In a MSquery on a ODBC source I am have a field in which there are several values in one (alfanumeric) field seperated by an alfa key.
Example:
A1 = &&&1000,80&&&500,35&&&11810 ABC&&&
The values between the &&& have to be copied into other cells so that I can use them for calculations
Example:
B1 = 1000,80
C1 = 500,35
D1 = 11810 ABC
Lotus 123 had a function where you could graphically, in a cell, show plus symbols(+) or negative symbols (-) for the value of the data. For example if you had a column of numbers that you calculated from the previous year that indicate the change, Lotus, in the next cell would allow you to graphically display the symbols that indicate the strength of the change. So if your result was a positive ten then ten plus symbols would be shown. If it was -20 then 20 negative symbols would be shown. Now the numbers I am looking at could be 600,00 and I believe there was a way to to proportion the symbols for example for every 100,000 put in one symbol so the result would be 6 (+) signs.
View 5 Replies View Relatedis there a way to use the "1/4" symbol as 0.25 in a calculation?
View 9 Replies View RelatedThis is my qns
cell A1 having <txt>NEWM</txt>
cell A2 having <txt>RSQ</txt>
I need to display NEWM in B1 and RSQ in B2....
I have a pair of workbooks in which one calculates a number of values and I want to store the values only in the other.
I would expect to be able to highlight the range of the calculated cells in the source workbook, Copy and then Paste Special | Values in the other.
Both the source and the target contain some merged cells. When I try to do the paste, it complains that "this operation requires the merged cells to be identically sized".
They are identically sized.
I have even done Paste Special | Column Widths to guarantee they are identically sized. It doesn't complain about the merged cells then; in fact, it doesn't complain about the merged cells with any of the other paste operations, only with Values.
I have been able to repeat the behaviour with a very simple example. See the two attached sheets. Try pasting Values only of the range $B$2:$D$4 from either one to the other.
When I first created the samples they worked. What seemed to triggered it is I changed one of the merged column widths by one pixel, tried expecting it to fail (and it did), changed that column width back again and it hasn't worked since. As I said, I even tried pasting the Column Width to the target, which it appeared to do successfully, but it hasn't helped.
Now, the attached examples are only to show the principle of the problem. They are very simple and there would be a myriad alternative work-arounds for them. In my original case though there are many formulae over a much larger range and I want other people to be able to paste values without having to follow complicated instructions, so I am not looking for work-arounds unless someone has a mind-numbingly simple one that my numb mind has overlooked.
The only other way of solving the problem that I can think of would be to write a macro that copies cell values individually, but I'd rather not do that because I know these people: they will get narky about having to enable macros. It will be "against organisation policy" or something.
Is there any way of resetting the target workbook so that it will receive the values from the source?
I need to delete cells that contain certain characters (symbols) and space. Say I have some columns/rows like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box Text Box Power Power Place Nice Nice.Plus Jump Jump Over High (Jump) Car Black Car Green.Car Car's Color Cars Blue Color Green Red (Color) Black White
And now I need to have cell without those contain symbols or space or character like -
Column 1 Column 2 Column 3 Column 4 Column 5 Text Box
Power
Nice
Jump
[Code]....
I have copied some data from a website. I need to plot these onto a histogram. (this I know). However, the values have a $ sign attached. Is there a way to remove a whole column of $ signs without having to do this one by one?
View 2 Replies View RelatedI have 4 columns (and a couple of other text columns) that are formatted as decimal with 6 dicimal points.
I need to create a text file with lines that are 80 bytes each from the spreadsheet - no spaces inbetween each of the characters.
The issue I am having is trying to format the 4 decimal point columns to be fixed numbers and retain the leading or trailing zeros to do a concatenation with the other columns.
Just an example of some what some of the values look like on my spreadsheet:
.123456 | .123450 | .012345 | .012340
Essentially when I'm all said and done, I would like the row to look like "text123456123450012345012340text"
I tried to format 4 new columns as general and use a "=right(cell,6)" and that worked pretty well for the cells that have leading zeros, but for the cells that have trailing zeros, it doesn't seem to pick up the zero. I tried to use a "=mid(cell,2,6)" but that didn't work either.
