I have the following code that performs a row copy based on selected dates which is then pasted to another sheet as a report. I need to also perform the same copy from another sheet with the same structure so the All_Report contains the data from both sheets. The name of the other sheet to copy the information from is "Closed_Requests".
View 10 RepliesWhat i want to do is copy all records from whatever date i enter, onto sheet test. The full excel file has over 80 worksheets for each individual rep, the example i attached has 8 sheets..
View 9 Replies View RelatedOn sheet "CoA" i have at table of periodic payments that is created via an input form and what I want to do is have accounting entries automatically generated in my cask book based on dates.
The code for the input form is as follows;
I have a workbook containing sheet 1 and Sheet 2
The idea is to find the new references that have been created every month in sheet 2 and paste into Sheet 1. How to find the new ones is easy .However I don't know how to move the data around sheets!
Sheet 2 (A1: AQ25135)
A
B
C
D
FIND NEW PO
Purch.DocItem
Vendor
Vendor Name
200095185710
200095185710
15152695
UAB Pajurio Gabija
[Code] ......
I need to do the following:
Whenever you find the word "NEW" in a row of sheet 2 in range A2:A50000 copy the row from B to AM and paste it into sheet 1 Column A to AL.
However Column A contains already data. The data should be pasted right below the last A row with data
In sheet 2, column A contains the following formula
(=IF(B2>0,IFERROR(VLOOKUP(B2,Sheet1!$A$2:$A$20182,1,0),"NEW"),"")
The possible results are : Numbers>0, “NEW” and “” as you can see in table Sheet 2
I need to copy all the work sheets into one single work sheet (mastersheet). The source work sheets are having same column structure. The condition which i need to take care of is that after column 3 if at all there is any data till column 10 then in the destination mastersheet these should be copied in different rows with first two columns repeated. I need to do this using VBA macro.
View 9 Replies View RelatedThis code basically copies data from one worksheet to another worksheet based on the date and works great.
However, I have been asked to changed the format of the spreadsheet and the code needs to be changed. The code is in "This workbook".
The code takes the data from the summary tab and copies it to the archive tab. I now need it to take it from the summary tab and copy it to the archive 2 tab.
I have attached a copy of the spreadsheet. Data and Archive2.xlsm
I am trying to build a summary report that pulls from two different worksheets within the same workbook. Here's the context of my problem:
Worksheet 2: Column A has a list of dates. The corresponding information for each date is within the row. Sometimes, there are repeated dates with different corresponding information.
Worksheet 3:This is my summary sheet. This report needs to update daily and only pull data related to "today's" date. My question is if i have three rows with the same date but different data, how do i tell my summary sheet to display all three rows for that date. So far, I can only get it to pull the data from the last row with that date.
I have a workbook with 2 worksheets being used. Sheet 1 has the months of the year starting with Jan in A1, Feb in B1 etc. On Sheet 2, I have a column of information. The first cell in the column eg. B1 has data validation list based on the months on Sheet 1. The information in the rest of the colum on Sheet 2 needs to be copied to the relevant colum on Sheet 1
View 5 Replies View Relatedcopy the excel sheet data from one sheet to another sheet?
-> I have one excel sheet (name: Test.xls, sheet name: SHEET1)
Sn Code Type next calib
5BPR CORR7-Apr-12
4BPR CORR7-Apr-12
73BPR CORR7-Apr-12
9BRG CORR8-Apr-12
10BRG CORR8-Apr-12
11BRG CORR8-Apr-12
17BRG CORR9-Apr-12
311DP CORR9-Apr-12
227DP CORR9-Apr-12
227DP CORI R9-Apr-12
Want to create a new work sheet and copy the today's date(next calib - filed name) records to new sheet.
Example: Today's Date is 8-Apr-12
So, I want to copy following record to new work sheet (when I click the button / run the macro).
Sn Code Type next calib
9BRG CORR8-Apr-12
10BRG CORR8-Apr-12
11BRG CORR8-Apr-12
I have looked through the forum and found pits and peices but can not put the puzzle together. Found the VBA code in my example from a earlier post but there was no final answer to the post.
