I have an Excel 2003 spreadsheet with multiple sheets - one main one with all data and others which have only the data that falls into certain criteria. I'm wondering if there's a way to enter the information on the main sheet and have it automatically populate the correct "sub-worksheet" depending on what is entered in a specific column.
I'm not describing this well but I've attached a sample of what I mean.
I have created one-dimensional array and now I try to copy the data from array to some specific Cells in worksheet. But it seems impossible all the time!
Sheet2.Cells(56, 3 + m) = LossLocationInt(m)
NB: LossLocationInt(m) is an array containing value in it. But, this doesn't copy to the Sheet2.Cells(56,3+m). For clearness: the array has type variant
I have a workbook with multiple worksheets. Each worksheet corresponds to a certain store fixture estimate. Ont these sheets I have a specific cell where you can input how many fixtures of that type are to be used.
On that sheet also, is a range of cells (ex. Range("A65:F3340")) that needs to be copied to a new summations sheet of total hours to build the project.
If sheet 1 has 1 fixture - the macro should copy the range of cells only once.
Sheet 2 has 4 fixtures - tha macro should copy the same range four times appending each set of data tot eh end of the previous, And so on for each fixture sheet.
Can a formula be created to link certain information to a specific cell.
In a workbook I have 10 worksheets that are have information in identical locations:names are English, Math, Science, VPA.......and so on.
I created another worksheet that prints out linked info from the worksheets: Eng, Math, Sci, VPA........
Current Print Worksheet called "Print" link to the "English" sheet
links in cells look like this
A1 - +English!B10
A2 - +English!B11
A3 - +English!C20.......................over 100 links
Can I have a formula in the link cell where I can type "Math" so all the cells change to links to another sheet.
So in B2 I type "Math" and the formula changes
A1 - +Math!B10
A2 - +Math!B11
A3 - +Math!C20
I have a file that has various numbers of columns, some of which i need, some of which i do not. Under these columns, there are various rows, sometimes 50, sometimes 400. I need to write something that copies only the specific columns I need and pastes it into a new worksheet.
For example, in the data file there is are columns property type, loan balance current, and amortization type. I need them to be copied with the information in the rows below them to a new worksheet, to eliminate the unnecessary information in the data file.
I'm trying to "export" data from a static ws "order" (Sheet2) to a selected (active) worksheet. This will happen with 15 different (random) cells.
I got this far but the copying isn't happening from the correct sheet or going to the active sheet. The data in "G5" on "order" should go to the first unused row on the active sheet. What I got was backwards.
Once I get the first one to work I can finish the code for the other 14 cells. I appreciate getting pointed in the right direction
How can I pull data from a specific cell from a closed worksheet in VBA?
Not sure but I think that Workbook("wb1.xls").Worksheet("Sheet1").Range("A2") only works if the worksheet is open.
I'm making a Task list with assignments for each of my team members. Columns A & B describes the ID number of the task, Column C describes the Task itself, Columns D to J are hidden, Column K describes the author of the task.
Column L is the one that have the name (or names) of the person who is in charge of doing that task. What I need to do is to create a macro that searches the name of that person in Column L and once it finds it it will create another sheet with the name of that person. And add to that sheet the entire row of his task..
I have data on Sheet2 and would like to only copy all rows associated with column D2 to the Sheet3. For example Sheet2 has two different values Voice or Data I would like to copy all rows associated with column D that contains voice to Sheet3.
View 4 Replies View RelatedI would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code:
Sub Results2()
' Results2 Macro
' copy table filter power by greater than and less than
Sheets("Finalizing Results 2").Select
Cells.Select
[Code] .......
Is it possible for a formula to copy all text after a specific value, to another cell. In this case, after a question mark.
I ask because i've been given 2000+ quiz questions with both question and answer in the 1 cell.
Does anyone know of a formula that will automatically copy a specific range of digits in a cell.
Example. I have a cell that contains 1125566348 98. Is there a function in that can copy the first 10 digits?
I have a worksheet named newvehicles with data in columns N to T. I have the branch names in column S.
