I need to count column E when it does not say "MTO" or if column G is blank. E.g. below would return me a value of 2. I would count row 1 and 3 only.
Column E Column G
10-Jan-14
MTO
06-Dec-13
18-Oct-1321-Oct-13
I have 2 columns - Column A and Column B. I want to count the number of
'YES' in column B ONLY when Column A is blank.............
I have a workbook that usually looks something like this
Category Product No description Price
Balloons 12345 Red Disney balloon .50
Balloons 12567 Blue Princess balloon .86
Balloons 76521 Angry Birds Balloon .80
Kites 23456 A Big red Kite .27
Kites 22222 A small blue kite .06
Banners 10000 Party banner .33
etc..
I need to find a way to copy the category below an empty row from column A and paste it in the blank row in column B . If possible to bolden the text but I could probably work that bit out myself. I'm new to this but have used VBA before to run macros.
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
I am trying to count the distinct times a value shows up in a column, if another column has a 2 in it.
For example:
Columns
A, B
2,P25
2,P25
3,P5
3,P6
2,P5
The results shoud be: (2) Because I only want to count the P25 one time.
I'm using Excel 2010
I have two columns. Column A had numbers and column B has names. I need a count from column A for each name in column B.
View 1 Replies View RelatedI think I am working all around this in Excel 2003 and feel like I am in the neighborhood, but can't seem to quite get there. On sheet1 I have 2 columns of 100s of rows. All of the cells in column A will be filled in with a date as time goes by (1-May-09 for example). Several of them may be 1-May-09 as a matter of fact. In column B, some of the cells will have a number in them and some of them will be empty. On sheet2, I want to construct a formula that returns a count of cells in column B that have a number in them based on a specific date in column A. For example:
AB
1-May
1-May777
1-May
1-May
1-May
2-May999
3-May
2-May
1-May
2-May111
1-May
If I could get the formula right, it would return an answer of 1 for 1-May in the example, because only 1 of the 1-May entries in column A has a number in the adjacent cell in column B. A formula for 2-May would return an answer of 2 since only 2 of the 2-May entries in column A have numbers in the adjacent cell in column B, and so on for the month. If I understand things right, there are too many arguments for COUNTIF. It seems that SUMPRODUCT should work, but I can't make it so.
I have a column that repeats it self and I want to perform a count on Column B, based on the values in Column A.
Example attached : Book2.xlsx
I am wanting to count the number of records (excluding cells with no value) based on criteria in a corrosponding column. In column "AS" I have a number of records that are not sorted showing values "7", "13" and "2".
In column "AL" there are values attached to some of these records based on certain IF statement conditions. I am wanting to count and sum the number of records in column "AL" that meet the conditions of "7" in column "AS" and so forth.
I was curious if it is possible to give a single cell multiple number formats based on what the number is in the cell. So for example if my number is bigger than 1000, I would like to use comas so that it looks like this 1,000. However, if it is less than 1000 I would like it to look more like this 999.00.
View 6 Replies View RelatedI'm using this formula to count the number of times this statement is in Column "D"
View 4 Replies View RelatedI am creating a chart and want to get a count of only the blank cells in Column D only if there is information contained in Column A (same row). I am using Excel 2003.
View 2 Replies View RelatedCan i get a simple formula to count a number of blank cell in a column ?.
View 9 Replies View RelatedI have a spreadsheet that has 36 columns and 6000+ rows. Each column has a mix of blanks and content, which is an X. See example of the pattern below, column A. I want to run the COUNTBLANK function through the entire column A so that it assigns a value in column B, next to the content it relates to. Line B4, B9, and B11 would have results, in the example below. I want to be able to apply a formula the entire worksheet, all 36 content columns, and over 6000 rows, so that I can obtain the results quickly by filling down, across, etc. I suspect a loop might be in order. Currently, I have to run the COUNTBLANK between one X and another, repeating that tediously over and over again.
---A----------------------------B
1 X
2 blank
3 blank
[Code]....
I need to count the number of non blank cells in a column and add a text string to the result to show, for example, "75 Clubs" as the result. I have tried "=Count(A1:A90) + Clubs" but this does not work.
View 2 Replies View RelatedI am using the following to count my blank rows.
=COUNTIF(report!N2:N303,"")
Using a formula, rather than VBA, how can I modify this formula to accomodate a variable ending range. Without thinking I initially just counted the blanks in column N - yes there were lots of blanks. My goal is for the end user to not have to modify the formula.
I have the following formula in H2
=COUNTA(report!B:B)-1
which would give me the number of rows used for the month. I tried referencing the countif to cell H2 but, as of yet, have not been successful.
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I am trying to count the number of times a code appears in column N, IF the corresponding cell on column T is blank. Column T either has a date or is blank and column N has a 4 letter code.
This is what i have been trying.
