I'm trying to Rank a list and than re-rank the list while excluding certain (or by Criteria) items
Vendor Co
Cost Fee
Rank
Vertox
500
4
BV
1520
3
[code].....
I need to have excel dynamically rank items based on two criteria’s (category and sales).
For Example:
I have a list of items with its category in column A, column B has the sales information. I need to rank the items by category and sales, the data is not sorted and I cannot use a macros/VB.
How do I list selected data by order of appearance in a list?
Suppose I have a named range somewhere in my workbook called "TeamsRanked".
This range contains hundreds of names. The data associated with each of these names appears in a table in the workbook in rank order. The teams are ranked in descending order according to points scored. This means that the ROW() for the HIGHER-Ranked teams will be LOWER than the ROW() for the LOWER-Ranked teams. Also, this named range is constantly being resorted as updated data is introduced.
Now...Suppose I want to monitor just a few of the names??
For example: Cells A1:A3 on a separate worksheet contain the names of the teams I want to monitor.
What formula do I need in Cell A5 to return the HIGHEST ranked of the teams in Cells A1:A3??
...in Cell A6, to return the next highest ranked.
...in Cell A7, to return the LOWEST ranked.
I tried some IF(ROW(MATCH...)) ---"is less than" ---IF(ROW(MATCH...)) formulas...and I keep getting INVALIDs in my formula palette.
I'd like to have a dynamic report that ranks my lists based on an autofiltered list. In other words, I'd like to toggle the criteria that qualifies the lists content, and have excel generate "ranks" based on the values returned. Currently the rankings are based on the overall list, includeing the records that are filtered out.
View 4 Replies View RelatedI'm trying to come up with a formula that assigns ranks to an ascending list of integer values where ties are resolved by assigning tied values the mean of the ranks they would have received if there were no ties, e.g., 117, 119, 119, 125, 128 becomes 1, 2.5, 2.5, 4, 5. (If the two 119s were not tied, they would have been assigned the ranks 2 and 3, yielding a mean of 2.5.) My list looks like this:
Column_A Column_B
1
1
1
2
3
4
4
5
...
I need to rank a list that is not continious. I have used the rank function before but its always been in list of numbers.
How do i get the rank to work for example, I only want to rank on cells: B3, B6, B8, B10
What I want to do is rank both the top and bottom of a list.
I know how to rank but unfortunately the bottom will be changing (i.e.: the table size may change from month to month and this is where I have a problem.
I am ranking a table, then doing a lookup on the list to return other values based on the ranking.
What excel formula can I use to ensure I get the bottom 5 if the list length/table size is changing from month to month?
(Please note - I need to do this in excel - not as excel VBA)
I have designed marksheet in excel and want to list only pass student on the basis of their rank.
View 5 Replies View RelatedColumn A: multiple names of people, almost all names occur multiple times Columns B: counts how many times the name occurs in total
What I want in column C: if there are e.g. 18 times the name 'Peter'. I'd like to see in columns C that the first 'Peter' found has 1, the second Peter found has 2, etc; this offcourse for all names...
I am currently working on a football spreadsheet ranking players based on their fitness performance scores. For example, there are 14 persons on Offensive Line. I need all their test scores ranked out of 14. However, if there is a blank, I still need the test scores to be ranked out of 14.
As of right now, I have cheated, and inputted a random number to bypass the blank:
=IF($G12>10, 0,RANK($G12, $G$12:$G$25,0))
But, this now affects my average of the fitness testing scores for that position. This could be avoided if I could find a way around my first problem.
I want to rank a list of teams based on their win/loss record. The list is something as follows.
Team A0-3
Team B0-2
Team C2-0
Team D1-2
Team E2-1
Team F2-1
Team G0-2
Team H3-0
Team I1-1
Team J1-1
Team K2-1
The column with the actual score contains the formula, =INDEX('2009'!$C$3:$BL$3,MATCH($A4,'2009'!$B$1:$BJ$1,0)). I would like to rank the list to something like,
Team H3-01
Team C2-02
Team E2-13
Team F2-13
Team K2-13
Team I1-16
Team J1-16
Team D1-27
Team B0-29
Team G0-210
Team A0-311
I've got two long columns of dates and names. The dates and names can repeat. Eg:
01/01/14
Fred
01/01/14
Joe
01/01/14
Tom
[Code] ........
I want to input a date and create a list of names with only the names from the date I enter and earlier, and excluding names that appear again with a later date.
