Copying Array Contents Into Cells. Gathering Data From Sheets And Compiling Into 1.
Aug 11, 2009
I've been given the task of automating a spreadsheet to assess whether work has been done by each employee. Every employee has their own spreadsheet, where column A is a job code, and column H contains either y or n dentoting whether they have completed the task (y) or not (n).
The main spreadsheet is designed to show any outstadning tasks across everybody so it has a list of everybodies names in column A and then any incomplete tasks will be listed from columns b onwards next to the appropriate person. Here is what I have done at the moment.
View 3 Replies
ADVERTISEMENT
Jul 19, 2014
Attached is a sample of a excel file I am using for tracking overtime.
On the sheet labeled tracking I want to gather data of the other sheets based on a date range.
All sheets other than the tracking sheet will be labeled in the date format mm-dd-yy.
On the tracking sheet in cells B2 & B3 will be the date range that I want to gather the data from.
There is 3 columns of data that I want to gather, "Balancing" "Approved" "Unknown".
I would like to return just a sum of these from the dated sheets M3:O42 based on the employee name A3:A42
View 3 Replies
View Related
Mar 7, 2007
I have created one-dimensional array and now I try to copy the data from array to some specific Cells in worksheet. But it seems impossible all the time!
Sheet2.Cells(56, 3 + m) = LossLocationInt(m)
NB: LossLocationInt(m) is an array containing value in it. But, this doesn't copy to the Sheet2.Cells(56,3+m). For clearness: the array has type variant
View 4 Replies
View Related
Jun 29, 2009
In the attached WB I managed to write some code (behind Sheet1) to change the Source table, itself, into the requested layout. My question is - could this be done by ONLY Worksheets functions - preferable without any helper column - if possible. note that all 4 columns data should be transported to the target table. The upper left cell of the target/new layout table can be put in cell G1 or in cell A15.
View 4 Replies
View Related
May 28, 2014
I am trying to program a macro that get the sheets in four different workbooks and put them into another workbook where my macro is located. I have managed to open the first workbook and copy the first sheet but when going for sheet two in the same workbook it gives me an error 91 stating the variable or with block variable not set on the following line:
[Code] ..........
Here is the rest of my code and attached file.
Attached File: Training Hours Macro.xlsm
View 5 Replies
View Related
May 29, 2014
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
View 14 Replies
View Related
Aug 10, 2006
I have several tabs in a spready, and I want to be able to compile a range of cells from each tab (constant selection of cells from each tab) together as a list in a new sheet.
The list needs to be able to be populated in any order and with repetition.
I'm thinking some sort of sheet for selecting which tabs to bring in info from would be useful, and then a command button to compile all the info into one list on a new tab...but I have no idea how to write the code for it!
View 3 Replies
View Related
Feb 22, 2013
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
View 4 Replies
View Related
Apr 21, 2009
I have a list of items in column A of Sheet1 and the same list in column A of Sheet2. Both list will contain the same items, however not necessarily in the same order.
What I want the book to do is; when I click on an item in the list on Sheet1, it takes me to the same item in Sheet2.
Is this possible with VBA?
View 10 Replies
View Related
Jul 29, 2009
I have a "Generate Table of Contents" button that launches a macro. This macro builds the Table of Contents, creates (3) columns (Patient Name, Date of Pickup, and Frequency), finds all of the sheets in the work book (already renamed to a patient's name), sorts them alphabetically, and lists them under the Patient Name column.
This code works great - The next challenge:
On each sheet (which corresponds to a patient in the database), there is a cell that is filled in that states which day the patient picks up their medication. There is another cell that designates how often they come to pick it up.
I am at a loss as to how to direct the macro to: For each sheet, go to the specific cell, and then report it in the table of contents.
It somehow needs to bind the information together... meaning the patient name, date of pickup, and frequency must be displayed correctly each and every time on the same row.
View 4 Replies
View Related
Feb 19, 2014
I need to add data from b2:b12,d2:d12,f2:12,h2:h12 and to show the totals in L2:L7
View 5 Replies
View Related
Aug 23, 2008
I have data as follows.
In the first column name of the month is specified.And in the third column of the same row day is specified.And followed by some data in rest of the columns and rows.
