I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.
What formula should i use for this?
I was experimenting with:
=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")
But both don't seem to work.
I require a Formula to calculate the INTERVALS (the number of Rows between
the LAST instance and the PREVIOUS instance in a column) between each
individual occurrence of any designated PAIR of Numeric values (single-digit
/ double-digit) in the same Row of the Named Range "Results" and return each
calculated INTERVAL result to a separate Column on the same Row of a New
Sheet - starting with the most recent ( the LAST) occurrence.
For instance, each time 80 and 87 appear together in the same Row, return the
INTERVAL by calculating the number of Rows between the LAST instance and the
PREVIOUS instance in a column - locate when both Numeric values LAST appeared
together and Count back to their PREVIOUS appearance together to get the
required Count; i.e. count from the Row ABOVE LAST appearance to the Row
BEFORE PREVIOUS appearance.
The results are returned to a chart / matrix layout: I have the criterion
vertically and horizontally and they are referenced using the horizontal and
vertical cell address that houses each criterion, and the results are
returned across the Row of the intercept of the vertical and horizontal
criterion. At some point both criterion values being referenced will be the
same, can the Formula return empty text "" when this occurs?
Example Chart / Matrix Layout:
Cell Ref. A2 and B1 criterion 80 and 80
Cell Ref. A3 and B1 criterion 81 and 80
Cell Ref. A4 and B1 criterion 82 and 80
Criteria B1 houses 80
A2 houses 80
A3 houses 81
A4 houses 82
A5 houses 83
I am trying to total the number of cells in a column that are 0 or greater but less than 365. I use countif for for a specific digit but cannot compute a conditional range using it. I need to count the number of positive digits btwn 0 and 365. The column is a computation of the difference btwn today and past and future dates. A plus digit means we missed sevice and better be ready for an angry customer.
View 3 Replies View RelatedI have several cells that are either positive or negative values and the values are expressed in percentages. I'd like to know how many of the cells are over/under certain percentages. For instance, how many of the cells are over negative or positive 2%? I've tried the COUNTIF function using 2%, 4% and so on, but I always get back the same cell count regardless of the criteria I use.
View 7 Replies View RelatedI have few column values to count. I don't want the hidden column value. In that formula the hidden value also counted. How to ignore that hidden column value count, using macro/formula.
eg:
col A - col B - col C - col D - col E - col F
Task -- ok1 -- ok2 -- no1 --- ok3 -- ok4
Col D should be hidden. Final count result should be: OK = 4; No=0
I am trying to create a macro that determines if a range I am selecting has any non-numeric fields. If it finds say an cell beginning with a letter a message box appears letting the user know and possibly give the cell and value it found.
View 7 Replies View RelatedI have around thirty columns I manually search using AutoFilter to find values outside certain ranges. The ranges are different for every column and I copy/paste the out of range values onto another sheet. I am wanting a marco to do this for me.
Here is what I have worked up so far. I thought Select Case would be the easiest to adapt for each column by just changing the values.
Sub ColumnCase()
Sheets("10AL3-27").Select
Range("K1").Select
Selection.Copy
Sheets.Add After:=Sheets(Sheets.Count)
NextRow = Range("A65536").End(xlUp).Row + 1
Range("A" & NextRow).Select
ActiveSheet.Paste
Column K is the first of the columns I sort. The code above seems to be trying to paste the entire column rather than only the cells with values outside the range.
What would be the best way to select the cells which are out of the particular range?
I am trying to figure out a formula that will allow me to compare the
contents of cells within a range and let me know if there is a value that is
not the same as the others. For example:
Columns a,b,c,d,e and f and say "Joe"- this result is acceptable
Columns a,b & c all say "joe" and d,e,&f all say "Mary"- this result is
unacceptable
I want a formula or function that will tell me this wihout me having to
visually scan the data to determine this.
I want to delete all the rows with values between -1 and 1 in column 'I'. I currently set up a macro to do the formatting and conditional stuff that highlights all values above 1 and below -1 - these are the values I need to conduct my analysis on, but I can't figure out how to delete the rows in between. The worksheet has approximately 5,000 rows (and growing) and this would help me clean up the data significantly.
View 7 Replies View RelatedI'm trying to figure out how to count by two criteria, only one of the criteria has a value among multiple values in a cell and the other is a range. I tried to use sum but it doesn't count the value and count doesn't recognize the range. I attached the file so you can see what we're trying to do.
View 4 Replies View Relatedhow to convert number into text (acutal formating)
Eg. : 150500
One Lac Fifty Thousand Five Hundred
I need a formula to add just the time to ' date and time', ignoring weekends.
eg:
Fri 24-Aug-07 10:52 is the date and time
28:48:00 is the time
If I add the time to 'date and time', result is coming as Sat 25-Aug-07 15:40
But it should come as Mon 27-Aug-07 15:40 (hence ignoring weekend)
I am finding many posting on this topic with unique numeric values and have not come across one in regards to a text value. The essence of the formula is looking through a list for unique email addresses and now I need to up it to a date range and eventually a store # range
I am using the following array formula to establish an overall count:
=SUM(IF(FREQUENCY(IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""), IF(LEN('[Data - Deliverables.xlsb]orders'!A2:A5000)>0,MATCH('[Data - Deliverables.xlsb]orders'!A2:A5000,'[Data - Deliverables.xlsb]orders'!A2:A5000,0),""))>0,1))
Ctrl+Shift+Enter
The date column is E:E.
The store number column is G:G
I have the following issue:
=AR85*36*75*6.29
The above formula does not return any value and it simply appears as it is keyed. Cell AR85 has 5. I know it is something to with this cell, but I cannot fix it. In fact the whole Column AR has these values downloaded. I tried "text to columns" but it still doesn't work.