E.g. if I enter 01/01/14 I'd get:
Joe
Tom
But not Fred, as although he appears on 01/01/14 he also appears with a later date too.
I know how to use array formulae to create a unique list, i.e.{=INDEX($G$1:$G$760,SMALL(IF(ROW($G$1:$G$760)=MATCH($G$1:$G$760,$G$1:$G$760,0),ROW($G$1:$G$760)),ROW()))}
however this is giving all the unique items from column G and I only want the unique items that have a non-zero value in column H as well. This would be the sumif of all instances that would have to be zero. I've tried to crack it and I've tried to search for solutions but so far no joy.
I am looking to have the items in column K 1 through 16 listed from highest to lowest and at the same time post the corresponding number from column J 1 through 16.
So that it reads as follows:
04 - 18 - 06
02 - 17 - 06
08 - 10 - 03
Item 04 has 18 points and is listed in 6 columns etc.
How can I get Excel to do this?
I have a list of names that come from another sheet. I need to rank these by score and have used this formula:
[Code] ........
These names compete within their class but also within the class I need to consider (rank) a second category for example No or Yes. Also all names could be competing in the Yes category or for example 7 in the Yes and 3 in the NO. This will vary and is based on entry in another sheet.
The format is Class (column B), category (Yes or NO, Column C), Name (Column D), Score (Column S) and Rank (Column T)
If I include an IF statement =IF(S33="Yes", at the beginning of the above formula then I get all the Yes ranked perfectly. Is it possible to rank the others with the NO consideration?
Sheet1 *BMNO1GenderAge GroupTotalRank2Male6-72103*3Male6-71437*4Female6-71294*
I will have 200+ records similar to the above. I would like a formula that ranks the totals. The Males in the 6-7 Age Group would be in 1 Ranking while the Females in the 6-7 Age Group would be in another.
I prefer a formula over a macro. My original thought was =rank(n2,offset(?,?,?,?,?),1) but alas I'm missing something.
I want to calculate the sales rank of the customer whose CUSTOMERID is equal to my ID? Note that sales rank is what position the salesperson is in terms of DOLLAR VALUE OF SALES.
Just a bit stuck on this. How do I calculate the rank? Is it a If statement or a Vlookup Question?
The spreadsheet can be found here: http://www.megaupload.com/?d=5D0YCHIG (It's too big to be uploaded to the forum hosting).
I have a large spreadsheet where I've successfully ranked a large series of data based on revenue, using product classification as a criteria & summarising this on another page with the top 20 products. The problem I'm having is that within certain criteria's I have some products with the exact same revenue figure, so if the 2nd ranked product within classification "C" for example has revenue of $100, & there's another product within the same classification also with $100 of revenue, on my top 20 report I have results for the 1st & 2nd ranked product, but a blank for the third product & then results again for the fourth
The formula I'm using is
=IF(Y12="NA",0,SUMPRODUCT(--(Y12=$Y$12:$Y$6000),--(AC12
Need to rank by score1 in descending order and Serial # in ascending order. My biggest problem is to get the rank number to be consecutive. I have listed the rank I would like to see.
Score1
Serial #
Rank
90
146168
1
[Code] .....
How can I rank with 4 criteria that are ranked differently? (Greater/ lesser etc)
Ranking - Online Spreadsheets - EditGrid
I had a look into this, but I got a bit confused with how isnumber, big, small and rank actually work
Using Excel 2003.
I'm racking my brains as to how I can structure a formula to conditionally rank a value in an array against only those values in the array whose corresponding criteria cell includes a specific letter.
So for example I have a list of 12 values, say 126; 239; 0; 171; 162; 157; 130; 199; 122; 153; 0; 15.
Each of those values corresponds to a heading, say: CDE; DFE; FGE; DFE; ERD; DEA; BDF; DFB; CDE; CEF; CAB; FAB. As you will note some of the headings may or may not be the same and may or may not include the same letters in different orders.
How can I write a formula that ranks in ascending order a given value drawn from the above list (which will be in another cell but which in this case is, let's say, the first value: 126) only against those values whose heading includes a specific character, for example the character C (the character in question will vary and be defined in a specific cell).
As an added complication I need the ranking calculation to exclude any zero values. So in the above example what the formula needs to do is rank the value 126 against a sub-set of the whole array comprising only the values 126; 122; 153; 0.
The answer I need is 2 because, discounting the zero value, 126 is the second highest value.