I need to copy the data from the presant sheet to a new sheet based on some conditions.
first need to search for the row where the word "MONTH" is there.if it is found then in the same row third column need to be checked for the day like "MONDAY" or "TUESDAY".If it is monday then need to copy 6*8 array of data i.e. (6 rows and 8 columns) into a sheet "MONDAY".if it is TUESDAY then 5*8 array data into a new sheet TUESDAY.And the search should be continued till the end of sheet.
View 9 Replies
View Related
Jan 15, 2010
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
View 9 Replies
View Related
Jan 15, 2010
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
View 6 Replies
View Related
Apr 3, 2009
I have a selection of data that lists sellout information for 45 different Cable networks. What I'm hoping to accomplish is to have (on a separate sheet) a function that will automatically pull out the top 10 networks based highest sellout percentages and list them in order from highest to lowest. I don't even know where to begin or if it is even possible to set up as an automatic function.
View 3 Replies
View Related
Jul 30, 2009
I'm creating an InputBox that pulls from various cells in my worksheet to create a sentence as the default value in the text-space. For example:
A1 = Policy Number
B1 = Credit Amount (i.e. $10)
C1 = $ Info [i.e. if credit is for one month (1 x 10), if two months (2 x 10)]
D1 = Date Policy Ended
E1 = Months Excluded from Bills
Thus, the sentence that the InputBox would display would be:
Today's Date + A1 + B1 + C1 + D1 + E1
Date - Policy # - Credit Amount - Info - Date Ended - Months Excluded
A text example would be:
30JUL2009 - 1234 - $10 - 1x10 - 01JUN2009 - Exc Jul,Aug09
The issue I'm having is how to have the InputBox macro ignore one of the cells if it's empty. My current code is:
View 6 Replies
View Related
Feb 28, 2014
i am trying to copy a data from another sheet, and i know to use "=sheetN!XM" but i have already renamed my other sheets, so i cant copy data from renamed cell using this command also by changing the command as the new sheet name...
View 3 Replies
View Related
Oct 14, 2008
i have 2 columns of data in multiple worksheets which i wish to copy into one column on another sheet.
i want to be able to click a button and have all the data compile with the item number and serial number into sheet "compile" no matter how many sheets i have (my current macro copys the sheets with a sheet prefix onto it, ive left 31 and 32 there) automatically. Ive edited compile with one sheet of data (note i just copied 31 to 32 - normally all data would be different, not a straight copy) to show what i am trying to achieve. the 17000 will stay the same no matter what, so i just used an IF function there. Basically the part im having issues understanding is how to copy data to the next blank space in the work book, as it wont always be full of data.
At the end of getting this part working i will set it up to automatically compile into a seperate work book as a csv comma delimited to upload to a database for stocktaking purposes - but i just want to get the basic copying working first.
View 9 Replies
View Related
Feb 20, 2009
I have two spreadsheets in the same workbook. Sheet1 contains statistics for teams and years. Sheet2 contains a listing of the teams in different orders.
How can I have excel copy a teams stats from Sheet1 to Sheet2 as it goes down the row? For example, A1 is atlanta 1996 so it copies a section of atlanta's 1996 stats to a specific range. Then A2 is detroit 2002 so it copies detroit's 2002 stats, and so on and so forth all the way down the list?
I am a beginner with VBA but I have experience with C/C++. I am just not sure of the functions for excel do all these things automatically and am having trouble finding applicable examples.
View 5 Replies
View Related
Apr 20, 2007
Given:
1.Four similar data worksheets (W1, W2, W3, W4).
2.Each worksheet has the same headings in row 1.
3.The data for each worksheet begins in column 2.
4.Each worksheet has an arbitrary different number of rows.
Problem:
What code allows you to automatically place the contents of all four data worksheets (W1, W2, W3, W4) into a different worksheet (w5) with only one common heading?
View 9 Replies
View Related
Dec 1, 2012
Im looking for a way to copy all rows with data in them from row 3 to the last row with data to another worksheet. I would like to copy the data from ALL worksheets in the workbook apart from one called Grade Boundaries.
All the sheets have the same layout. I simply want to produce a sheet with the data from all sheets in one place.
View 1 Replies
View Related
Sep 19, 2006
I have a mastersheet with all the information and I want to be able to copy it to new sheets.
The four different sheets I want are: Male-Olympic, Male-Sprint, Women-Olympic, Women-Sprint. Is there anyway to go through the sheet, copy the rows, and paste them into their proper sheet.
