I have a set of data in cells sequencially in every 3rd column. I would like to create a new rows where the data I have in columns are placed into rows in accordance with its catogory.
So all EUR are in one row sequencially over the colums and the same for USD & GBP. This way I can create a graph.
Jan 12EUR
USD
GBP
EUR
USD
[Code].....
I have a form made that needs to copy a value from another sheet. The Form is 10 rows 5 columns and and in format for easy print. On sheet2 I have a column where each row is filled with a name.
I need to put this name into sheet1, so in the the appropriate cell I put =Sheet2!B2 and it gives me the value (name) from the other sheet.
Then I want to copy the form bellow the 1st one so that I have the same form but with the next name, which means I want =Sheet2!B3 to appear when I copy, but since my form is 10 rows when I copy it the formula copies to =Sheet2!B12 instead of B3.
I need to make close to a thousand of this forms ready for printing and I would like to avoid having to manually set the formula for the next cell.
I need to put the order in the second column of the item that is in the first column.
In the last line item Computer is recorded for the third time.
MATERIALSSEQUENCEComputer1Computer2Mouse1Mouse2Computer3
I have 2 rows one with codes and another with numbers
At present I have , 11,12,13,14, and lines 13 have no code next to it then move 14 down to 13 and so on
Note there could be 2 numbers with no codes nest to it so the numbers may need to move down by 2
See attached file : numbers.xls
You will see about 10000 lines of which some have no codes next to them and these lines will be deleted .
I have in column AU cell 39 to cell 500 random sequences of 1-10 rows ,
with numbers in them, (as an result of formulas)
I need to count the number of rows in each sequence that have numbers
of 35 or less , but only up to the first number of 35 or higher. eg:-
AU result
row 39 32 3
40 14
41 19
42 107
43 11
44 21
45 #value!
46 40
47 45
48 16
49 15
50 #value!
51 29 2
52 11
53 146
54 14
55 17
56 11
57 #value!
and so on down to 500 rows
Add Worksheet Named As Cell. Number Sequence
how would I set it up so that it copies the page not just creating a blank page.
I'd like Excel to run a check to see if a row of numbers runs in sequence.
*As in row 4, the numbers dont have to incriment each time
*As in row 2, there may be gaps in the data
*As in row 6, the data cant increase and then decrease. Each subsequent number must be the same or high than the previous
*There could be varying amounts of numbers per row, hence the results being in column R
As an added bonus it'd be nice to see where an error occurs, but just knowing theres an error (column R) is the primary goal.
Basically I'm trying to look up a series of numbers against a separate row of numbers and look for a match regardless or number order.
For example
If you look at the above picture I'm trying to do a query of some sort that will look up the numbers in A8:G8 in then search each row in the above table ie look for the numbers in B1:J1, B2:J2,B3:J3 etc I need to be able to search each row and look for the sequence of numbers regardless of order, if there is or inst a match for all numbers it should look at the next row and so on (maybe multiple matches). If there is a match then it should display the Name located in column "A" into cell G8. In this example to Jarrad row contains the numbers located in A8:G8. If there is no match it should display "None".
I'm trying to find any easy way to do this as I have over 500 rows I'm trying to query. The number's in A8:G8 in this example could also be more or less, ie here I have included 6 numbers but this could be 3 or 9 etc.
there may even be an excel formula answer to it rather than a macro. Coloumn A has a series of numbers, I want column B to show those numbers in what would be there Descending Sequence.
Thus
Col A
100
97
14
87
32
108
21
So with this routine you would then see
COL ACOL B10029731478743251081216 The above I suspect is not too difficult, however if two (or more) numbers are the same I want the sequence to reflect that thus COL A COL B100297 314 797 332 5108 121 6 and no... the data - Col A - cannot be sorted, it must stay in that sequence.
If possible I would want this done automatically when any Col A value changes (any unused cells would be 0 by the way). Oh, there will in fact be 25 cells in column A for this.
I am trying to print a daily form for work. I want to include the day and date on each page, with the date changing for each copy. I would like to be able to input the start date, and then have each copy follow with sequential dates.
View 3 Replies View RelatedI'm use to highlighting two cells, find the plus, and copying a list of numbers down about 10 rows. Is there a macro instruction or VB instruction that will do the same?
