Count Time (entries Per Hour)
I have a bunch of data and I want to be able to count the number of entries that fall within each of the 24 hour increments in a 24 hour clock. (military time)
For 12:00:00 all times would be between and including 12:00:00 and 12:59:59
Column B | Count
------------------
12:00:00 344
13:00:00 44
14:00:00 5
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Count The Number Of Entries On A Sheet That Match An Hour
I'm trying to Count the number of Entries on a Sheet that match an Hour. Looking through the availiable functions i found COUNTIFS, which is exactly what I want. However, when I try to compare the Hour values within the COUNTIFS arguments, there is an error. This is the function that I figured would work here: =COUNTIFS(HOUR(Sheet1!G:G), HOUR(E6)) which should count all entries in column G where its HOUR matches the HOUR in E6 (all are time format). I do realize that in the example above there is only one comparison made and i'm using COUNTIFS instead of COUNTIF, but i'll be adding other comparisons to it once i get this first comparison working.
View Replies!
View Related
Changing Date/time To Run A 12 Hour Production Schedule, And Not 24 Hour
I have created a daily schedule which has a number of factory variables taken into consideration which determine the date and time a particular product should, barring any mechanical problems, come off the machine. (see attached spreadsheet). The date at the top will be editable by me only so that when I update the production quantities, the “date/time off” column automatically re-adjusts to the remaining quantities. The formulas are a little long winded, but I have left them that way whilst I try and develop it. I should be able to figure out how to condense them later. My problem is that the “date/time off” on the right works excellent, but over a 24 hr period. Ordinarily, we work a 12 hour day (6am to 6pm) with overlapping shifts to cover breaks, and 20 mins warm up at the start of the day for the machine, thus maximising a 12 hour day. Of course if demand exceeds the allotted time we put on overtime. Is it possible to specify that normal days are only 12 hours so that if a product exceeds 6pm, it flows into the next day with the balance starting at 6:20am? And, if the production for the week exceeds the time could I stipulate particular days which we deem are suitable for overtime? Ie, we decide Wednesday is a 14 hour day and not 12. I had toyed with the idea of creating a 365 day table/calendar, on another worksheet which would have its individual allocated hours in an adjacent column and somehow link them to the date/time off, perhaps by way of a VLOOKUP, but I have been chasing my tail trying to figure out how to implement it.
View Replies!
View Related
CONVERT 24-Hour Time To 12-Hour Time
I have a list of FLIGHT departure times that are listed in MIL TIME, however, there is no : in the format. Its just 4 or 3 digit numbers. I need to convert these to time in 12-hour clock. If I go to FORMAT/CELL/TIME and select 1:30pm it simply makes the time ZERO!
View Replies!
View Related
Counting Entries Per Hour
My spreadsheet contains two text columns that represent dates and times; 11/21/2007 and 0935 for example. The rows are populated with the date and time for every event during a 48 hour period. A single worksheet may contain up to 3,000 events (rows). How do I create a subtotal for the number of events in each of the forty-eight 1-hour periods?
View Replies!
View Related
Time W/in Each Hour Of Day Btwn A Time Range
I need a formula to calculate the time (in hours/fractions of an hour) that is "covered" for each hour of the day between a range of times. In other words, I have a "START TIME" and an "END TIME" and for each hour of the 24-hour clock, I want to know how much time this range covers. For example, if my start time is 3:30am and my end time is 5:15am, for the 3am hour, the formula would return 0.5 hours, for the 4am hour it would return 1.0 hours, for the 5am hour it would return 0.25 hours, and for all other hours it would return 0.0 hours. The range of START TIME and END TIME can be up to 24 hours (but not more), but the tricky part is that the START TIME can be on the day BEFORE the END TIME (e.g., START TIME of 10:35pm and END TIME of 5:45pm the next day).
View Replies!
View Related
Time Sheet :: 12 Hour Time Format With AM/PM
I found a formula for calculating time in the HH:MM AM/PM =IF(B1<A1,B1+1,B1)-A1 This formula was to give me total hours in the cell for which it is entered, and cell format for the formula was in military format. I cannot find this post. The formula worked in OpenOffice Calc program, but when it came to converting to excel, I came up with #value! I want to enter the time in 12 hour format and using am/pm to designate. I am making it for someone to make work schedules with and they do not know military time.
View Replies!
