Copy/Paste Rows By Numerical Range In Column
May 8, 2008
I would like it to scan an entire column (column E) for rows of data that fall into a range of numbers chosen by the user (like maybe a list box or combo box in sheet 1) for example a number greater than or equal to 8 but less than or equal to 15 and copy all of the rows and columns of data across the entire sheet that fit the range from sheet 1 to sheet 2. I would like to use a separate list or combo box for the min and max values in which to search as seen in the example sheet 1 attached. I have tried the autofilters, custom filters and macro recorder with no success as it seems the filters do not like ranges of numbers.
View 3 Replies
ADVERTISEMENT
Apr 10, 2014
I want do copy a range and paste to a specific range. So if the copy selection is larger I don't want it to paste the rows that don't fit.
With this code it copy a range and paste even outside my given paste range.
VB:
Range("F33:H60").Select
Selection.Copy
Sheets("7211").Select
Range("F33:H40").Select
ActiveSheet.Paste
View 4 Replies
View Related
Apr 22, 2005
How do I create a macro that takes the 3 digits values in cells Q82:AJ86 and place them is column L, set code to start placing result in L38?
example
Q82=610
R82=611
S82=612
T82=613
Results
L38=610
L39=611
L40=612
L41=613
View 9 Replies
View Related
Sep 16, 2006
I dont know if a vb code is at all possible to copy a formula in a cell in row 2 straight down that column until the last unhidden row in which there is at least a cell populated with values from the 256 cells in that last unhidden row. Then in that column, I want the cells that are filled with formulas to be converted to values.
All these unhidden rows are autofiltered with certain criteria. The left and right columns to the formulated cells does not necessarily filled with values as they can be blank. Row 1 has header names, and a formula can be any cell in row 2 at any one time and that is exactly the problem i faced so that to record a macro seems totally useless for me because the cell in row2 where I will begin with a formula varies every time.
Currently I go a long way by taking these steps:
Hghtlighting row1
Data/Filter/ Autofilter/
Select the header cell and click on drop-down filter
Select (Custom...) with criteria
Input formula on the cell in row2
Copy the formula
Press Shift+ArrowDown keys until the last unhidden row
Press Enter
Undo Autofilter
Select the column
Copy and Paste as values
Autofilter row1 again
Select the header cell, (Custom..) equal "#N/A" and "zero"
Continue next turn of formula..copy to last unhidden row, paste as values....
Me and other staff in my department are doing these long-winding steps endless of times, day in day out, until we are drained out and called quit. If there is a code that can do this, this is going to the greatest news ever for these people for that kind of work.
View 5 Replies
View Related
Jul 26, 2009
I have one column of names in excel. The column may contain more than one row with the same name but these rows with the same name will all be grouped together. This is an exampe (each name represents a row in column A):
ColumnAColumnB
andrewData
julieData
julieData
julieData
jonathanData
jonathanData
What I want to do is copy the rows with the same information, e,g, the rows with 'julie' above, paste them into a new spreadsheet and email this spreadsheet to specific email addresses and then do the same for 'jonathan'.
I can work out how to send an email using VBA but I am really stuck as to how to go through the rows and send the email in discrete 'chunks'. I have tried using a for next loop, looping through the rows and copying/pasting rows that are the same as the previous one into a new spreadsheet but this does it one row at a time.
If I include the instruction to email the spreadsheet within the loop this would also email the new spreadsheet one row of information at a time, i.e. three emails for 'julie' each containing a spreadsheet with one row of information on it, rather than one email containing one spreadsheet with all three rows on it.
View 4 Replies
View Related
Mar 13, 2009
I am trying to get excel to search a workbook/(or worksheet if easier) for a matching unique value and fill in its associated data. My first workbook has the SKU (A) filled in but not the UPC (B). My second workbook has both the SKU (A) and the matching UPC (C) filled in.
I need to take both workbooks/(worksheets), compare the SKUs, and if a matching SKU is found, extract the UPC from Workbook 2 and fill in the UPC field in Workbook 1, and if no UPC is present in Workbook 2, then it leaves the cell in Workbook 1 blank.
View 2 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Oct 26, 2013
I am trying to create a macro that will reformat my data from A2:QB24 into 9 columns starting in N28:V28 with the data from every 9 columns pasted underneath each other.
Basically, I need to start with copying Range A2:I24 and pasting it into cell N29, then copy Range J2:R24 and paste it into cell N53, etc.
View 2 Replies
View Related
Aug 8, 2006
Ive been trying to find out how i can paste information in the next available column but between certain columns. Here is an example of what im trying to do. There is a calculator which represents 3 machines. It runs different senerios if you change the % of product going into it (cells to change this are light blue). What im trying to do is take the information the machine outputs to the right and organize it on the next worksheet.
The data on the next worksheet is a combination of all the machines performance (in yellow) together and the machines personal performance (in red). when the button is pushed currently, I have the overall scenerios information filling down rows. What I would also like it to do is see if im using a machine (because it can be turned off by changing the usage to 0%), and if I am, copy the results form the individual machine to the next worksheet. When it copies it needs to see if the first machine slot is open and if not the second and paste in the available location. I cant have a specific spot for each machine on the real worksheet cause there are maybe 100 machines and if 15 are used I only want the first 15 machine info slots filled and im gonna hide the rest of the columns. The way the columns fill also cant be like the rows where it looks for next available free spot. It has to only be for the specific range in red because there is info to the right of where this is going.
