VBA - Copy And Paste Rows Based On A Condition?
Apr 19, 2013
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB:
Function DoOne(RowIndex As Integer) As Boolean
Dim Key
Dim Target
[Code].....
View 3 Replies
ADVERTISEMENT
Nov 7, 2011
[URL]
I have run into a problem which is quite unique. I have data for 40000 football matches. The Sheet "Raw data" has the raw format of the data.
Sheet "Goal Difference (Home - Away)" is pretty important. This sheet is the goal difference between the home team and the away team. "A5:A95" has the number of minutes in a football match and we are trying to track the way a team progresses throughout the match. Lets assume the score is 0-2 for the 1st match and the goals were scored in "39, 76," minute by the away team. So the data will read 0 from 0-38, -1 from 39-75 and -2 from 76-90.
Sheet "Red Cards conceeded_Home" tracks the number of red cards as the match progresses through 0-90 minutes for the home team. The catch here is if the score reads Red Cards : "1 - 2" and the Red Cards Time reads "26, 15, 18". The red card was issued to the home team at 26th minute, The away team received it at the 15th and 18th minute. So the data will read 0 from 0-25, 1 from 26-90.
The same applies to the other tabs.
View 1 Replies
View Related
Jan 25, 2010
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies
View Related
Nov 7, 2012
Basically, I need to copy and paste upon certain condition (references) and paste related-datas in another sheet corresponding with these references. Every references are organized by lines with indicators on columns.
In attached file, see:
- worksheet ANALYSIS:
* datas in E2, G2, D18, D19, D20, D21, D22 that needs to be copy based on reference in C2,
* then need to find this reference in worksheet called GROUP SAVE,
* and based on this reference, paste above cells value in corresponding "Indicators" column number
THEN, I will have to do pretty much the same with subgroup data. But I can figure out for this second step that request same manipulation.
View 3 Replies
View Related
Sep 18, 2009
I have created a worksheet which contains seven columns of data and many rows. I need to copy entire rows into nine separate worksheets depending on the data in column G.
I know nothing about VBA but have read enough to realize this is the way to go with this. Would someone point me in the right direction on how to set this up? I've attached the file so you can better see what I'm talking about.
View 5 Replies
View Related
Nov 20, 2012
I have multiple sheets with the same format.(all columns have same format) in column "A" i have a value lets say "B1-1".
What I need to do is to copy from all sheets the rows containing in column "A" the same criteria("B1-1") to a new sheet and skip the rows that have a blank cell in Column "A".
View 5 Replies
View Related
Feb 4, 2010
I am self-taught (arguably by a pretty shoddy teacher), and am determined to figure *some* of this stuff out. I need a code to look at the rows on one worksheet and based on the value of column A for each row, copy cells A through E in that row to cells A through E of a blank row on a corresponding worksheet. I found a code from another post that does just what I need it to with one small exception. The code was posted by DaveGuggs and is as follows:
View 2 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Mar 5, 2009
i want to copy a row from one sheet and paste it in another sheet based on a condition.
View 5 Replies
View Related
Mar 19, 2014
I have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
View 14 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Sep 8, 2009
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
View 9 Replies
View Related
Apr 15, 2008
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
View 6 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Mar 19, 2014
I need some code vba to copy & paste data with filtering condition....
See workbook : upload paste visible.xlsx‎
View 5 Replies
View Related
Apr 25, 2014
I am using below code to copy data and paste after a certain row. I want in below code first copy data Range("C4:R46") and paste it automatically 50 times after 43 rows but with this condition.
[Code] ......
View 2 Replies
View Related
Mar 13, 2014
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
View 2 Replies
View Related
Jan 6, 2014
I have following set of data...
Row#2 Gets information from another database depending upon country and product code. In example Country is India and Proudct is brake. From source it will fetch info.
Starting Row#6, all the products are listed down. My requirement is what ever the data gets reflected in Row#2, should get copied and pasted to corresponding product code starting Row#6. In this example I have highlighted Brakes product data.
So when product in B2 is TEE, the corresponding Row#7 should get values only from Row#2..
A
B
C
D
E
1
Country
Product
Q1
Q2
Q3
2
IN
BRK
63104.91
60236.51
60236.51
[Code] ..........
View 5 Replies
View Related
Feb 18, 2009
I have a spreadsheet that I need to cut and paste data from one tab to another but only from columns B:K (as the spreadsheet has formulas that can not be alterred after column K. It must also paste that data for the hidden columns.