I am looking to remove numbers and symbols from a single cell.
For example, I start with something like:
Cell A1: M. Flank1, T.D. Chang1*, T. Person2, J. Doe3
Cell A2: T.R. Money1*, Y.R. You2
...
and I want:
Cell B1: M. Flank, T.D. Chang, T. Person, J. Doe
Cell B2: T.R. Money, Y.R. You
...
And, there are about 300 more, with varying number of people per cell.
I'm not great with Macros, so if there is a way without macros, that would be good, but, if a macro works best, I can give it a shot..
I'm having a column called "Body". Each cell in this column contains a huge amount of text. I want to select automatically certain values from that text and copy them into other cells. This image will explain what i mean:
I tried to work with the function MID but that doesn't work because the values don't have a fixed position. They don't start always at the same character number.
I am trying to make the cells Iam am copying paste hidden cells with all formats - seems to work fine other than the security part of them, Iam makeing a sheet for work and just trying to make it were it will not get destroyed by other users-
View 12 Replies View RelatedI wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I have these values in one column
706
706
706
512
512
12
12
12
12
In an another column I have same values and in the next column some more values that correspond to the previous values
12 red
512 blue
706 orange
I need a formula that can automatically copy those text values according to number values.
706 orange
706 orange
706 orange
512 blue
512 blue
12 red
12 red
12 red
12 red
I have tried =lookup and some variations of =if, but no good result so far.
I have a command button. When the user clicks it, it needs to dynamically refresh the data in Excel.
I have a SQL server running on the backend. I have been successful in establishing a connection between the Server and Excel and am able to query the data required for me.
FyweekProductRegionHandledAbandonTransferred
These are the columns in Excel. Now i need to start copying from SQL to these fields row by row till the end of the record set
I need VBA Code that will copy numerical values (including formulas) i.e excluding text in column J and to paste these as values in column F.
Basically what I need is to find a row (I'm doing it by matching the row title that is 'BALANCE'), then I need to find the max value in this row (the problem I'm having is that the row number is not constant), copy that value in another cell and copy the name, that is located in the same column, next to the previous copied value.
View 2 Replies View RelatedI'd like the following code to do is to go through each worksheet in the workbook and copy the value of the formula in cell S2 down the S column to the last row based off of a count of rows in column B. It's not working quite right and was hoping someone would be willing to correct it.
View 4 Replies View RelatedI have a file where I have few sheets (link to file below). Sheet zrzut is dropdown from other system - updated daily. Sheet Productivity is filled with data supporting to group data and add conditions (for example column "I" in "zrzut" sheet). Sheet "Vena" has data from "zrzut" based on condition in column "I". Sheet "VENA_PLAN" has the same data as "Vena" but only values - I need only values for other actions. The thing is my current code replaces old data with new, but what I would like to achieve is to have new data stored below old. For now code looks like
Code:
Sub PlanVENA()
Application.ScreenUpdating = False
Worksheets("VENA_PLAN").Range("A3:H300").Value =
[Code]....
I have a cell "A1" that changes values. Every time "A1" gets a new value I want to copy it the the cell below the last value in Column "B". Assume "B1" contains a column name.
I want to copy A1 to B2, then copy A2 to B3 when A1 gets a new value.
Then I want to copy A1 to B3 when A1 gets another new value and so on.
I have a "weekly"workbook that is link to 26 workbooks the weekly sheet updates percentages from the other workbooks. What i am tring to do is I have a range "S9:S35" that pulls the percentages from the other workbooks I need it to copy the value of that range to "T9:T35" only when promted too(msgbox) in both cases. So that way if a workbook gets opened it doesnt automaticlly update "s9:s35" and "t9:t35" does'nt update when weekly workbook gets opened.