Sub Send_Data()
Sheets("Calculator Sheet").Select
Range("AD9, AE9, AG9").Copy
Sheets("output sheet").Select
Range("B65536").End(xlUp).Select
ActiveCell.Offset(1, 0).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
View 2 Replies
View Related
Feb 8, 2009
Need to sort my data in column A which contains a long list of numerical data. To do this manually using copy and paste would be easy, but not viable because of the large amount of data.
The attached PDF file illustrates the data. I wish to replace each date of dirth entry in column A (one D.O.B. in each cell / row, expressed as YYYYMMDD) with the client identifier number (format 937XXXX) a couple of cells above. And at the same time delete the row containing the client reference (or its contents). The data in column A should retain the same relationship to the data in the other columns (B,C). it may require a short piece of VBA code.
View 3 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Mar 17, 2014
Please see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
View 3 Replies
View Related
Oct 25, 2005
I have a single column of numerical values that may repeat many times within
the column.
I require a flexible Formula:
Use an Input Cell for the specified and changeable Percentage(s) %.
Column may be filtered – so only take into account Visible Filtered Cells.
The Formula will calculate and Return the numerical range of values that fall
between the specified percentage % (using the Input Cell) e.g.; 70%.
The Formula should Return two numeric values: a Start Value and an End Value
– NOT necessarily the minimum and maximum per se BUT the MIN and MAX of the
values that appear 70% of the time in the column; therefore, taking into
account Repeat / Duplicate values.
The calculated Results: the two numeric values will be returned to separate
cells on a new Sheet.
View 9 Replies
View Related
Jun 1, 2008
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
View 9 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Sep 6, 2012
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies
View Related
Apr 14, 2014
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
View 10 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Aug 15, 2009
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 A 3 a1
row7 B 1 a1
I'm trying to do is set up a VBA code that will take lines lines 2-4, copy the rows and then paste them in new rows every other row for the rest of the document, so that it appears as...
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 data data data
row7 data data data..............................
View 4 Replies
View Related
Nov 18, 2009
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies
View Related
Jan 22, 2007
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
View 9 Replies
View Related
Mar 16, 2013
Trying to assign code to comm. button on User form to copy lets say:
(sheet1, rangeB2:B21) to (sheet2, first blank row rangeB2:B21) and paste it as text value one more question: what to be aware in case of sheets format (merged cells, hidden rows...)
View 4 Replies
View Related
Oct 7, 2009
Need a code using application.inputbox to get a range, then use that range to copy and paste the range's link and format to a different sheet? The specifics don't matter, I just can't figure out the syntax. Here is what I have currently:
View 2 Replies
View Related
Oct 2, 2008
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
View 5 Replies
View Related
Feb 19, 2008
I have been struggling for a while to copy data from one worksheet to another and reset the target range.
The copy bit is cool, the range resetting bit is not. I have tried various methods, but none seem to work.
For example, the below code generates an error: "Compile error: Argument not optional"
I have stuck the particular command button script below to let you see what I am trying to do:
Private Sub cmbFilter_Click()
Dim sCriteria As String
On Error Resume Next
View 4 Replies
View Related
Mar 3, 2008
I have the following code that let's the user choose and " import" data to an existing sheet. It works well up until now. The problem is that the three ranges that I am trying to copy the data from on workbook to another has changed size. In previous version of my workbooks the range was two columns by 10 rows. Now, it is 1 column by 10 rows. So, when I run this macro it doesn't work because the two ranges are different. Is there any way to:
1) Only copy over one of the rows of a range thus making the macro run?
2) Do not run that part of the macro if there is an error?
Thanks so much for reading this long-winded description but the error is a big problem
Private Sub CommandButton1_Click()
Import_Data_Form.Hide
Run "UnProtectAll"
Set b = Selection
ad = b.Address
' Local Variables
Dim wkbDataFile As Workbook
View 4 Replies
View Related
Jul 22, 2014
I am currently working on a bid sheet for my company; the accounting department has new software and they need me to alter my spreadsheet to fit a format that is suitable to import into their system.
I will try to explain this as simple as possible (I have attached an example spreadsheet as well)
Sheet1: Estimate
Sheet2: Cost Code Import Sheet
I need to take the information from Sheet1 and have it converted to fit sheet2 and there are a few issues I'm having:
#1 I need the line items in column B on Sheet1 (B2,B3,B4) referenced on Sheet2 but every 4 rows (E2,E6,E10)
#2 Now that I have 3 blank rows between my line items, I need to reference the cost amounts in cells F2,G2,H2 (sheet1) onto sheet 2 (D3,D4,D5)
so far, I have been changing the reference in every cell, and I have hundreds of line items... I do not think I will maintain what little sanity I have left if I continue doing it this way
View 3 Replies
View Related
Jun 30, 2008
I'm currently using the below code to add the formula in each cell. Depending on the number of rows.
It's very slow (Range("aa2").Value returns 1060) which means 1k rows. I was thinking of doing copy and paste to speed up. But I do not want to fill the whole column U (Column 13) with the formula. Is there anyway to set the max to copy to?
like r2:rX
where X is Range("aa2").Value?
Private Sub CommandButton1_Click()
Dim nDb As Integer
intRow = 2
Range("aa2").Value = "=COUNTA(A:A)-1"
nDb = Range("aa2").Value
View 9 Replies
View Related
Nov 22, 2008
i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".
View 4 Replies
View Related
Oct 4, 2013
In sheet "diary" I have data in certain rows in column A8:C10000 that contains values if a certain condition is met. I need a vba to copy and past only non blank cells in column D8:F10000. I first wrote a formula with index but it takes too long to caculate.
View 9 Replies
View Related
