I would like to do now would be to only copy the rows that also contain the word sold in column C. I guess that I could do this in two stages, first copying the rows based on the year then copy again based on the word sold in column C. It would be nicer to make a slight modification to my code and do it all in one step.
View 2 RepliesI will have 2 columns. In column B, will be a list of invoice numbers. Now each one starts with the "job number" (Ex. 51APGC01) then a dash and unique number per invoice. (Ex. 51APGC01-01)
In column A, will be a list of Purchase Order numbers sent by the customer so we can bill. Now, sometimes we get one PO for multiple invoices, (Ex. 03, 05, 06, 07.....)
What I am looking to do, is when I get these PO's, I enter them in and then I print a report for our billing Dept. The way the output line (cell) will read, is Job Number, then each unique number: (51APGC01-03, 05, 06, 07)
There are multiple jobs and each one has it's own report, so the job number will be dynamic and defined else where in the workbook. I can define that. It's just getting the numbers after the "-" and putting them in only.
Basically lets say I have in cell A1 to A10 floor access data i.e. Users who used their ID cards to access a room.
Now the data always starts with either Rejected or Admitted then the user's name and then the card number and the access floor etc. the card currently has.
What I am looking for is that the macro should first check if the cell has Rejected or Admitted written in it - this I can do myself using =Left(A1,8) which should give me the helper column I need.
Then based on this I want it to only copy the name of the individual i.e. it should look in the cell and only copy whatever is written between "Rejected" and "(Card". The cell data is something like this:
Rejected Doe, John (Card #123456) at ABC 123 Floor1/Floor2/Floor3/Floor4 Door 1 [In] [Clearance]
if colum s has a n then can i copy that entire row to a new sheet
View 9 Replies View RelatedI wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
In column A, i have cities.
In column B, i have dates.
I would like column D to have both the city and its corresponding date e.g. "paris (12/06/2013)"
However, I am getting "paris (41437)". Is there anyway to make the date appear properly?
I'm using excel 2010 and windows XP with a moderate amount of experience tinkering with macro programming. I know what I need is very doable but I can't get my head around what the code would look like. I must not be wording my searches correctly because most of what I'm getting for results are iterative programs based on a cells value which isn't what I need.
I'm trying to build a macro that will check a cell (C3) and based on the contents of that cell copy a column (I) to one of 12 different columns (K:V). So if the value in C3 is 1 it should copy I to K, if the value is 2 it should copy I to L, and so on.
I have a list of about 2 million phrases. The list was created by combining two lists in all possible combinations:
a list of about 800 street names
a list of about 1000 property names
example
church street flat
church street apartment
house church street
house king's road
etc
what I would like excel to do is the following:
look at each cell and determine which of the 800 street names it contains. write that streetname into adjacent cell.
this would then leave me with the original column, where each of the 2 million cells has been assigned one of 800 streetnames.
for example:
church street flat | church street
church street apartment | church street
house church street | church street
house king's road | king's road
that's all. I think that can't be too difficult, and probably it has already been discussed here in the forum. unfortunately I did not know for which keywords to search, that is why I couldn't find the posts.
I hope somebody can help me as I need to get this sorted for work as soon as possible. All semi-automatic ways I could think of to accomplish this would take me days that I don't have.
Need VBA macro that will copy & paste (Special > AS VALUES) from one of two (Data A & B) sheets based on the contents of a validation cell ($D$4) in a third (Report) sheet? The destination starting cell would be $F$11. ALSO - I'd like to have the Named Ranges "DataAExtract" & "DataBExtract" used in the code (for the COPY region) so I can see an example of how to reflect my actual named ranges in my working file.
The reason for doing this is that the "c.Characters...." lines in my conditional formatting macros (attached) are not working on cells containing formula output (in my working file the Report page is all populated by VLOOKUP results), but the macros run fine on hard-coded values. In my attached workbook, I'd like to have the "NEW" macro for the copy & paste step fire first in the sequence of macros running after the FORM button-click (control located in cell $D$5 of the Report sheet), whether that's by writing a new macro and calling mine before the new one ends, OR by consolidating all of my macros plus the new one into one smooth progression.