View Related
24 Hour Double Time
I have a timesheet which for certain days of the year calculates double-time. What i would like to do is have a formula that gives double time for a 24 hour period. I have a formula setup with a start time and end time for my double time, but it wont stop at midnight.
View Replies!
View Related
24 Hour Time Adding
I have a start time in cell A1 (say 9am entered as 900), cell B1 has a time interval (25min), Cell C1 gives total (925). Cell B2 has the next time interval (56min). How do I get cell C2 to give total of 1021 rather than 981? Values in columns B and C continue on down.
View Replies!
View Related
Working With Time: Blocks Every Whole Hour
I have a spreadsheet that users input the temperature each hour, for a 24 hour period. The time used is 24hr clock, as example, cell A1 will be 03:00, and cell B1 would be the forecasted temperature. On another sheet, the user inputs the temperature for the specific time a airplane is going to take off, i:e: 07:32. Is there a way I can have the second sheet look back to the first sheet and grab the temperature for the correct time (using the hour block it falls into). The first sheet time blocks are every whole hour, i.e 08:00, but on the second sheet, the time could be any hour/minute, 07:32.
View Replies!
View Related
Calculating Time Across A 24 Hour Period
Calculate certain time increments for various work-shifts. I have a start time,finish time and increments of time across the spectrum of 24 hours. There are also multiple start time across the 24 hour period with some start times begining on one day and ending on the next day. Example In B5 Startime is 22:00 In C5 Finishtime is 06:30 In I3 increment begins at 00:00 In I4 increment ends at 00:30 The employee working the shift from 22:00 - 06:30 would fall into the time increment of 00:00 - 00:30 where another employee working a different shift (08:30 - 17:00) would not. I'm looking for a formula that would return a 1 in a cell if the employee fell into the 00:00 - 00:30 time increment and a 0 in a cell in the employee did not fall into the time increment.
View Replies!
View Related
Convert Hh:mm.* To 12 Hour Time Format
I have a ton of time in the above format (hh:mm.*) that needs to be converted to a 12 hour format (2:15 PM). I'm not wonderful with formulas, but if it's explained "simplistic" enough, I can probably get it. Please help - I've googled this to death every possible way. I can go in an manually change 19:37.5 to 7:37 pm - but it will take me FOREVER!
View Replies!
View Related
12-hour Time Entry Stored As Text
I have a problem with entering 12-hour time data in excel. If I key in 3:00, Excel will recognise it as 3:00 AM. If I key in 3:00 p, Excel will recognise it as a text entry. To get Excel to recognise it as 3:00 PM, I have to use the 24-hour format. i.e. I have to type 15:00. I have checked the Regional and Language option in the Control Panel. Everything looks fine. Does anyone have such encounter with Excel before?
View Replies!
View Related
Autofill Date/Time: Increment By 1 Hour
I have a column with dates + time under this format: 2005-01-01 00:00:00. I wanted the same thing for the whole year, so, I wrote 2005-01-01 01:00:00. in the cell below, and then did an autofill. Unfortunately, at some point, the cell goes from 2005-01-05 03:00:00 to 2005-01-05 03:59:59 which is a problem for me, because I was using the hour as an indicator. And hour(2005-01-05 03:59:59) returns 3 and not 4!
View Replies!
View Related
Count Formula: Count Total Entries In Columns
I have been using the wrong formula to count total entries in columns and only just found this error. The MAX formula in cell B4 is: =MAX($B$12:$B$36). If the all the rows are full within range F12:F36, then the MAX formula is fine to count the total within range B12:B36 (25) so I thought. But sometimes there are omissions between F12:F36. If there are 2 blank cells anywhere within F12:F36 for example, then B4 needs to show 23 respectively. In the sample WkBk B4 needs to show 8
View Replies!
View Related
Calculate A 24 Hour Cycle Time Which Excludes Weekends And Public Holidays
I would like to find out if a job took more than 24 hour cycle time (eg. 6:00 am to 5:59:59 AM next day). data: A1 = received date & time (format "m/d/yyyy h:mm") B1 = completed date & time (format "m/d/yyyy h:mm") my formula is '=if(B1-A1>"24:00"+0,"Yes","No"). The problem with the formula is that it doesnt exclude weekends nor public holidays. I couldnt formulate a solution using networkdays function......
View Replies!