Trying to have the user put in a date range via command button. Fro mthis date range the data thats falls within that range is copied to a report sheet. Will also need to have all the old data from a earlier querry removed. Have attached example sheet.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I need macro to copy values from a Master worksheet on a daily basis, and paste them to multiple individual worksheets in cells adjacent to today's date (already crafted). For instance, a value of 8 is entered into a particular cell in the Master, it is copied and pasted into column E of another worksheet, on the row with today's date already written in column B. I need to do this repeatedly for over 50 worksheets.
View 2 Replies View RelatedI have date data in Column O, which appears like. At any given point in time, i would have such date data for 5 to 10 days, and I want to just assign 1 to first date, and next date to 2 and so on.
What formula (can i use RANK formula, and how) I can use to get the desired result. SEcond part of the query may require macro, so will ask later.
Basic Data Desired Output
Column O Column P
20-Jan-13 1
20-Jan-13 1
20-Jan-13 1
20-Jan-13 1
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
21-Jan-13 2
22-Jan-13 3
22-Jan-13 3
22-Jan-13 3
22-Jan-13 3
26-Jan-13 4
26-Jan-13 4
26-Jan-13 4
26-Jan-13 4
I have a template with a sheet dated the 1st of the month "Feb 1" Cell 2 also had the same date.
I'd like a VBA to copy this sheet, change the sheet names to Feb 2, Feb 3, etc, and also change cell 2 to the same name...
I've seen similar code to copy sheets and change name, but can't figure out with the date...
A pop up asking for the number of new sheets would also be useful.
ExcelForumSample.xls
I am having trouble with IF, ELSE and END IF statements. In Column H I am trying to copy over rows to sheets based on value according to ranges. I am trying to use the code below but everything seems to get copied in to the first sheet "0-500". d= worksheet name.
View 6 Replies View RelatedI currently receive a download that contains multiple reports in one excel sheet. Each report is separated by the value "Vendor" in column A. I would like to separate each of the reports into a new excel sheet. Basically, I will need to copy all rows between "Vendor" and "Vendor" values and paste to a new sheet.
View 2 Replies View RelatedI have a script that generates various worksheets based on the day and puts these in folders based on the year/month/day. So a report run today would be in the F:200817 folder.
At the end of each month and then again at the end of the year I need to pull all the reports into a single workbook. The macro I have now allows you to select the folder you want to import the sheets from, but it doesn't recurse subdirectories, so I can only import sheets from a specific day into a workbook, but not from a month/year.
I have a list of names in sheet1, starting with cell A3. I would like to copy sheet3, insert it after sheet3 and rename the sheet to correspond to the names in the list.
If i have 30 names I would like 30 sheets. If i add a name, I would like to repeat the copy, insert and rename steps for the extra names as i add them.
I have attached a file showing what I would need the output to look like. I need to know how to search a range of cells (in this case column E) and if the day of the week is Wednesday to copy that entire row to the Worksheet titled Wednesday. I would do it manually but I have several thousand rows of data to get through, and there has to be a better way.
Example.output.xls
I am trying to find a way to copy the contents of an entire row to a new sheet in a workbook based on the value of a column, specifically column K with the value of "good". There are 3 sheets that im searching. This is where I run into problems. Im looking to start with sheet1, and copy all rows deemed "good" into entries on sheet 4. Then search sheet2 and copy all relevant entries into the next available row on sheet4, and then repeat on sheet3.
View 2 Replies View RelatedCurrently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain()
Application.ScreenUpdating = False
Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range
findThis = "1"
[Code]....
I am trying to drop (paste) in new data in a range in sheet 2 and cross reference a column with a table in sheet three and display all rows of matching instances in sheet 1. Example:
Sheet 3 has
a1 b1
amcdap amber connor
apsdap ashley simpson
sheet 2 has
a1 b1 c1 d1 e1
amcdap 300 400 2:00 9:00
apsdap 500 300 4:00 8:00
capdap 200 300 5:00 9:00
dlsdap 400 300 2:00 8:00
I need to return only rows 1 and 2 to sheet 1. I guess ideally I'd like to drop data in sheet 2, click button.