View 9 Replies
View Related
Dec 17, 2009
I have a what I believe to be a consistant formula on lines S12-S18 for gathering the sumproducts for dates on column O. Only problem is that the sumproduct formula is not working on line S18 correctly. I keep looking it over and I can't figure out why it is not returning the correct amount for that cell.
Here is the formula I am using:
=SUMPRODUCT((TEXT($O$12:$O$500,"dddd")=R18)*1)
Please see attached line S18 for the error I am getting.
View 9 Replies
View Related
Jan 3, 2014
I'm attempting to list my data... I have a dynamic table that has the following columns:
number of countries
country 1
country 2
country 3
1
Egypt
3
USA
Egypt
Scotland
2
Scotland
USA
As you may have guessed, I want trends on these countries. That would be easier to do if I had a single "Country" columns but I have to work that way.
I would have wanted to work with a pivottable (because they're so "user-friendly" (not always though^^)) but I didn't find a way to do it.
The reason why I want to work with a pivottable is to be able to link my countries results to the rest of the table.. If that's not possible, I'd still want to be able to reference them and say "USA, egypt and scotland pop up 2 times"
I found the following formula (in E2):
Code:
=INDEX(Table1[country 1]:Table1[country 3];MOD(ROWS(E$2:E2)-1;ROWS(Table1[country 1]:Table1[country 3]))+1;INT((ROWS(E$2:E2)-1)/ROWS(Table1[country 1]:Table1[country 3]]))+1)
Which works but I have to manually click-drag that cell down to complete my list. I'd rather have it grow automatically if I have to work that way.
View 1 Replies
View Related
Mar 25, 2014
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
View 8 Replies
View Related
Jul 16, 2009
If the name in Column F of "Sheet1" is found in "DataPEs" in Column B, then copy the block of 6 cells of data below it in column Q to column D of "Sheet1" in their relative rows. Additionally, if column Q has data then copy it, if not then copy the data only in column M. Finally, the number of matching names will vary in Sheet1 but will stay mostly the same in the DataPEs sheet. I've highlighted one block of data in green as an example.
View 13 Replies
View Related
Mar 8, 2006
I have 5 sheets in 1 wookbook with about 15 columns of varying rows of data. What I need to do is create a macro which collates all the rows of data, which with their own heading, onto 1 sheet so that it can be printed and distributed.
The problem is of course is that normal copy and paste won't work because the rows may vary and the macro need to take that into consideration. I guess probably an 'If not or' type command that would copy and paste the row so long as it had values then move onto the next sheet and continue from the last one.
View 9 Replies
View Related
Jun 23, 2014
Example.xlsx
I am wanting to have a sheet that I use for reporting based on another sheet in the workbook but I want to exclude items that are closed.
The first sheet will contain all rows of data with a status column of either Open, On Hold or Closed
In the second sheet I only want to have listed the items which are Open or On Hold, I want to ignore the closed items.
In the example enclosed, I only want rows 2,4,6 and 7, but NOT 3 and 5 due to status.
View 2 Replies
View Related
Feb 24, 2014
I have a workbook with two sheets the first one is called "SDL" contain master data for three TEAMS (TEAM.A, TEAM.B & TEAM.C") and the second worksheet is called "SDL_Calendar" for graphical chart view.
I need Macro to copy the relevant column data from "SDL" sheet and paste into appropriate column in "SDL_Calendar" sheet then make separate sheets for each "TEAM".
I have attached the work book of what I am trying to accomplish.
View 6 Replies
View Related
May 13, 2014
I have 3 different sheets with data that I want to combine into one sheet using a formula. Here is an example:
Sheet A
Date Amount
10/1 $5
10/2 $10
10/7 $5
Sheet B
Date Amount
10/2 $7
10/3 $10
Sheet C
Date Amount
10/5 $5
10/6 $10
I want a fourth sheet that fills with all the data from these three sheets. Ideally it would be in order by date, but I understand that might not be possible. So the last sheet should look like this:
Date Amount
10/1 $5
10/2 $10
10/2 $7
10/3 $10
10/5 $5
10/6 $10
10/7 $5
The reason I want to use a formula of some sort is because if I add more rows to sheet A for example, I want the fourth sheet to automatically add it (whether it's possible to do in date order or not).
View 2 Replies
View Related