With this low-tech approach I can get updated VALUES into the report area once the user selects a data source and a customer on the report sheet. The COPY ranges in my working spreadsheet will update based on the selections made in the report page. I tried recording a macro and then modifying the recorded code to add the "If > Then" functionality I'm looking for, but I'm pretty green when it comes to VBA code and syntax.
I am working on a sheet where I want the contents of cells D1:D10 appear if cell A1 has a text in it and the contents of cells D1:D10 disappear if cell A1 is blank. What is the right conditional formatting formula for this.
View 3 Replies View RelatedI have a spreadsheet that has columns stating both status and then further to the right in the row, currency totals. There are only two status options, Stocked and On Order. I need to add the total currency amounts based on this other column's listing and it must change if status changes.
(Put simpler:
Column A lists Stocked or On Order and Column B is the currency tied up in that row.
I need to make totals for the cells in column B based on the status listed in Column A and it must change when Column A is changed. This should result in two totals, one for Stock Status Currency and one for On Order Curreny)
Setup: I have 2 worksheets with between 8 and 9,000 rows on each
Column A in both worksheets Sheet1 and Sheet2 have an email address in them.
Not all addresses in sheet1 will be on sheet2 and visa versa
Column J on Sheet 2 contains a date
What I need: Column M on Sheet1 is empty
I need a formula to place into Column M on Sheet1 that will
Look at Sheet1:A
Locate the corresponding value on Sheet2:A
Pull the date from Sheet2:J same row into Sheet1:M
I have a script that copies data to files based on many cells contents but where I am having a problem is creating series numbers for each file.
File-01.txt
File-02.txt
..
File-100.txt
In my current code I copy files to folders by date and each folder I need series of files (Lab Testing series)
In column A1:A100 I have a series of numbers 01, 02, 03 ...100
Column B contains the Files to be saved
C:LAB2012Jan1file-01.txt
C:LAB2012Jan2file-01.txt
C:LAB2012Jan3file-01.txt
C:LAB2012Jan4file-01.txt
...
..
C:LAB2012Dec31file-01.txt
So this works fine
I now need the Script to do is to loop to Column A and select Cell 2 and do the File Copy again on the Next series
C:LAB2012Jan1file-02.txt
C:LAB2012Jan2file-02.txt
C:LAB2012Jan3file-02.txt
C:LAB2012Jan4file-02.txt
...
..
C:LAB2012Dec31file-02.txt
When Complete repeat until it reaches the end of column A
Since my Cells are populated by all the data in the workbook I thought at the end of my copy script I would take the next Cells data in A and put it in Cell H8 where all the constants are for the file names.
Column B is built using
=IF($C1="","",$I$1&$G$4&$D1&""&$I$8&$H$8)
=IF($C2="","",$I$1&$G$4&$D2&""&$I$8&$H$8)
I'd like to format (colour fill) C1 when H1 contains the word "Bills"
I've tried to "use a formula to determine which cells to format" but it keeps using absolute references ($H$1).
Ideally I'd like to apply the "format" to the entire column C.
I did think I'd be able to use OFFSET but it's not working.
I have data contained in 4 columns. Column A is name, Column B is ID, Column C is Company, Column D is amount. There are duplicate names in column A and duplicate ID's in column B (ID's have correspending Company Names in Column C). I want to have a list so that this combination shows up only once, and then the amount next to it will be the sum of all.
Example:
DataABC DTom9730-003Company B100 Joe10242-001Company A200 Tom9730-003Company B300 Joe10242-001Company A400 Sam9730-003Company B100 Desired ResultTom9730-003Company B400 Joe10242-001Company A600 Sam9730-003Company B100
Is it possible to place formulas in vba to control cells based on the cells contents.