View Related
Calculate Work Hour Phone Time By Day, Week & Month
I am trying to figure out a way to count the minutes used from 8am-5pm Monday-Friday. I have this years worth of data. I would like to do it by month and by week and by day. I use office 08 for the mac and its my understanding that it doesn't have VBA. I would also like to be able to figure out if on a certain date a employee made over x amount of phone calls in a day. But have several employees. I have columns that are labeled date, employee, minutes used.
View Replies!
View Related
Count Number Of Different Entries
I have a list of ID's, many of which appear several times. Is there a formula that will give me the number of different ID's? That is: CON001 CON100 CON050 CON001 the formula would give the answer "3" for 3 different numbers in the 4 total numbers.
View Replies!
View Related
Count By Unique Entries
I am hoping this can be done with formulae. Starting at C7 and continuing down the C column there is a list of names which could potentially run from C7 to C5000. This list of names will contain duplicates. For each name there is a corresponding 'reason' in the F column which will contain the word 'Truancy' or 'Late'. I need a formula that can count the number of UNIQUE names in the C column which correspond to the word 'Truancy' or 'Late' in the E column. An example, [Name].....................[Reason] C7 ...........................E7 John Potts.................Truancy 2 Matt Jones................Truancy 10 John Potts.................Truancy 4 Matt Jones ...............Late AM Pete Burns................Late PM Pete Burns ...............Late Both Steve Lopez..............Truancy 6 Count of unique names with the word Truancy in the corresponding E column = 3 [John Potts has 2 instances of the word truancy in column E but this is only counted once] Count of unique name with the Word Late in the corresponding E column = 2 [Pete Burns has 2 instances of the word late in the E column but this is only counted once]. I have also included a sample workbook.
View Replies!
View Related
Count Numbered Only Entries
I have a spreadsheet with data down column A. The data is either numeric or alpha numeric, however, it is not seen as numerical. Is there a formula I can use to count the total number of cells with only numbers in against other criteria too? I can use Sumproduct for 2 criteria but can't figure out how to do the 3rd.
View Replies!
View Related
Count Of Duplicate Entries
there are unique entries like AU0896 etc. that are repeated in my list. my job is to find how many unique entries there are and add the count at the end so, basically if there are 6 AU0896 entries, then I must create a AU08966 value.
View Replies!
View Related
Count Number Of Entries In A Sheet
I have a list of words in one column, some of which feature more than once, in random order, i.e.: Bird Plane Superman Superman Plane Superman Bird Plane I want to have a function that counts the number of times each word appears, so in the cell next to each entry for "Superman" it would say 3, for "Bird" 2 etc. If I add another "Superman" it should then change to 4 next to each entry. Also, I will be adding new words all the time, so the function needs to be able to cope with that too.
View Replies!
View Related
Time Between Cell Entries
How would I go about displaying in a cell the time from the last entry to the current but show 0 time if the range is empty? E5 to R6 currently has space for numbers to be entered. E3 has the command =NOW() I would like E7 to show "xxx minutes have passed since last entry" where xxx would show 0 while the range is empty.
View Replies!
View Related
Count Entries Only If Theres An Entry In The Cell To The Left
i'm trying to get a column to count all blanks but only if there's and entry in the cell to the left. for example i have a list of names which is picked up from my main database in column a, then in column b there's dates, non applicables and blanks. however the columns are longer than the list of names to allow for growth, so there's a lot of blanks at the bottom which i don't want to count. so is there a way to count only the blanks in column b if there's a name in column a alongside it
View Replies!
View Related
Merge Duplicate Entries For Count Or Sum
I often need to merge multiple occurences of data (such as account numbers or names) and to sum or count the values associated with each invividual instance (eg cost or number of entries). Data can often be thousands of rows and varies every time. For example: Col A Col B Ken 5.9 Ken 12.6 Brian 5.5 John 6.4 Fred 9.9 Fred 11.6 Fred 2.0 I need to be left with either a sum Ken 18.5 Brian 5.5..............
View Replies!
View Related
Summing Decimal Time Entries
Many years ago I created a complicated spreadsheet that calculated employees's leave, sick, vacation etc. The timekeeper would indicate the amount(s) used for a particular day and it would automatically calcuate. The problem with this is that the time keepers do not use .25, .50, or .75 for the fractured time. Instead they used .15, .30 and .45. Previously, I used a convuluted if statement looking to the right of the leave to figure out what and how to calculate it and I'm trying to revamp it to make it more streamlined.