Example,
Before:
G1010
G1011
After:
G1010
G1011
G1012
G1013
G1014
G1015
G1016
G1017
G1018
G1019
G1010
G1011
I thought I may of been able to get away with just using a simple macro which I could duplicate to copy all the cells in a column between 2 and 251 and
pasting them to another column on another sheet and it only referencing the available text within the first column, but it would appear to be referencing the
blank cells as well, which is creating errors for another function using this column.
So ideally I would like a macro to copy just the text data from a column within the range (F2:F251) on worksheet "Expansion".
All the cells have formulas in them which create a unique text string from other cells on the same sheet.
Not all the cells within the column will be populated with text strings at the same time, but the rows of text will always start at "F2"
and fill down without blank cells between the list of text strings.
The list of text strings will then be copied over to a different worksheet "AG-1" and pasted into column "A" starting at cell "A2".
This function is then repeated 14 more times for (G2:G251) through to (T2:T251) each pasted to different
worksheets "AG-2" through to "AG-15" respectively, in column "A" starting at "A2".
The first column to be found in the process with a blank cell in the starting row of that column, would deem the process complete. Otherwise continue the
process through to column "T".
I have 2 columns,
column A has a series of 8 digit numbers (some will match some will not) sorting in A-z order from lowest to highest value.
Column B is blank at the moment.
What I want
In column B i need to add numbers starting at 1 and moving down in sequence.
If more than one rows have the same number in column A they get the same numbe rin Column B
It's really a pain or have to hand type in the numbers and I can't figure out a easy way to do this.
Attached example.
Tab 1 = Origanl Data
Tab 2 = results i'm lookin for.
I am trying to fill a column with a number series starting with 1 whenever a value changes in the adjacent column. So for instance I am trying to do something like this :
87 1
87 2
87 3
88 1
88 2
88 3
88 4
89 1
89 2
90 1
91 2
92 1
92 2
92 3
92 4
92 5
92 6
I was wondering whether it was possible to search for a sequence of numbers.
For example, if this is down a column:
A1: 5
A2: 4
A3: 5
A4: 6
A5: 9
Is it possible to have a find function to search for the sequence of numbers "4 + 5" and consequently highlight cells A2 and A3?
Creating a sequence in every column? It should look like this:
Original matrix (Top left cell is "A1"):
40 50 60
30 10 20
70 20 0
And I want to replace it with:
2 3 3
1 1 2
3 2 1
I need to create an ascending sequence of numbers in every column. First column contains: 40, 30, 70. That's why its ascending sequence is: 2, 1, 3.
Btw, I got N rows and M columns.
I am stuck on what should be a simple formula. I have a spreadsheet that is sorted by "target" number in column A, basically 1,2,3,4. I am trying to create a formula that will increase the number in column B by one based on column A. So when the value in column A changes column B will reset to 1. Also I need this sequence number to be preceded by zeros up to 0999. So 1 would be 0001 and 895 would be 0895.
View 2 Replies View RelatedI am trying to group the same values in columns together and i was thinking about having a number count. What's the function that might be able to display this (display whats in Column B in the example below)?
Values
5000 1
5000 1
6000 2
7000 3
7000 3
8000 4
8000 4
8000 4
9000 8
10000 9
10000 9
I am looking for a better way to determine if a column of values contains a sequence of consecutive matches. For example, column A contains single words. To determine if three consecutive cells contain the word "neuron", I enter in cell B3 the formula:
=IF(AND(A3="neuron",A3=A2,A3=A1),1,"")
And copy down. I then test column B to see if there are any non-blank cells.
If we want to change the word or the number of consecutive occurrences, I have to re-edit all the formulas in column B. I want to eliminate the helper column. I would like to put the word in B1, the number of consecutive occurrences in B2 and have a formula in B3 that will return either True or False.
I can do this with a UDF, but the user has rejected this option.
the steps are below
===============
0. Row 1 to 9 in Sheet mv2f will copy into Sheet2 row 1 to 9.
1.Base on data in Sheet1, firstly macro will delete the same datain column A then it will start to search for 04022RP in Sheet mv2f.
2. macro will then copy 14 rows and paste into Sheet2 starting in row10.
3. then looping to 2nd data which is 04024RP T0.55 in Sheet mv2f and repeat the step above.