I have a workbook that includes 4 seperate sheets that are used to record time and expenses for 4 members of staff. I want to write a macro to select the data I need from each sheet and colaberate together in a 'data' sheet so I can combine all the info to run time and expense reports per client showing combination of all time and expense incurred from all 4 staff.
I have named cell ranges in each of the 4 time-sheets. I proceed to record a macro, select the first named range, copy and paste into my data sheet, do a control home then control down arrow, then one more down arrow to get to the first blank cell and repeat the process for all four time-sheets.
This works until I add a new line and then the data will only appear for the last time-sheet (last row of data).
We have folders of daily cash collections stored in such a manner, yearmonth. In every month, we will have worksheets sent by the end user to the finance dept, naming it using mmdd. (The folder in the drive will reads: C:Daily Cash Collection2013), (C:Daily Cash Collection2013 0104.xlxs), (C:Daily Cash Collection2013 0115.xlxs). I intend to put the master list outside the year folder, meaning, in the Daily Cash Collection folder (C:Daily Cash CollectionDCC_2013.xlsm). When I have a new folder for year 2014, my master list will be here (C:Daily Cash CollectionDCC_2014.xlsm)
I am looking to automate this opening of all the daily worksheets, select all data except the header row, and copy it into a master list (which will be data for the whole year, with 3 months of the previous year data).
The data in the daily sheets, it will have collections of the same Debit Note number from the file sent earlier. Meaning, if the file was sent on 0104, there is a DN0114-0002, collection of $50. In another daily sheets 0115, it will also have a collection of DN0114-0002 of $20. This 2nd information of $20 will also need to be captured as the payment in 0301 is partial and incomplete.
I will need to copy the daily sheets into the master list every now and then. Is there a way to check and copy the daily sheets and not repeating it and missed out one?
In another words, if I had already copied Jan sheets into the master list, will it look for the next worksheet that I had not copy and copy according the DN number? (it will be in running number but sometimes will have DN of the previous month due to the partial payment ealier).
Alternatively, if this is too complicated, how to insert a macro to copy all cells except the header (will be in fixed column and the first row will be fixed) from an open daily sheet, find the last row in the master list and copy it to the master list, and after copying, unclear the selection of the daily sheet and close the daily? Where can I put this macro as the daily sheet is from the end user. I can only put it into my master list, but my problem is, the file name of the daily sheet is not fixed, it depends on the day the end user saved and email the data to Finance Dept.
DCC foler.jpg
I am having rows of data, that i will be updating from time to time. I want excel to move the latest updated rows, in any column if updated, to move to the top, to easiy know that i updated those records. It should be that when i updated more rows than one, then the first updated cell would be in lower, in order, than the latest updated cells. I do not want any cumbersome vba. I want in formula or in conditional formatting. The row no may be total not limited to some rows.
Because, you naturally would have updated the 200 th record and would have saved. It saved as it is, so when you next opens it it is there, but how can i know that that is the last row of data i edited.
I have an excel document with multiple excel sheets(sheet1, sheet2...etc), now every sheet contains a cell "total".
Now I want to copy the row containing "total" from all the sheets into another sheet called "report".
Copying data from one sheet and pasting it in different sheets with names.
For example : i have data which has details of all GL account and i want to segregate the data GL code wise into different sheets in the same file with the gl code name.
I am writing a vba code where i want compile data from different excel files.
Private Sub CommandButton1_Click()
Application.DisplayAlerts = False
Application.ScreenUpdating = False
[Code]....
I have been using this code to compile data but now i want if sheets data is less than 10 so do not copy..
I have an application that creates a new worksheet in Excel each time a particular event happens. My processing is centred on a single master sheet into which I want to copy selected data from each newly opened sheet from the external application. Data from the next `new' sheet would replace the older data previously copied into the master sheet as the external application marches through the sequential series of events (or I could clear the master sheet cells after each cycle is complete).
So in essence I need to
a) Recognise the creation of a new sheet by the external application and make that the active sheet
b) Copy data from selected cells in the new sheet to fixed cells in the master sheet, overwriting previous data .
c) Carry out some operations
d) Delete the active sheet when those operations are finished.
e) Await the next new sheet from the application.
I'm trying to pin down an answer to a, b d, and e.