What I am trying to do is give the rank in column D based on the values in columns B and C. Some of the values in column B will have then same rank, and as such I want to add further criteria on which to rank them. I would first like to rank the values in column B and then rank the values in column C, which should give the rank in column D. For example Dog and Frog have the same value of 400 from the Non UK column. Therefore, rather than having these as both rank 1, I want them to be ranks 1 and 2, so want to add another criteria (UK). As Dog is greater than Frog in the UK (i.e. 10>7), I would like to rank Dog as 1 and Frog as 2. Goat will be ranked as 3 because it had the thrid highest value in the Non UK.
ABCD
1Non UKUKRank
2Cat20055
3Dog400101
4Eel200114
5Frog40072
6Goat30023
It is a product list of office stationary with codes, descriptions and quantities. Using this spreadsheet we input into the quantity how many we want of the item, all well and simple you could call the list a stationary order form.
What I would like to be able to do with this Giant list is to have a function that would extract items off the list into a cleaner consolidated form. As in, if I wanted to order some of item A, C and F, I would like for the second table to just Show ACF without every letter in between or blank cells.
I know a simple method would be to have an IF formula to return the information to a new sheet that I could simply remove blank cell rows (unordered items) and ready for print each time. But I would love to know if there is a better way this could be achieved.
I have basic/intermediate knowledge of excel and can setup the data if need be in order for the function to work, but I can't seem to find the correct function for this project.
It's a quarterly schedule for utility meter readers, divided up into days across the top, and routes/areas down the side.
There's a space with each route for the employee ID to go, depending on who's doing it.
Down the bottom of the sheet, there's a few empty lines for all the available employees who haven't been allocated to a route.
On the second sheet labelled EMP LIST, is all the employee IDs. It's also got the areas they work- it's for something I want to implement later.
I can put all the employees into a single column list, then use basic DV to give a dropdown menu by each route, to assign an employee to it. This is pretty straight forward. I've also been playing with this in combination with a countif, so that employees already assigned do not appear in the list.
This is about as far as I've managed to get with it.
I need to get the employees who aren't assigned to anything to appear in a list below the routes. I'm fairly sure this is just another countif, but I'm not 100% on the exact formulas.
I also need the list in the dropdown menu to reset for each day of the quarter, i.e. if I assign an employee to a route on the 30th day of the quarter, their ID will disappear from the list for any other route for that day, but will still be there for the other days of the quarter.
So far the only way I've managed to do this is by duplicating the employee list for every day of the quarter, which is going to get very cluttered, and also makes staffing changes difficult. I'm hoping there's an easier way to do this using one data set.
I've added an example of the sheet. It's one week and it's only got about 1/3 of the routes we would actually have on any given day.
scheduledemo.xlsx
I found code online that I can put on my sheet to get my formatting properties to stay the same for the items in my dropdown list located on another page. However the code does not work for conditional formatted cells...which is what I need. This is the code that I have that will carry over regular formatted cells. Just not Conditional formatted cells.
View 1 Replies View RelatedI Attached a sheet for what i'm asking about ,, i sent it before but the sheet showing it more clearly
View 10 Replies View RelatedI have a list of names in B8:B200 (unique)
I have another list of names in I7:I15
I want to count how many names in B8:B200 that matches any of the names listed in I7:I15.
I am wanting to create a list where I can select multiple items within that list and then print only those selected items. I have created something similar thru data validation, but I can't get it to print.
In addition, I would like to be able to subdivide the list into multiple categories, then select items from these multiple categories and print them.
I have a large amount of data, 40,000+ rows about how students do in remedial classes including from whom they took the classes. I have pulled from it a subset of student success as relates to the separate instructors. Now I would like to extract a consolidated list of those instructors for whom the student gain on criterion based pre and post course assessments is above a specific level. I have no trouble writing if statements that will look at two types of data, the course taken and the average student increase to determine which instructors meet or surpass the criterion, but I can only do that within a list that includes all the instructors. Because there are more than an hundred such instructors, it would be easier for the dean if I could provide a short list of those that meet specific criteria. I believe that it would be an array that I should use, but I have been fooling around with this for 2 days now, and am finding myself at a series of deadends!
View 5 Replies View RelatedThe function below should return the value in a cell IF the string in the cell two cells to the left of it is "Nemo" Omitting the part highlighted in blue, my function returns a list of unique values...but when it's included, nothing is returned at all. Perhaps, there is an error in the syntax that I'm overlooking?
Function listUnique(rng As Range) As Variant
Dim row As Range
Dim elements() As String
[Code]....