So I have a spreadsheet that has a Title in Cell A1, then entries in B1, D1, F1, H1, J1, etc... with empty cells between.
What I would like to do is copy those entries to the right, i.e. B1 into C1, D1 into E1, F1 into H1, but all the way along because in my master sheet there are a lot of columns.
I have 2 columns, the second column has some empty cells in the end of the column
What I would like to do is to fill in those empty cells but only as many as the filled-in cells in the first column
(I have already tried the specialcells(xlCellTypeBlanks) but that did not work as the empty cells are not always "blank" as well)
I've got 3 pairs of columns and I need to sort through them and align the cells in columns E&F with those in A&B and C&D. The cells I need to match up are the times (columns A, C and E)
Example - convert this:
A...............................B..........C...............................D.........E...............................F......
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:56.....6.14.....30/07/2014 14:22:56.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
Into this:
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.................................................30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11........................................................................................
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:56.....6.13
............................................30/07/2014 14:22:56.....6.14............................................
............................................30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
I don't know VBA so hopefully there's a way of doing this with a basic Excel function.
I have two sheets:
- sheet 1 ('current')
- sheet 2 ('31May')
The data in column C is the same, although sorted differently and can't be re-sorted to be the same. Where the data in column C is the same in both sheets, I want to fill columns A and B into sheet 1.
I have a long master list of registered members, column C has last name, column D has join date.
Now I have a short list of last names with join dates.
I want to compare the short list with the master list to find names that are already there, by comparing the last name and join date.
I have created a table that has working hours of staff members over many weeks. Week number as column headings (1 to 52) and staff name as Row headings. E.g a row may be
John Smith, 37, 37, 37, 37, 64 (commas to show seperate cells)
How would I go about using conditional formatting so that the formatting changes according to the sum of the values in each pair of cells?
I need to add the total hours of every two weeks for some staff and change the fill colour of both cells accordingly to highlight which weeks staff have worked too many/few hours.
So (B1+C1) would be a pair, the total would decide which fill colour is used on both B1 and C1, and then (D1+E1) would be the next pair and so on.
I have tried using 'a formula to determine which cells to format' and placing =(B1 + C1) = 74 and making it fill the cells green but this appears to be doing (B1+C1) as the first pair and then (C1+D1) as the second and changing the format for the first cell only.
We use a program at work to check items out to individual people but sometimes an item is missed and it takes forever to manually look for who it is. In the attached example, (keep in mind there might be more than 100 people on this list...this is just two people), the first 2 items are a pair (radio and radio case) and the second 2 items are a pair (laptop and laptop case).
Id like a way (condition formatting) to flag a person who has one item from the pair checked out and not the other. (Ive manually highlighted one person who only has one of the paired items...id like this to happen automatically)
EDIT:: If the first person were missing the radio in this example, his name would be highlighted on the line with the matching pair...cell D1 (radio case)
Other information:
Radios will always be RFAMRC***
Radio cases will always be RFAMF****
Laptops will always be RFAMTD***
Laptop cases will always be RFAMTE***
I am using a macro to copy a variable column of data from one file column A:4to another but what I want to do is copy the column apart from the last 2 cells. I am using:
View 2 Replies View RelatedIn column A, I have unit numbers. Column B is blank. I need help copying the unit number in Column A down in Column B until a new unit number appears in column A. For example, in A6 is unit LS2, A12 is unit LS24, A17 is unit LS34. I would like to be able to copy A6 into B6:B11, A12 into B12:B16, and A17 into B17:B22, etc.
I have the code to copy A6 in to B6 and down, but I don't know how to make it stop at A12. Attached is also an example.
I'm trying to copy cells from a column in one workbook to cells in a column in another workbook based on what's in a header column.
Such as
Original workbook
Mat Qty
A 1
C 3
D 2
E 4
G 5
Total 15
Target workbook becomes
Mat Qty -> Mat Qty
A -> A 1
B -> B
C -> C 3
D -> D 2
E -> E 4
F -> F
G -> G 5
My code so far (which might not be worth reading) is:
Code:
Sub CopyColumnToWorkbook()
Dim sourceColumn As Range, targetColumn As Range, sourceColumnValue As Range, targetColumnValue As Range
Dim mySourceCell As Range, myTargetCell As Range
[code].....