I need VBA code that will copy all the branch names that are the same as well as their corresponding data i.e the data in columns N to T into a new worksheet with the same name as the branch being copied for eg if column S contains BR1, BR2, BR3, BR4, BR5 etc, then I need all the data for BR1, BR2 etc to be copied into a worksheet Br1, Br2 etc
The values are in columns P:R ("newvehicles"). I need these values to be added using VBA code as soon as this data has been copied accross. When pasted into the new worksheets, it can then be from the first column onwards
The format of the data shown in sheet below is divided by '|' where it represents a cell divider.
Sheet1
-------
A | B | C
ClassA | ClassB | ClassC
Sheet2
-------
A | B
ClassA | Student01
ClassA | Student02
ClassB | Student01
ClassC | Student02
ClassC | Student03
ClassC | Student04
Sheet3 - Final Output
-------
A | B | C
ClassA | ClassB | ClassC
Student01 | Student01 | Student02
Student02 | | Student03
| | Student04
Sheet3 = check if there is a match between Sheet1 and Sheet2, if there is, then use Sheet1 as a header (ClassA, ClassB, ClassC) and paste the matched data under the respective header.
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies View RelatedI have 2 worksheets that share some of the same data. However I do not want to have to populate the same information twice. Instead I want to be able to type the information required in the one worksheet and create an instruction for the data that overlaps with the second worksheet to automatically load. The catch is I need it to find the next blank row every time to add the data. EG
Worksheet 1 has columns: Name, ID Number, Date, Gender
Worksheet 2 has columns Name ID Number.
I want to be able to input data on worksheet 1 only and the the Name and ID number will be added to the relevant columns in worksheet 2.
I have a main spreadsheet that lists all the members and profile URLs for members in a forum. In Sheet 1, Column A is the username and Column B is their profile URL.
In sheet 2 I have a list of the members who are in listed in a particular category in the forum. However, I don't have the profile URL data. What I want to do is create a macro that look in Sheet 1 for the username and if profile URL is thier, copies that into sheet 2 next to the appropriate username.
I have a code that I intend to use to retrieve 2 ranges from an active workbook (csv) and place those ranges in another named workbook. Both files are open during this procedure. The code I have is:
Code:
Dim rngA As Range
Dim rngB As Range
With ActiveWorkbook.ActiveSheet
[Code].....
The problem is nothing is displaying in Workbooks("data recorder template UTD Nodata").Sheets(".") I think that the code is not picking up the active workbook correctly but not sure.
I want to write an excel macro for copying the data from one excel sheet to another. The data should be copied as:
- It should sort the data on column E.
- Then it should sort the data on the column N.
- Copy the resulting rows in the ‘Result’ worksheet.
http://www.excelforum.com/excel-programming/651452-copy-rows-of-data-into-a-different-format.html
Here is the problem:
I have a list of activities (each activity is one row of data). These will be input manually into Sheet2. (see attached file)
The activities then need to be automatically copied and pasted into Sheet1. However, the data is displayed in a different order than in sheet1. So I need some code which will run through a loop for each row of data and then copy and paste it into sheet1 until it reaches an empty row.
The cell positioning of each data set in sheet1 is equally spaced. VLOOKUP will not work for me here as I do not want any formulae or VBA script in sheet1. I cannot change the format of sheet1 as it is a company form.
I currently have a code that copies (when both workbooks are open) the status report tab from one workbook to another. So, my code copies the entire "Status" tab from Report.12102012.xlsx to Master_Report.xlsx.
But, there will continually be new Report.(DATE).xlsx files that are being made and I would like for my code to be able to search for the newest date "Report" spreadsheet, open it (so employee doesn't have to find the newest spreadsheet), and then copy the "Status" tab to my Master_Report.xlsx file.
All of the "Report.(DATE).xlsx" files will be stored in the same folder.
I have a workbook with multiple worksheets. Each worksheet is a set o data from a certain year. I want to create a macro that automatically copies the data from these worksheets into a master worksheet that can easily be used to make a pivot table.