View Replies!
View Related
Make Entries Into Time Log
I am creating a log to keep track of my start and stop times when I work on a project. I have two columns labelled START and END and I can use a macro button to make the current date and time appear in the cell under these headings. What I haven't been able to find is a way of getting the macro to move to a new blank cell ready to accept the next entry. For instance, move one cell to the right or move one cell down and one to the left. Can anyone tell me how to do this? (recording it just names the cell so it always goes back to that named cell.)
View Replies!
View Related
How Do I Show Multiple Entries One Time
I have an excel spreadsheet that has about 40,000 rows....and about 30 columns across. The two columns I'm writing this about is column "PO#" and column titled "VALUE". The PO# column will have a number such as 4500234567...and the value column will have the cost of the PO#, for example $5,000. Now within the the spreadsheet the PO# number and value will be listed multiple times....and there are hundreds of PO#'s listed, with its value. I would like to perform some kind of filter on a seperate worksheet (? or whatever i needed) that would show the PO# number and value once.
View Replies!
View Related
Show Date/time Between Entries
Basically each line signifies a date & time that a deposit was placed and a date & time that a withdrawal was actioned. My goal is to be able to determine what kind of average response time we have between the time a withdrawal was requested and the time a withdrawal was actioned.
View Replies!
View Related
Counting Entries Using Time Criteria
I need to generate a report that indicates how long it took a vendor to respond, and indicate if the time was less than 2 hours. I'm having trouble with a formula that will indicate how long it took for the vendor to respond during business hours (8-5 monday through friday). I can easily calculate the total elapsed time, but I'm at a loss on how to account for the after hours time period. Would this be better handled with VBA?
View Replies!
View Related
Count Number Of Full Time Periods Within A Time Period
I have thousands of timestamps that have a start & end date and time in 2 separate columns. (one named start and one named end...) I also have numerous set time periods that i'm interested in.. (about a dozen or so) for example 01/01/2008 - 05/01/2008, 07:30:00 - 10:00:00 What i need is to be able to count the number of times the full time period i am interested (07:30:00 - 10:00:00) in falls in between the thousands of start and end timestamps i have. The time periods must also fall within the date range specifed. So if my timestamps were Start: 01/01/2008 06:30:00 & End: 02/01/2008 11:00:00, based on the set time period above, there would be a count of 2 and if my timestamps were Start: 01/01/2008 07:05:00 & End: 02/01/2008 09:00:00 there would be a count of zero as there is not a full uninterupted timeperiod 07:00:00 - 10:00:00 between these timestamps. and if my timestamps were: Start 01/01/2007 07:00:00 & End 02/01/2007 10:00:00 the count would be zer as this is a year early!
View Replies!
View Related
Count Unique Entries Within Variable Date Range
Using the DCOUNT function is generally a straight forward proposition but I'm not getting the expected results and would like for someone to take a look and help me understand why. Goal: create a count of unique entries within a defined variable date range I have a data table with duplicate values and need to count unique entries, the result of which will be used in a calculation. Due to a requirement to track the counts in a rolling 30-day period, the flexibility of daily selecting the date ranges is a necessity, which is why I chose to use DCOUNT and feed dates into the criteria cells. I've been attempting to use the DCOUNT function but I'm not getting the correct result. Oddly, after duplicating the table and formula on the "Count Repeated Items Once" page, even those results are incorrect. It seems, too, that COUNTIF does not like (accept) dynamic named ranges. Hard coding the range into the formula yields a result of TRUE, but using a dynamic named range gives FALSE. Anyone else experience this and is there a work around (that is, if I have not erred in its use)?
View Replies!
View Related
Count Unique Entries In One Column That Meet Conditions
I tried to ask this question yesterday -- but it was a follow-up question stuck at the bottom of a thread. So, with your indulgence, here is a simpler version of the question, complete with an attached spreadsheet, if you wish to use it. I also closed the other thread by marking it "Solved", since it answered my initial question.] The situation: I have two columns of data. The data is not in alphabetical order, and every column includes duplicate values. namegender jones m martinf smithf collinsf wilsonm jones m martinf hughesm wilsonm martinm smithf west f jones m west f martinm The challenge: In one cell, count the number of unique names that appear in the name column 3 or more times... with the additional condition that each unique name (which appears at least 3 times) must include at least one one woman! The correct result: ...
View Replies!
View Related
|
TRACKER