View 9 Replies View RelatedI have a large list of data including subtotals. I want to copy and paste just the values of the subtotals to another worksheet. I have tried collapsing the list to Level 2 and copying/pasting values but this still carries over the whole list.
View 3 Replies View RelatedI have a Sheet in which the data is calculated by changing the Sheet reference and also by the period..
Now I need to transfer this data as values, however there are certail cells which are merged and therefore I get a prompt as I cannot paste as values using Paste Special-> Values..
I am using Excel 2007.
In cells A1 and B1 I have numerical values, e.g. 50 and 12 respectively. Cell C1 calculates the product A1*B1 (= 600). In another cell, say D1, I want to display a statement like “50 x 12 = 600” with the 50, 12, and 600 taken directly from cells A1, B1 and C1, without re-entering them. If I change the 50 to another value, say 70, then I want D1 to read “70 x 12 = 840”
I'm working on a project requiring the matching of data from multiple worksheets and got some useful advice from someone on here a few months ago to get it up and running.
At the moment I'm using SUMPRODUCT with an IF argument to check rows on one sheet for matches on 5 others and return a "Yes" or "No" value, which is working fine. The next bit of analysis however requires copying the value from another column on rows that match, and pasting it into the first sheet.
I have a sheet with a lot of different data. In column M in workbook "Maximo report" there are 5 different values. I want to copy the rows that contain CDC_HVAC and that have the value "INPRG" in column G to the sheet HVAC_INPRG. I want to do this for all 5 values. Once the rows are in their respective sheets I want to filter them based on a formula and then sort from oldest to newest. I dont want the file to be too big and I think that VBA is the way to do it. I am new to VBA
View 6 Replies View RelatedI am trying to copy a set of data (lets say workbook 1) into a new workbook(workbook 2). Both files are saved in the same directory.
Workbook 1 will be continually updated with new row additions and some changes in text in the rows. I want to copy these new changes (from workbook 1) without having to copy and paste the new additions into workbook 2, as it is wasting a lot of my time.
Is there a trick in excel to automatically do this?
I have the following macro which works fine accept for the fact that it copies the formulas from other worksheets, where as i only want to copy the values.
View 3 Replies View RelatedI have been searching through the forums for examples and haven't been able to find exactly what I am looking for.
Ok here is my issue. I need to compare the Conf # and line number on both sheet 1 and 2. So basically if the Conf # and the Line number match between page 1 and 2 then it copies the Conf #, Item Number(Sheet 1), and Detail(Sheet 2) to sheet 3 in a row. This needs to continue till the end of the Sheet 1. I have a pseudo report created with no code because I don't have a clue as to where to start.
I’m attempting to find values that are within a band of .001 of the values of cells in columns L through O and searching columns B through I for values that meet the .001 criteria and copying the values to columns Q, R, S, and T respectively.
I mentioned the values in L, M, N and O are where the comparisons will be made and these values are tagged to a specific date in Column K. I need to find the dates in Column A that are in between the values of K and the cell beneath it. For example, in K4 I have a date of 10/3/99 and the next date I have in K5 is 10/5/99. I would then query Column A for the dates 10/06/99 (A4), 10/07/99 (A5), and 10/08/99 (A6). The values I need to find within the .001 band are in Columns B through I (B4:I6). Lastly, when reach the last value in Column K, query all values in Column A greater than last value in K and copy the appropriate values in B through I to Q through T.
Rules for copying data to Column Q, R, S, and T:
For Column Q-
Find values in B, C, or D that’s within plus or minus .001 of M and copy the value of B, C, or D into Column Q of the same row.
For Column R-.................
I have a set of values on Sheet1. These 'original' values will never change.
I then have a set of values on Sheet2. The 'updated' values get updated every month.
On Sheet3 I want to show the updated values again, pretty much a copy of Sheet2, but where a value is higher than that on Sheet1 or lower than a value on Sheet1 I want to use conditional formatting to show this.
Is there a simple way to use conditional formatting in such a way? I have a long list of values so don't want to individually create a rule for each cell.