I'm getting a runtime error ('1004'. Application-defined or object-defined error) on the Copy statement within the If sttement.
I have a spreadsheet with temperature data, all in one column (D), that was recorded every 10 minutes for several months. In two adjacent columns (E & F), I would like to record the daily max and min temperatures. I can manually do this with MAX and MIN formulas in column E and F respectively, MAX(D1:D144). But when I copy this formula to the next row, I get MAX(D2:D145) when what I really want is MAX(D145:D288)....and so on...
View 1 Replies View RelatedThis is what I need:
Columns B, C, D & E are all populated with 3 digit numbers.
I would like column F to automatically populate with any of the 3 digit numbers that share two numbers, i.e.
F2 might look like this (using 00 as the pair):
001, 040
F3 might look like this (using 01 as the pair):
701, 051, 110, 001, 120
F4 might look like this (using 12 as the pair):
123, 721, 281, 912, 112, 120
etc...
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies View RelatedI am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
View 3 Replies View RelatedI wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I'm looking for an easy way to fill-in 1600 cells, in Col. "A", with pairs of sequential numbers [from 1 to 800] - for example:
1
1
2
2
3
3
4
4
5
5
6
6
I managed to achieve something close with: =INT(ROW()/2.05)+1 but this is not accurate enough.
I'm not sure if it's possible to do this, but I have three lists of data. One is a complete list (for example, the numbers 1-25).
The next list is a subset of the complete list (e.g., 1,3,5,7,9). Attached to these (the subset list) is another list (let's say letters, so A goes with 1, B goes with 3, etc). I want to physically move the paired entries from Lists 2 & 3 so that List 2 matches up with List
1. Let's see if I can represent this visually:
I have:
1|1|A
2|3|B
3|5|C
4|7|D
5|9|E
6|
7|
8|
...
25|
I want:
1|1|A
2|
3|3|B
4|
5|5|C
6|
7|7|D
8|
...
25|
I want to store a list of strings in an array with their position so that I can sort them alphabetically and then be able to put them back in their original order again e.g.
John 1
Charlie 2
Paul 3
Andy 4
etc,
So when they are alphabetized (is that a word?) they become
Andy 4
Charlie 2
John 1
Paul 3
My plan was to store them in an array, but I can't think how to do it. In python, I would just make a list of tuples, what is the best way to do this in VBA?
I need to complete what would seem a fairly simple incrementing task but I'm not getting the results that I'm looking for. I don't know much about macros so would prefer not having to use one but I'm willing to try if it's not too complicated.
I'm using Excel 2010 on a PC. For several projects, I need to increment cells that contain text and numbers. The column contains data in a cell (A1), followed by a blank cell (A2), then cell A3 contains new data followed by a blank in A4, etc. What I need to do is 1) copy the exact data in A1 to A2 and then 2) increment the number used in A1/A2 by 1 in A3, copy that into A4, and the pattern repeats down the column.
Here is an example of what I have in column A:
Test_01
[blank cell]
Test_02
[blank cell]
Test_03
[blank cell]
etc.
This is what I want as a result.
Test_01
Test_01
Test_02
Test_02
Test_03
Test_03
etc.
Do I need to save the data in the column as text, general, or numbers? Is there some function that would make incrementing the data possible as I've outlined above?
I would like to know if its possible to extract just the even/odd pairs from a number.
Exp. I have the number 123 in cell A1, and would like to extract the even/odd pair, which in this case would be 13, the cell A2. I would like to be able to do this without the use of "Isodd" or "iseven" functions.
Need formula? We have a pair of numbers in D1,E1,and F1…..
We want only the numbers that have 12 from column A and B
66 from column A and B
18 from column A and B only
A B C D E F
1
12 66 18
456 123
129 667 481
667 234
123 366 881 .........
I am looking for a code which will check and display the Maximum Occurrences of pairs of 2 Characters.
In the attached file I tried to write some code but it seems to be wrong.
For your convinience, I entered the reuslts in a table (hopefully not mistaken).
The code should display a MsgBox saying that "The pair 'ab' was found 6 times in A1.