The condition on the data to be pasted in based on the tabs along the bottom.
So for example, anything that says Corn Products needs to be cut from the "standard customers" tab and moved to the Corn Products tab, and so on for the additional tabs.
I then need to un-check (hide) Blanks from the filter on the Standard Customers tab.
If possible, I would like run the Subtotals function in this same macro; the conditions for that are as follows
For each change in Shipper, Subtotal Billing for <<month>> (Column S)
Page break inbetween each Change in Shipper, then I would also like each subtotal figure bolded.
Also, this is something I must do every month, and each customer may have more or less lines or no lines at all in any particular month.
View 14 Replies
View Related
Sep 17, 2013
I need to copy the row data from sheet1, if the DEPT is HR and paste the same into sheet 2.
Qus:
data table ( Sheet 1)
SLEMP IDDOJ DEPT
1123419/17/2010HR
2123429/17/2010HR[code]......
View 1 Replies
View Related
Feb 29, 2012
I need to copy and paste data with imposing a condition from one worksheet to the other. I also need a code to update an existing condition.
Code:
Sub COPYPASTEDATA()
Dim rcnt As Variant, i As Long, j As Long
rcnt = Range("A" & Rows.Count).End(xlUp).Row
j = 4
For i = 2 To rcnt
[Code] ........
The procedure does not update the changed condition ( I have pass/fail as condition). Once you run this macro, the data will be pasted but when you change a condition from "fai" to "pass". The pasted data in sheet 3 is not updated. I either need worksheetchange procedure or maybe a code to delete (refresh) sheet 3 data before running the existing macro.
I have Name, location, status (pass/fail) and comment in columns A, B, C, D in sheet 1.
View 1 Replies
View Related
Dec 4, 2013
I am using the following code to update an invoice summary sheet from an invoice sheet but when a Credit Note is issued I would like the Nett� value copied across to be a negative figure. When a credit note is issued the value of Service Invoice Cell L2 = 2 and an invoice L2 =1.
VB:
Sub UpdateSummary()
' Updates Summary Sheet with Invoice Details
Dim InvoiceDate As Date, InvNo As Integer, JobNo As Integer, Company As String, Location As String, Nett� As Currency
[Code].....
View 4 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Mar 12, 2002
I haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
View 9 Replies
View Related
Jun 17, 2008
I'm looking to create a macro that copies a row of data and pastes it within a range when a condition is met. For Example, if A1 of the header Row matches A2 within a Range of A2:A100, I want to Copy the A1 Row and Paste Special Values over the Match in A2. Likewise if the match is contained in Row 100, I would like to Copy from A1 and Paste Special Values into A100.
View 2 Replies
View Related
Jan 16, 2009
I got this code form Ozgrid that works great other than everytime I run the macro it copies everything over again.
View 3 Replies
View Related
Mar 8, 2008
I deleted the data and made up some figures but kept the format to protect privacy. Highlighted blue and green because it's possible to have the same name have 2 different types. I put in dashed lines to more clearly divide months.
1. For each UNIQUE "Name" and "Type" add a new row starting from last entry
2. Copy A,B,C to new row
3. Copy LAST (most recent) "End Balance" from column "I" corresponding to last person
4. Copy column "I" formula into new role
So Name, ID#, type, column D and the formula in "I" (excluding "Name" and "Type" duplicates) should be added to the end of the sheet with their new row
Unsure if possible:
5. Make old amounts (columns D,F,H,I) not count towards the totals
6. Totals reflect new amounts only so values aren't counted multiple times
exampleforforum.xls
View 2 Replies
View Related
Jun 6, 2008
I Have workbook-1 with 5 cells and 10 rows and in 5 th (E) cell i have value of 1 or 0 .
i want to selectively copy entire rows which has value = 1 in cell(E) and paste these rows into 2 nd row(A2 cell) of workbook-2 using Macro
View 5 Replies
View Related
Aug 11, 2008
On my main worksheet, I have a list of stocks in the "A column", so for example reading down the list would be:
Vodafone
Vodafone
Ericsson
Nokia etc...
I have a seperate worksheet for each different name (about 100), and I wanted to know if there was a way to select all the information relating to the name "vodafone" for example, and to copy and paste that into the worksheet called vodafone. The problem is copying and pasting 100 times would take ages and wanted to know whether there is an easier way using VBA.
View 3 Replies
View Related
