies
View Related
Feb 23, 2012
The order of entries in my chart legend make no sense to me. Why is it not matching the order of the source data?
View 1 Replies
View Related
Feb 9, 2012
I have a worksheet with many pivot tables and (eventually) 2 data sheets. I run a macro that creates the first pivot table and copies it 17 times. Then, using Call, I would like it to create the second data table, "Credits" (I'm working on that, but that's a seperate issue). Finally, I want one of the existing PT to change to the new data, "Credits".
I'm using an named range and that seems to be where I'm breaking.
Code:
Sub Remove_Credits()
'
Dim CSD As Worksheet
[Code].....
View 4 Replies
View Related
Mar 8, 2013
I have a Pivot table which is created by running a macro with formula calculated columns.
Q1. when i add another column in data sheet, and change the source manually, i get a error in calculated columns
Q2. I need to add the new column in data sheet to the row labels of the existing pivot sheet. with change formula calculated columns.
Q3. can we have any macro to this ?
View 3 Replies
View Related
Apr 17, 2013
I have an 'in-cell dropdown' which looks up two values, Q1 and Q2 I have a range of data by month showing a specific number as below e.g
Month
Count
2012-01
120
2012-02
190
2012-03
200
2012-04
150
2013-05
175
I have a Line graph using this entire table as the source data. What I would like to do is only use part of the data based on what the dropdown cell specifies. For example, if it is set to "Q1", I would like just the 2012-01 and 2012-02 data to show in the graph. If its "Q2", I would like only 2013-03 and 2012-04 data to show in the graph.
View 4 Replies
View Related
Jul 16, 2007
I am in the middle of building a macro for some data to be automated. I have two sheets, one of which has an existing chart but the data has been removed so now there is no values on the chart. I then have a second sheet with data on it. The range is b4:c16. I want to point this data onto my chart on the other sheet.
View 2 Replies
View Related
Aug 16, 2007
Is there a way to set the Paste options in Excel to default to "Match Destination Formatting"? Currently the program defaults to "Keep Source Formatting". It would be extremely helpful for the work I am doing to have the default be "Match Destination Formatting" instead. I thought there might be a way to set this under "Tools, Options, Edit," but there is nothing. I am using Excel 2003
View 3 Replies
View Related
Apr 1, 2009
Not sure if this can be done, still a rookie at this stuff. Everything works but can something be wrote into code too change list source?
View 5 Replies
View Related
Jun 6, 2014
I want see if it's possible to take the name of the source workbook and put it in a cell in my destination workbook and then use that as the reference in formulas. The source document title includes a date that changes yearly, or in some instances changes entirely, and I want to keep the formulas in the destination workbook intact. I don't want to have to go to every instance where I have used the source workbook and change the title. Instead I would like to copy the source workbook title, paste it into the destination in the same cell and have that propogate the needed changes into the destination workbook formulas.
View 2 Replies
View Related
Apr 29, 2014
I have a existing code which copies data from one 6 workbooks to Main workbook.
Copying data from workbook 1:
It has Header at 2nd row and Data starts from 3rd row.
From A column to AG
Destination workbook: In this workbook. I have Header at 26th row From A to AG copied Data needs to be pasted at 27th row.
And like wise while continuing to copy datas from other workbook it will get added at last.
My code is working fine. But my requirement here is at Destination area.
Now i have moved Header in Destination workbook. Header is at 26th row
From A To Ag to D to AJ
Data needs to get added at bottom of each paste.
HTML Code:
rowofcopysheet = 3
Set copyrng = wkb.Sheets(1).Range(Cells(rowofcopysheet, 1), Cells(Cells(Rows.Count, 1).End(xlUp).Row, Cells(1, Columns.Count).End(xlToRight).Column))
Set Dest = shtDest.Range("A" & shtDest.Cells(Rows.Count, 1).End(xlUp).Row + 1)
copyrng.Copy
Dest.PasteSpecial xlPasteValuesAndNumberFormats
View 1 Replies
View Related
Mar 5, 2013
I have the following code to update a pivot table:
Code:
Dim pt As PivotTable
Application.EnableCancelKey = xlDisabled
For Each pt In ActiveWorkbook.Worksheets("sheet1").PivotTables
pt.ChangePivotCache ActiveWorkbook.PivotCaches.Create _
(SourceType:=xlDatabase, SourceData:="source!R4C1:R33443C55" _
, Version:=xlPivotTableVersion10)
Next pt
the R33443 term is what will be changing, the columns and the starting row should stay the same. is there a way to instead of using R33443, to enable the range to be changed based on a cell value?
View 2 Replies
View Related
Jun 15, 2009
I want to design a spreadsheet report, but instead of importing the data from an external source, i would like the data to come from another sheet within the same workbook. The goal is that the data sheet will contain only raw data with no formatting, and the report sheet will contain all the formatting.