=SUMPRODUCT((CMRF!T:T=ISBLANK)*(CMRF!N:N="B2"))
I want the code in column N to match to the code currently in cell B2, i have also tried using "" instead of ISBLANK but i get # NUM! error as a result either way. the result should just be a number i.e. 400 (cells with the same code as B2 and no date in cell T)
I have a spreadsheet that contains given answers to a multiple choice test. I want to count the number of times each possible answer has been chosen at the bottom of the column. I have tried to use COUNTIF and that works fine to give me the number times each answer has been chosen but there is just one annoying thing. If the given answer hasn't been chosed by anyone, a "0" is automatically entered into the cell. This tends to really clutter up the spreadsheet and I would prefer for the cell to be left blank if the answer hasn't been chosen by anyone.
The closest I can come up with is: {=IF(D1:D10="","",COUNTIF(D1:D10,"A"))} but unless the answer "A" is chosed in D1, the cell remains blank.
If "A" is chosed in D1, then the formula works and counts all the rest of the cells that have "A" as an answer.
What I'd like to do is; If column C contains data then insert a blank column and shift column C to the right.
View 4 Replies View Relatedformula that would count the instances in Column C, where Column A contains "LH" or "RH" as part of the word, and column B equals "Either".
View 5 Replies View RelatedFor column "B" count all the 1's if column header is equal to name in column A.
For Column "C" needs to be checked if a value was filled in column "I" if yes then check if in column "L" has a value, count all these values.
I'm having to re-learn formula commands in order to continue to use my spreadsheets (I had tried to get the Quattro Pro converter to work in Excel 2003 with no success). Actually, I would have stayed with QP since I find it much more user friendly, but with Excel being the standard spreadsheet that most people use, I figured I better get used to it. Anyway, I'm currently trying to find out how I might get the same text that shows up in varying cells in an otherwise blank column (other cells contain formulas, but no text) to also show up in another fixed cell (which can be where I put this formula).
View 2 Replies View RelatedHere I come with yet another question in excel, how do I count/sum text in a column. E.g
Column B
Fish
Eggs
Meat
Fish
Fish
Chicken
this would basically be # Fish 3, # Eggs 1, # Meat 1, and # Chicken 1. Hope I make it clear,
I have this sheet(sheet2) with some data , I have 2 macro, my problems at this time is that I am looking for macro that delete only the blank rows that under the rows with {SELECT ....} and the under the blank rows with {CELL-ENTER......} and all the rest blank leave in place , I am also looking for option to integrate the new macro with the existing one and come up with one macro that I can refer to click button , in case that it is unfeasible , it's ok with me , I just will call the other macro at the from the first macro that I have.
View 4 Replies View RelatedI have the following data:
Excel 2010ABCDEF2Subset 13datadatadatadatadata54datadatadatadatadata65Subset 26datadatadatadatadata47datadatadatadatadata48Subset 39datadatadatadatadata410datadatadatadatadata411datadatadatadatadata412datadatadatadatadata4Sheet1
I would like to count up from the last row and color row with blank cells in column F light blue, but only through Column F. THe result would look something like this:
Excel 2010ABCDEF2Subset 13datadatadatadatadata54datadatadatadatadata65Subset 26datadatadatadatadata47datadatadatadatadata48Subset 39datadatadatadatadata410datadatadatadatadata411datadatadatadatadata412datadatadatadatadata4Sheet1
What I have is a sheet where the cells in range A9:A3508 have a formula that evaluates to blank if any of a variety of conditions are not met (date falls outside desired range, does not meet filter criteria, etc.) and a number if these conditions are met. What I am looking for is for all rows in that range where A is blank to be hidden (not deleted), and for this to automatically update every time A changes (meaning that if A goes from blank to a number, that I will need that row to become unhidden again). I have considered just recording the macro and calling the function with a button, but as this is for external users, some of whom may be unfamiliar with Excel, I would rather keep it as clean, simple, and automatic as possible.
View 5 Replies View Relatedhow to count how many times a word or text is displayed in a column.
Say this is Column A Can any formula be used to tell me that T1409 was duplicated 3 times and T1527 was used 2 times. The rest of the numbers only triggered once so I dont care for those numbers. I only want T1409 and T1527 to pop up and tell me how many times it was used.
StoreT1409T1409T1527T1527T1360T2463T1547T0164T1976T2482T1409T2760T1507T0224T2458T0201T2398
I have a worksheet where
Column D lists a service offered by a business, such as IMC, TC, Respite, etc
Column M lists how long the customer has used this service for in weeks, such as 4,5,3.5,6 etc
What I would like to do in another column is to count the number of clients who have used the service for 6 weeks or more broken down by the service type i.e. Count how many people have used IMC for 6 weeks or more.
If possible I would also like to be able to count those who have used a service for between 5.1. and 5.9 weeks too, again by service i.e. Count how many people have used IMC for between 5.1. and 5.9 weeks.
I have a spreadsheet with three columns (A,B,C). I want the third column C to be column A - B (A minus B) for each row, but only if there is a value in column B.
If there is no value in column B, then I want that row in Column C to just stay blank.