I've tried (and failed miserably!) to copy and then paste values from a COLUMN to a ROW using all sorts of code I'd picked up in the forum but all the code only works when copying and pasting values from ROWS to ROWS.
I have data in cell A1, A3, A5 to A13 on Sheet1 (notice blank cells inbetween) that I'd like to copy to to Cells A2 to M2 (A1 to M1 have headings) on Sheet2, then A3-M3 etc.
The cells on Sheet1 will always be the same, BUT each time I click the "Transfer Data" button, those values must be transferred to Sheet2 IN THE NEXT EMPTY ROW, please.
It is not necessary to skip the blank cells in the COLUMN Sheet1 - simply copy / paste them as empty on Sheet 2 and I'll hide the empty columns, i.e. B, D, etc. If it is easy to code this "skipping of blank cells" (thereby limiting the copying / pasting data in order to speed up the process), then that code would be great - I simply do not know what effect it would have.
The values thus copied will become my data sheet.
I have a worksheet where I collect ledger balances from 2 different sources and wish to identify out of balance situations. I have done so, but now I need to copy those rows indicated by a "No" to another worksheet (ideally I would like to have those rows printed out directly, but I can do that from another worksheet. I have tried AutoFilter and Sort, but that is not giving me what I want or expect. My question is: How do I code a macro to pull those "No" rows and either print them directly or copy to a new worksheet (WorkSheet2)?
View 2 Replies View RelatedI am looking for code to copy and paste a row into a new sheet based on the data in a particular column. I would like it to look at Sheet 1 Row D and if it finds the word Russell to copy the entire row and paste it into the Sheet entitled Russell
View 4 Replies View RelatedI'm looking to create a macro that copies a row of data and pastes it within a range when a condition is met. For Example, if A1 of the header Row matches A2 within a Range of A2:A100, I want to Copy the A1 Row and Paste Special Values over the Match in A2. Likewise if the match is contained in Row 100, I would like to Copy from A1 and Paste Special Values into A100.
View 2 Replies View RelatedIn column A I have Product Codes, They start at A3 and go down to A169.
I need to have a formula which i can drag across from CQ3 to DH3 which corresponds in the following manner.
CQ3 = A4
CR3 = A5
CS3 = A6
etc etc.
I then want to be able to copy the formula into another place, eg CQ20 = A21, CR20 = A22 etc
I have attached a screen shot.
Untitled-1000.jpg
I have a single sheet that lists available items, prices, etc. When doing quotes, you simply put y/n in Col:A for each item. I then want a simple macro that will copy all of the rows with "yes" into a second sheet. Sample data with end result attached.
I did try and butcher this macro to do what I want, and whilst it does copy data across, it's not really working. Firstly as I think it is searching along a row and copy columns, whereas I need to search a column and then copy rows.
[Code] .....
Attached File : sample_data.xls
I have these specific rows (2,3,4,6,43,44,45,63) which I would like to copy and paste it on a designated sheet. But my problem is, the column varies depending on the YEARS.
I do have codes for it, the one I got from the recording. I just do it for all of the rows (formula pasted here) until all of it copied on the summary sheet. However, when I finally finished it and I run it. I could see the movement form One Sheet to another and its not good.
A code that I could use for my better understanding of MACRO.
I have some specific procucts in coloum A in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
On Error GoTo Err_Execute
'Start search in row 1
LSearchRow = 1
[Code] ....
Err_Execute:
MsgBox "An error occurred."
End Sub
I have some specific procucts in coloum A(a2, a3, a4, till a50) in sheet (data), If that product was found in Sheets("allproducts"), copy all the rows and create a new sheet on the product name and save the excel.
[Code] .....
I copy rows of data according the Workgroup entries in Column C and paste them in to the relevant team sheet so that it is separated and printed off. Currently I am doing this manually, as the report length is variable and can be a few hundred rows or sometimes a few thousand which takes up some time. I know I can use the auto filter option, but as I currently use a macro to format this report I was hoping to include it whilst it is being formatted. Also would like to apply all borders to report so its easier to read when printed and a comments column at the end, but this can be done later.
There are teams and 27 workgroups to separate into each team, I have to do this everyday and was hoping to save some time here. I've attached a sample work book as an example.