View 9 Replies
View Related
Dec 6, 2006
I have one source spreadsheet, where are columns NAME, DATE. I read these data by ADO to other spreadsheet, where I can change/delete data and then run macro for update data in source spreadsheet. The problem: In source spreadsheet is column "NAME" and column "DATE", with values e.g. "Joseph"; 1.1.1980. I read this data to other spreadsheet, then I delete in it value 1.1.1980. When I run macro Update, it messages error.
Sub UpdateItem
...
.Fields.Item(1).value = activecell 'activecell value = "Joseph"
If Not isempty(activecell.offset(0,1)) Then
.Fields.Item(2).value = activecell.offset(0,1).value
Else
.Fields.Item(2).value = "" 'I tried Empty and 0 too but when I read data again then, it displays 0.1.1900, nothing works
End If
...
End Sub
It seems that in source spreadsheet has data in column "Date" format Date and when I try to update data in format String ("") in source spreadsheet by Update macro, it messages error. When I used
.Fields.Item(2).Value = Empty
' or
.Fields.Item(2).Value = 0
after rereading data it displays 0.1.1900 What I want to get is that if the cell with date (in other spreadsheet) is empty, the cell in column Date in source spreadsheet after updating will be blank (contains no values).
View 2 Replies
View Related
Sep 7, 2006
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
Thanks in advance for any help,
Jon
View 9 Replies
View Related
Oct 2, 2006
I have a source sheet which contains data. Within this data there is a column (column 3) called Name and I would like to take the data from this sheet and paste it onto a new sheet but in grouped format. So take all instances where it finds criteria 1, then 2 and so on and just paste it on a new line each time it finds a criteria. So far I have the following code to search
Sub loopy()
Dim rngTemp As Range ' the range variable declaration
Dim intCounter As Integer 'counter as integer
' the following loop goes through all the cells in column a up until the last used cell in the column
For Each rngTemp In Range("a1", Range("a" & Rows.Count).End(xlUp))
'increment the counter if the cell has value fridge
If rngTemp = "Fridge" Then intCounter = intCounter + 1
Next rngTemp
MsgBox "There were " & intCounter & " cells equal to Fridge"
End Sub
View 2 Replies
View Related
Jan 24, 2008
Sheet1 contains a chart using a dynamic name in Source Data: Values. The dynamic name data is controlled by another cell. When I copy the sheet - i.e. Sheet1 (2) - and change the control cell, the Source Data: Values in the copied sheet still refers to the original Sheet1.
View 3 Replies
View Related
Apr 14, 2013
I want to fill all a column bottom-up but without specify cells in format "A1500:A2" like
VB:
Range("H1578").Select
Selection.AutoFill Destination:=Range("H2:H1578")
{H1578 have a formula so...}
I have data in the first 7 columns, with a variable(Range) for the first 5 columns
VB:
Dim oRange As Range
Set oRange = ActiveSheet.Range(ActiveCell.Offset(0, 0), ActiveCell.Offset(89, 4))
{The first cell in it is A1}
My question is : How to fill Range("H2:H1578") using my ''oRange'' variable?
I try with OffSet but my code didn't work. I need to do the same with the 6 columns to the right and then plot in a chart.
View 4 Replies
View Related
Jan 11, 2013
I'm trying to make a spreadsheet that can be used to easily build a collective list of steps, for a user to read and follow line-by-line.
I want a source sheet of "steps" that I can change over time, and the resulting tabs that reference the source sheet get updated/populated automatically.
I've pieced together some VBA code from other sources, which kind of does what I want it to:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 And Target.Column = 1 Then
Dim SourceSheet As Worksheet
Set SourceSheet = ActiveWorkbook.Sheets("Steps")
Dim TargetSheet As Worksheet
Set TargetSheet = Target.Worksheet
Dim c As Integer
Dim Source As Range
[Code]...
But there are some problems:
1) The data auto-populates into a row. It would read better if each step was in the same column, meaning rows would need to be automatically added upon selecting something from the drop-down list. The number of rows that need to be added vary based on the number of steps in the source sheet, for the selection made from the drop-down list.
2) If you make a change to the source sheet, my goal is to have the other sheets referencing the source sheet's lists of steps update automatically, so you only need to update the steps in one spot and everything you've built from them gets updated instantly. Currently, you must select a different choice from the drop-down list, and then change it back, before it populates the "new" steps from the source sheet.
This is my first time using VBA.
What I have so far is attached: testAutoPopulate.xlsm
View 2 Replies
View Related
Mar 16, 2007
how to protect a worksheet from editing and at the same time allow all data source links within the sheet to be refreshed? I need my users to be able to refresh all data links as required but not be able to change the worksheet in any other way.
View 2 Replies
View Related
Feb 15, 2010
I would like a button in (Sheet2) to do this operation when clicked: jump to (Sheet1) and enter Sheet2's name into cell B4, where this button is used in many sheets similar to Sheet2(aka2,3,4,5,6...) that all do the same to jump to sheet 1.
View 2 Replies
View Related
Jan 21, 2013
I have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
View 4 Replies
View Related