A2 will be the the price of an item excluding vat and b2 will be the price of an item including vat
What i want to achieve is if I put a figure into a2 b2 then multiplies a2 by 1.15 to reflect the price including vat. If this is achievable I then want to reverse the proceedure so if I put the price including VAT into b2 a2 divides b2 by 1.15 to reflect the price exc. VAT.#
if all of the above is clear and possible I would like to know if it is easily possible to copy the workings for a3, 4 ,5 ,6 etc and b3, 4, 5, 6 etc.
I am just learning VBA. I need to move to a cell location that is named in a range. As follows:
The cell "Sheet2!A1" has a formula that results in "Sheet1!B3". I would like my VBA code to read that cell and select Sheet1!B3. When using something like:
Application.GoTo Range("Sheet2!A1")
I end up of course at Sheet!2A1. I want to end up at Sheet1!B3 or wherever the cell reads at the time the code is read and operated on.
I have a worksheet that I've applied conditional formatting to which works very nicely apart from when I use the formatting and apply it to a cell based on the contents of another.
What I don't understand is when I put a formula in cell b1 to read =$a1="yes" and format accordingly it works. So when I type in "YES" in to cell a1 ,cell b1 is highlighted. When I type in "NO" the B1 cell isn't highlighted which is what i would expect. IF however I delete what ever is in cell A1 the cell B1 is still highlighted.
Have a slightly unique issue that I can't seem to find the specific solution for. I am wanting to filter a range, using row 1, then copy the visible cells (Excluding the title row 1) and paste into the same location, so over the data as Values.
I can do the filtering part and the selection of the visible row. Only trouble is pasting it to the same location.
this is the code so far - anything better would be great
Sub Macro2()
Sheets("GF_Scoring Database").Activate
Dim extvalue As String
Dim rng As Range
[Code]....
I have just started to learn how to use vba in microsoft excel. Over the past few days i have been creating a drawing register and have incorporated multiple routines based on searching this forum. Up until this point i have foud everything i needed on this forum, but now i cannot work out how to creat a routine that does the below.
The setup
*I have a folder called Zircon Plant
*That folder contains 3 folders 01. Superseded, 02. PDFs and 03. Documentation (the 01. Sup...etc. is the actual folder name, the 01, 02 and 03 isnt distinguishing the 3 folders)
*The Register is located in 03. Documentation
*The PDFs i want to hyperlink to are located in 02. PDFs
What i want to do
*i have 2000 rows of drawing names
*the drawing name in excel is spread over 5 side by side cells on each row (rows 21 - 2020) so for example the first row the information is in cells (H21, I21, J21, K21 ,L21)
*the cells i want to contain hyperlinks are V21 - V2020
so what i want is when excel opens up (i already have another script running at startup so i will be placing this after the other startup routine i have) i want it to search in folder 02. PDFs using the contents in (for example the first row (21) and colums HIJKL contain (H21)4CP(I21)-(J21)D(K21)-(L21)55000) each row and combine those cell contents to find the file name 4CP-D-55000.pdf. I then want it to go down every row until row 2020 untill it has added all pdfs.
(The second row is (H22)4CP(I221)-(J221)D(K221)-(L21)55001.....file name would be 4CP-D-55001.....third row would be 4CP-D-55002 etc...)
If such a pdf with that name doesnt exist, i want the cell (for example v21) to read "PDF not available"
based on a search here i have been able to do this for 1 cell, but dont want to do 2000 seperate routines. the current routine i have for it to work on one cell is
' Select PDF range
ActiveSheet.Range("u21").Select
' Promt PDF Hyperlinking
ActiveCell.Hyperlinks.Add ActiveCell, "I:DraftingAs Built4CP - PinkenbaE - ElectricallZircon Plant02. PDFs4CP-D-55000.pdf"
I also have multiple sheets. the first sheet is D - Documentation. I will eventually copy this routine 4 more times as i will be able to work out how to apply it to the other sheets
way to automatically hide a row or column based on a specified cell.
Or even something general like: Hide all rows with cells evaluating to #n/a.