The string, in A1, can be any string in any length.
I am trying to analyse a set of variables in my dataset.
The variables I have are numbers which are organised into a single column.
I want to count the number of times different variable pairings occur within my data.
An example dataset of mine is: 1,2,4,2,1,3,5,3,2,1
As the dataset contains 5 variables (1,2,3,4,5) the potential combinations are: 1,1; 1,2; 1,3; 2,1; etc.. with 25 in total.
I want Excel to move through this column starting with the first two cells and step down 1 cell each time and then tell me the number of times each of the combination occurs.
I am trying to figure out a function that creates currency pairs, for example EUR/USD etc based on a limitation.
I attach you a workbook with the details. The first step I have accomplished, I am having trouble to the second step as you will see in the sheet.
Test.xlsx
I am tring to list and count how many pairs in a 4 digit lottery?
no duplicates ...
I have a database with 6 columns in play (there are actually other columns but they are not relevant). I'll call the columns A through F. I would like to be able to match certain counterpart rows together, do a sort placing the counterpart rows adjacent to one another, and then count how many pairs I have. (Some rows will have no counterparts.)
Here is a micro-illustration of the database:
______A______B______C______D________E_____F
R1___01-03___54____959____nsneakr___24____yes
R2___01-04___67____454____adidaht____53____yes
R3___01-10___42____344____calb3wd___11____no
R4___01-19___67____454____adidaht____53____no
R5___01-25___54____959____nsneakr___24____yes
R6___02-02___54____959____nsneakr___24____no
R7___02-14___54____959____nsneakr___24____no
I basically need to devise a formula or script that pairs together two rows that fit the following criteria:
1) The rows are identical in Columns B, C, D, and E.
2) The rows are not identical in Column F (i.e., one half of the pair should have "yes" and the other half should have "no")
3) The rows are as close together as possible according to the date sequence in Column A. For example, Row 1 should pair with Row 6, and Row 5 should pair with Row 7. Row 1 should not pair with Row 7, and Row 5 should not pair with Row 6. **This criterion seems tricky because R5 and R6 would technically fit the requirement for pairing, were it not for the fact that R1 comes earlier in the sequence.**
I have a map with several waypoints and would like to find the distance between any of these two waypoints. Sounds simple, but I have having an issue with the later parts of the excel file. Let me explain further.
There are over 100 waypoints on this map we have. Each waypoint has an, seemingly arbitrary, X-coordinate and Y-Coordinate. However, if you divide the coordinates by [X], they turn into miles. It should go without saying that finding the distance between two waypoints is rather simple mathematically, but I having an issue figuring out how to pull two random waypoints and having the distance automatically calculated.
So far, I just have column A with the waypoint name and with column B and C having the X and Y coordinates respectively. Is there anyway I can create some sort of call function that when two waypoint values are entered it would automatically calculate the distances?
How do I express the following as a formula for range f2:h2:
case 1
if any number is equal to 0 or 5, then 1
if any number is equal to 1 or 6, then 2
if any number is equal to 2 or 7, then 3
if any number is equal to 3 or 8, then 4
if any number is equal to 4 or 9, then 5
example:
f2:h2=3,5,9
result
415
f2:h2=0,2,7
result
133
I need to pair up 20 people in sequence for a workshop, so I number the people and can rotate people numbered 1-10 with 11-20 easy enough, but when it gets to pairing 1-10 together in pairs and 11-20 in pairs.
Is there a formula I could use in Excel to work out the easiest pairing for me?
I have a string of n pairs and want to check various combination of that string.
Example: Pairs 58 78 15
Since I know I have 3 pairs (but it can be 2 or 4), I know the number of combination I want to test, ie 2 power 3 = 8 combinations. How can I program a code creating the various strings, ie 587815, 587851, 588715, 588751, 857815, 857851, 858715, 858751 ?
This is what I have so far (not much):
Public unique_pair 'number of pairs provided by another macro
Public mystring 'provided by another macro
Sub make_guess()
Dim number_of_combination, i
number_of_combination = 0
number_of_combination = 2 ^ unique_pair
For k = 1 To number_of_combination
'how to generate the various string ????
Next k
End Sub
