I have a file that has various numbers of columns, some of which i need, some of which i do not. Under these columns, there are various rows, sometimes 50, sometimes 400. I need to write something that copies only the specific columns I need and pastes it into a new worksheet.
For example, in the data file there is are columns property type, loan balance current, and amortization type. I need them to be copied with the information in the rows below them to a new worksheet, to eliminate the unnecessary information in the data file.
I have an Excel 2003 spreadsheet with multiple sheets - one main one with all data and others which have only the data that falls into certain criteria. I'm wondering if there's a way to enter the information on the main sheet and have it automatically populate the correct "sub-worksheet" depending on what is entered in a specific column.
I'm not describing this well but I've attached a sample of what I mean.
I'm trying to "export" data from a static ws "order" (Sheet2) to a selected (active) worksheet. This will happen with 15 different (random) cells.
I got this far but the copying isn't happening from the correct sheet or going to the active sheet. The data in "G5" on "order" should go to the first unused row on the active sheet. What I got was backwards.
Once I get the first one to work I can finish the code for the other 14 cells. I appreciate getting pointed in the right direction
I have a workbook with multiple worksheets. Each worksheet corresponds to a certain store fixture estimate. Ont these sheets I have a specific cell where you can input how many fixtures of that type are to be used.
On that sheet also, is a range of cells (ex. Range("A65:F3340")) that needs to be copied to a new summations sheet of total hours to build the project.
If sheet 1 has 1 fixture - the macro should copy the range of cells only once. Sheet 2 has 4 fixtures - tha macro should copy the same range four times appending each set of data tot eh end of the previous, And so on for each fixture sheet.
I have 4 columns E,F,G,H which each column has the variant purchase cost, I need to sort between E,F,G,H and highlight which is the lowest cost on sheet 1, I then need sheet 2 to display any item that was the lowest figure from column E, then the same with sheet 3 for column F and so on to H.
What I am trying to do is to write a macro that will automatically copy six columns from worksheet (Sheet 1) to another worksheet (Sheet 2). i.e. ‘Description of Project’, ‘WBS Code’, ‘Rate’, ‘Employee Name’, ‘Premium’, ‘Invoice’, ‘Status’, ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ from Worksheet (from Sheet 1 to Sheet 2)
The problem arises as I know the names of the columns to be copied in Sheet 1 (as details above) but they can be in any order in sheet 1.
In additional the columns ‘Total Cumulative Hours’, ‘Total Cumulative Amount’ are total columns so when they are copied from ‘Sheet 1’ to ‘Sheet 2’ their values should be copied as opposed to the formulas
I have one worksheet from which i need to copy only few columns (Ex column A,B, D,G...need not be in sequence.....) to a new sheet.can you please help me to write a macro for this.In addition: Do we need to specify the number of rows in column or is there any way to get data till the end of column automatically.
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
I'm making a Excel list for trading cards (MTG) and I've divided it into different worksheets in order to sort it by the color of the cards (not really important I guess).
The issue I have is that I want it to copy certain columns (in this case C3:C1000, F3:F1000, G3:1000 ) from almost all of the worksheets into a new worksheet where it should paste them into column A, B and C.
In two of the worksheets it's also different (C3:C1000 , G3:G:1000, H3:H1000).
I've seen many where you copy one range from multiple worksheets, and that would've been okay I guess if not those two worksheets were different. I'd prefer not to change them, and I'd also prefer if I could've gotten just the information I needed also. Is this possible to do?
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data Column B: B2 of 'Source' Column C: B2 of 'Source' Column D: B1 of 'Source' Column E: row 6, relevant column column F: column K column G: row 5, relevant column column H: the specific amount
So basically I'm creating an entry for every amount in the table.
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I'm making a Task list with assignments for each of my team members. Columns A & B describes the ID number of the task, Column C describes the Task itself, Columns D to J are hidden, Column K describes the author of the task.
Column L is the one that have the name (or names) of the person who is in charge of doing that task. What I need to do is to create a macro that searches the name of that person in Column L and once it finds it it will create another sheet with the name of that person. And add to that sheet the entire row of his task..
I have a main worksheet with several categories in column A. I would like to set up an IF statement VBA macro, where by if cell "A2" = XYZ, then copy entire row 2 to worksheet XYZ; if cell "A3" = ABC, then copy entire row 3 to worksheet ABC, etc.
Macro written below gathers information from the source xls documents (which are located at "D:anetdata" ) and copy a new file ( located at "D:anet arih" ) according to different contents of two cells. Unfortunately macro copies solely Column A. But I want to copy entire rows between those cells. For example, if A400 contains "Days with most messages" and A500 contains "Subjects with most answers" , this macro copies cells between A401 and A499. But I want to copy entire rows between 401 and 499.
Sub EvrenYurdakuloglu() Dim DosyaDuzeni As Variant Dim GuncelSayfaAdi As String Dim Hucre As Range Dim ikinciAranan As String Dim ilkAranan As String Dim ilkDosya As Variant Dim ilkSatir As Long Dim islemAdedi As Long Dim i As Long Dim KlasorunYolu As Variant Dim KlasorYolundakiDosyalar As Variant..................
I am complete novice with VB so sorry for bothering with simple probably question: I need to copy cells (say column D) related to the cells with specific colorindex (say column B) into different sheet.
I have a output file that is collected time stamped data. How do I select the rows of the first time stamped collection. So, if the first row is stamp with 03-Jan-2009 23:59:00, I want to copy all the rows with that time stamp below the first row and stop when the time stamp starts at 03-Jan-2009 00:00:00. Attached is my sample sheet.
I have data on Sheet2 and would like to only copy all rows associated with column D2 to the Sheet3. For example Sheet2 has two different values Voice or Data I would like to copy all rows associated with column D that contains voice to Sheet3.
I want to link him on all the spreadsheets, but his cell location is always changing because new doctors are being added every year. Is there anyway to link the specialty column with his name so that whenever his name comes up on the other worksheets, the specialty will be automatically filled in with the correct specialty value? I want to be able to do that with all the doctors.
Also, I want to highlight certain doctors in all the seperate sheets, I have Excel 2007 on my home PC, but on my work PC I have Excel 2002. To do this in Excel 07 I would just conditionally format the workbook to highlight certain names, but I cant seem to find a way to do this in Excel 02.
I'm attempting to copy the contents of the first row in the "banking center" worksheet into the first rows of all the other worksheets in the workbook. Ideally, I'd like to select from A1 to the last column in row 1 to copy. Edit: Fixed a couple things but still having trouble with the copying section.