I am trying to give a cell a unique ID based on the contents of 2 other cells.
Basically in cell A1 a value is entered between 1 and 13 and in cell A2 another value is entered between 1 and 4 to find the unique ID that matches these I need to look in DF4:FE4 to find the number that matches A1 ( there will be 4 matches) then look in thoses 4 matches in DF5:FE5 to find the match to A2 ( there will only be 1 match ) then return the id from the relvant cell in DF3:FE3.
I’m having some problems writing a macro,
I have a spreadsheet with 2 columns. The first column is the index number (unique identifier) of the second column’s data that will repeat itself as many rows as needed. Let me try to exemplify it:
Column A (index)Column B (text)
1 AAA
1 BBB
1 CCC
2 DDD
2 EEE
3 FFF
3 GGG
3 HHH
3 III
I’m trying to write a macro that will merge the text of each identifier in the first row it appears. The result I’m looking for is:
Column A (index)Column B (text)
1AAA
BBB
CCC
2DDD
EEE
3FFF
GGG
HHH
III
I already know how to make the merge, but I can’t get the logic to make it go through each row and merge the contents, since the number or rows for each identifier varies.
I am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
I am trying to combine the contents of two cells depending on the contents of another, I have tried to use the If function but am coming up stuck!
I have provided a link to the example file below:
[URL]
I have a column in my .XLS whose contents I want to change depending on what the contents of the cells of a different column are. However, I only want two cells from the same row to be dependent on each other. So, for example, if $A$1 reads "1" then $B$1 should read "apple" and if $A$2 reads "1" then $B$2 should read "apple"; if $A$12 reads "3" then $B$12 should read "pavement" etc.
View 11 Replies View RelatedI thought this was a pretty simple formula but I am having difficulty creating it. I am attaching a little test spreadsheet. Sheet 1 is where the data will be entered. The Reimbursed column has a drop down choice of yes or no. The next 2 columns are the cost of registration and the cost of accommodations. On sheet 2 is where I would like the formulas. So in cell A4 I would like a formula that says if B3 on sheet 1 is Yes populate this cell with the contents of Cell C3 only, B4 of sheet 2 would then be B3 if A3 on sheet 3 is Yes and so on with the Not reinbursed if sheet 1 the Reimbursed column is no.
View 3 Replies View RelatedHere's what we need to do:
We are compiling one master spreedsheet from many smaller ones and I need to figure out how to copy them quickly and efficiently. For example:
Small Spreadsheet:
Column B is marked as P, M, C or S. This represents the type of the account.
Column C is the name of the account.
Master Spreadsheet:
We have a column for each account type (P,M,C,S)
Can we use a formula/macro to automatically copy columns B and C from the small sheet and organize them accordingly in the Master Spreadsheet?
For example:
Small spreadsheet:
P Account Name1
M Account Name 2
M Account Name3
C Account Name4
M Account Name5
would appear in the Master Spreadsheet as:
P M C
Account Name1 Account Name2
Account Name1 Account Name3 Account Name4
Account Name1 Account Name5
I have data like in excel, which I uploaded and I need "simple" thing, If in column G is text Australia then copy from D column each cell which has "AUS1*" + copy the same number cell from C column and copy it into cell A and B. I hope I wrote it understandable
View 2 Replies View RelatedI'm not sure why this doesn't work on the dummy data?
Problems:It doesn't recognize the September 2011 datesIt is supposed to pull dates between July and August (i.e. 2 dates) and pull everything except those dates.
The date strings have to be variable based since it can't be hard coded.
Code:
Sub copyrow()
Dim rc As Integer, row As Integer, i As Integer
Dim mm As String, fdt As String, pdt As String, mo As String, yr As String
Dim Date1 As String, Date2 As String
mm = Month(Date) - 1
mo = Format(Now(), "mm") 'ex. "08"
yr = Format(Now(), "yyyy")
Date1 = mm & "/01/" & yr
Date2 = mo & "/01/" & yr
[code].....