View 3 Replies View RelatedI am currently trying to adapt the Macro I created that copies and pastes from one work sheet to another. I need to paste to the first empty cell in A column. See the code I have listed below.
Sub Button15_Click()
Selection. AutoFilter Field:=1, Criteria1:="<>"
Range("A2:E78").Select
Selection.Copy
Sheets("WorkSheet").Select
Range("A17").Select
ActiveSheet.Paste
Range("C17").Select
Application.CutCopyMode = False
Range("A1:E13").Sort Key1:=Range("A1"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Sheets("XH & HVYR").Select ..........
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab.
1,7 or 8 would go to the lockbox tab.
2 or 5 = IN-HOUSE
3 = WIRES
4 = DATA OCEAN
Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
I am using Excel 2003.
I have 2 worksheets.
Worksheet 1 is called "Master List Data". Every cell within this worksheet contains a formula so that it matches the cell value contained in a worksheet held within another workbook.
The formula for reference is as follows:
=IF('[CCL Breakdown.xls]MASTER LIST - Active Customers '!A1="","",'[WFX CCL Breakdown.xls]MASTER LIST - Active Customers '!A1) .
e.g.
If Cell A1 on Master List-Active Customer contains no data, Cell A1 in Master List Data would be blank.
If Cell A1 on Master List-Active Customer equals John Smith, Cell A1 in Master List Data would display John Smith.
There are currently non-blank values contained in cells A4:A750. But next week there may be non-blank values is cells A4:A790 (i.e. it will grow each week)
Worksheet 2 is called "Master List Flat. At the moment, I am manually copying and pasting the rows which have non-blank values in cells from Column A from Worksheet 1 into this report (e.g. A4:IV4).
I would like to automate this process and I have created a Macro, but I do not know how to word it so that it will only copy cells with actual data in.
The Macro I have written is below:
Sub IMPORTANDFLATTENDATA()
'
' IMPORTANDFLATTENDATA Macro
' Macro recorded 01/10/2012 by walesb
'
'
Application.ScreenUpdating = False
Sheets("Master List Flat").Select
Rows("4:759").Select
[Code]....
I have to input information into a master worksheet which contains data (employee names, location, start date and client) that then needs to be repeated in several other sheets. I want to input the data into a master worksheet and then automatically populate the other sheets with the data. If the data could then be filterable on each sheet that would be good.
View 9 Replies View RelatedI would like to link from worksheet A to worksheet B using the following scenario:
Worksheet A has the following cells, each of which is linked:
a
b
c
d
Worksheet B has the following cells which worksheet A is trying to link to:
a
b
c
d
The problem arises when I sort or add rows to worksheet B:
b
a
d
c
I want "a" in worksheet A to always find "a" in worksheet B, no matter where it is. The columns will not change but it will move to different rows.
I've got a "Title Sheet" in which our dispatcher can come in and enter date,workorder number , Location and an item description. I am needing help automating the process for them. I need the information entered into the Title Sheet to auto insert into an existing spreadsheet depending on what location is used.
View 9 Replies View RelatedI am looking for a macro which will take specific data from one sheet to the 2nd. I have attached the sheet. The Input data in the 1st sheet and the consolidated dat ain the 2nd one. Kindly assist. In the Final Sheet:
The Description column shld contain the data from B7:C7 and the B10:C10 together in one cell and that shld be copied till the end
The Description (Design steps) and Expected Result coulmn shld take data from the Test Step Description and Expected Result. And the Step Name shld be counted automatically till the last input. Test Name column shld be the 1st woksheet name.
I've been using this macro to pull data from multiple files, but instead of it creating a new tab, how can I have the macro pull the data and save it on a specific tab name(ex. Comp Stores). Here's the code I have currently.
Private Declare Function SetCurrentDirectoryA Lib _
"kernel32" (ByVal lpPathName As String) As Long
Sub ChDirNet(szPath As String)
SetCurrentDirectoryA szPath
End Sub
Sub Combine_Workbooks_Select_Files()
Dim MyPath As String
[code]....