I have cell E15 in Sheet1 which will take an 8 digit Personnel Number, which can have leading 0's. I want to prevent a user from entering any characters other than 0123456789. I have worked out that I need to use the Worksheet_Change event and I need to use the function IsNumeric.
No matter what I do I can't trigger the Worksheet_Change event!
Refer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG
I use the formula below to sum hours in a spreadsheet:
=((((SUM(B6:AP6)+(COUNTIF(B6:AP6,"x")*12.5))+(COUNTIF(B6:AP6,"d")*12.5))+(COUNTIF(B6:AP6,"m")*12.5)) +(COUNTIF(B6:AP6,"e")*6))
I would like to be able to change the range from "B6:AP6" to something which will start with B6 but only count every 6th cell up to AP 6. I could probably place a symbol at the top of each column I wish to count if needed. If I try to simply choose every sixth cell I get an error about too many arguments for the countif function The above formula is used to add hours for various shifts (symbolized by letters). For my current need I do not need the multiplier i just need to count how many of each letter appear in every sixth cell of a row.
This may be too fancy but if one formula would work to count every 6th cell starting with B6 and give me a sum , then automatically do the same starting with B7 and count every 6th cell etc...that would be great. I am trying to sum the number of each occurrences of each shift at each of 6 locations.
how I would get Excel to count within time ranges?
For example:
car1 arrival/departure: 9:02 / 9:06
car2 arrival/departure: 9:02 / 9:04
car3 arrival/departure: 9:02 / 9:12
I want to be able to see how many cars are present during 5-minute intervals, so my results should be:
9:00-9:05 : 3
9:05-9:10 : 2
9:10-9:15 : 1
For small data sets I would do this manually.
I saw another thread using VBA, but I don't know how to edit that
I have several numeric values in one cell enetered using the alt return method, can these values be recognised as individual entries and therefore when the cell is formatted as $ it is applied on all entries?
View 2 Replies View RelatedI want to figure a class average for a test, but I have students that have moved. My Excel is automatically counting them as a zero. How can I program/tell Excel to skip any blanks rather than count them in the average?
View 9 Replies View RelatedI am working on a Productivity Log and can't figure out a way to count unique values, and also average the time per assignment.
Assignment with the action code A - should take 2 hrs to complete, all other action codes should take 20 minutes.
I need to show how many of each action codes were done for the day, and what was the average time taken to complete each. Even better, how much for A action codes, and how much for all other.
I need to count the number of records having hospital admissions within one year prior to the index admission. The list of all admissions is in one worksheet, the index admission in another worksheet. They can be matched on ID number.
View 3 Replies View RelatedI have a spreadsheet that has (amongst other things) 2 charts based on dynamic data with ranges that redraw using vb... The charts will draw envelopes that correspond to an aircraft's moment or c of g envelope - there will typically be 2 envelopes drawn, "normal" and "utility" or "aerobatic".
Plotted on the charts are an aircraft's takeoff and landing weights and moment/C of G.
I'd like to be able to use a formula or VB to determine which envelope takeoff/landing information falls in (or if it falls outside all envelopes). This data would then be used to generate an error message/possibly also in conditional formatting, etc.
This code counts all cells with a value from column B1:B:10, C1:C10, D1:D10, E1:E10, F1:F10, G1:G10 and H1:H10. And then give the cells of the 3 lowest outcomes a blue backcolor. The problem is that the code also colors any duplicate outcomes. How can I let the code skip any following duplicate outcome(s)?
View 2 Replies View RelatedI need a sumproduct to count response times in between 1-2 hours. The response times are calculated from an 'initial referral date and time' and a 'actual response date and time' (the difference between refererral and response time be across several days) and are in the format below:
Time between intital and contact
00:22:37
00:00:01
00:08:46
I have tried several different formula, but I can't get excel to recognise the time range I need. Its just the bit in red i need sorted.
=SUMPRODUCT((MONTH(Referral!$H$2:$H$1048576)=4)*(Referral!$E$2:$E$1048576="Initial")*(Referral!J2:J1048576>1)*(Referral!J2:J1048576
how I can change the color of an autoshape based on a value in a cell?
View 4 Replies View RelatedI am trying to compile a count of dates using a numerical reference which adds x consecutive dates onto the initial start date based on the number in a cell.The dates added cannot fall on a weekend.
The start date for each calculation begins in D4 with the corresponding number of days to add onto this date in K4. In the example below 8/11/2007 -- 2 means that the 8th and 9th of Nov get one added to their count. As the next row also has 9th Nov as a start date one more is added to 9th Nov. As the 10th and 11th were a weekend they are skipped and the count starts again from the next Monday. I have enclosed a simplified worksheet with some sample data.
Example:
D4 --------- K4
8/11/2007 -- 2
9/11/2007 -- 3
Expected output:
AE4---------AF4
8/11/2007 -- 1
9/11/2007 -- 2
12/11/2007 --1
13/11/2007 --1
I am trying to do is extract the volume size of products in 'ml'
from 10k plus products from a description field cell.
this description field could also contain the weight of the product in grams
so I cannot just do a search for a numeric string ,
it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
figuring out a formula to count the number of occurrences within a date range (the month of October) however, the date column is formatted to mm/d/yy 00:11:22 PM/AM.
I tried using =COUNTIFS(B4:B96,G3:G9611/1/2008) but got an error.
This is what I'm working with (there are other occurrences for Nov and Dec in the spreadsheet - this image only shows Oct)
Site Statistics
October-December 2008
Visitor
No.
IP
Address
Operating
System
Browser
Site
[code]....
I am trying to count different values in a range of cells. I tried a countif function and it worked kind of. Here's what i have.
Column B2 has values j3265,j4463,k5532,y2235,k2334....
I want to count all the J's, K's, and Y's separately.... >=4000 and how many
