Counta With A Tweak - Countif(?*)
Jul 5, 2007How do I count the number of cells in a range that has text, even though all cells has a link....
View 9 Replies
ADVERTISEMENT
Combining 'counta' And 'countif'
Oct 1, 2008I'm trying to create a report to show daily statistics for internet traffic. I have a large table showing a daily breakdown of performance, a table showing combined cost for all "Mondays", "Tuesdays" etc in the month and I also want a table to show the "average" performance for a typical "Monday", "Tuesday" etc.
The report will be used on a daily basis and I realised that until there is a full compliment of data the daily averages table would be inaccurate as it will be dividing the overall total for each day by the total number of occurances each day has in a typical month. This is wrong because if we are only halfway through the month then we will be dividing by days that haven't arrived yet.
Possible To Use COUNTIF And COUNTA In Same Formula
Jan 30, 2013I am using the following formula to calculate the number of responses:
=COUNTIF([Cleanliness of Environment:],"None of the above")
However, I only want the number of cells which contain words other than "None of the above". The formula is counting empty cells. Is there a way to weed out the empty cells and receive a tally of only cells with words other than "None of the above" in them?
Countif Function In A Macro: SUM And COUNTA Works
Jan 27, 2009I'm using the SUM, COUNTA and COUNTIF functions in a macro. The SUM and COUNTA works but the COUNTIF function does not return results.
Sub B_Test()
Dim myRange
Dim Results
Dim Run As Long
myRange = Workbooks(1).Worksheets("Master").Range("S6", Range("S6").End(xlDown))
Range("M3") = Application.WorksheetFunction.Sum(myRange)
myRange = Workbooks(1).Worksheets("Master").Range("D6", Range("D6").End(xlDown))
Range("D3") = Application.WorksheetFunction.CountA(myRange)
End Sub
I have tried countless ways to rewrite the COUNTIF line with no results or compiler errors returned. Originally had problems with the SUM and COUNTIF function and found that column formating was the problem. After clearing all column formats, the SUM function promptly began working but the COUNTIF keeps eluding all my efforts. The column which the COUNTIF is pointed to contains values of 0 to 500. Only values greater than 0 are to be counted.
Sumproduct OR Adding Criteria To Countif, Counta And Average
Feb 21, 2010I trying to convert the following formula (I, II, III) and add criteria of Name and Date to the count values of “c”
CURRENT FORMULA
I: “=COUNTIF(C2:C3100,"
Little VBA Tweak To Some Next Row Code
Jul 8, 2009I want this code to only stop on rows where cell K has the value "planned"
Though only if you have the checkbox "Only show planned" checked...
I have all the pieces though no idea how to get started?
Private Sub NextRecord_Click()
Dim r As Long
If IsNumeric(RowNumber.Text) Then
r = CLng(RowNumber.Text)
r = r + 1
If r > 1 And r
Color Code Tweak
Mar 18, 2009I am using the following code to change colors in set of autoshapes (Thanks Colin_L and Norie) and it works fine for the first autoshape but has it has no effect on the subsequent autoshapes. I plan on using the code for about 200 autoshapes, I thought I could just copy the first code and keep adding it on for each autoshape... I am guessing that the code is stopping after the first set and not continuing?
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$C$46" Then
'Change autoshape color to red depending upon cell value, or blank of no value is entered.
With ActiveSheet.Shapes("Rectangle 1").Fill.ForeColor
If Target.Value = "" Then
.SchemeColor = 1
ElseIf Target.Value >= 422 Then
.SchemeColor = 50
ElseIf Target.Value >= 1 Then
.SchemeColor = 10
Else
'it must be less than 1
End If
End With
End If......
Tweak Of Syntax On Named Range
Nov 17, 2008just need a hand tweaking the syntax on a names range.
Range 1
=INDEX(Sheet2!$C:$C,5):INDEX(Sheet2!$C:$C,ROW(LRow)-1)
LRow: Is a named active row for the last row. [say row 10]
This named range only selects ONE Column
How can I get it to select TWO columns [ie C & D] as in the example below does. It does it by the last number 2, goes two columns wide?
Range 2
=OFFSET(Sheet2!$C$5,0,0,COUNTA(Sheet2!$C:$C),2)
I can't figure out how to express that in the Range 1?
Find/Search Code Tweak In Cells
Jun 12, 2009The code below will locate and select cells containing Kenny. What I want to do is create a little search cells(C5) on my spreadsheet and have the code reference whatever is typed into the search cell. I'm sure it's a simple adjustment. I've tried changing the What:="Kenny" to What:="=C5" & What:=C5 all without success.
Sub find()
Cells.find(What:="Kenny", After:=ActiveCell, LookIn:=xlValues, LookAt _
:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:= _
True).Activate
End Sub
Parsing Imported TEXT File But Like A Tweak...
Nov 17, 2009I have attached two files, one the sample txt file imported to excel but the top area is highlighed with some notes and section break. RED deleted don't need amd un highlighted is actual data. The other file is what I would like to see the data look like after parse.
View 5 Replies View RelatedCountA Function Using VBA
Dec 18, 2006How can I make it work ?
Sub test2()
Dim Wbk, aaa, bbb
Wbk = "\server1folder1file1.xls"
aaa = Application.WorksheetFunction.CountA(Workbooks(Wbk).Sheets(1).Range("A:A"))
bbb = MsgBox(aaa)
End Sub
Counta And Validation
Jun 18, 2009How can I add validation to cell B76?
If there is no text in B71:B75 then don't allow a value in B76.
This would force them to add text description before entering a price.
Counta Within A Range Of Numbers
Sep 16, 2009A cell that will count an entry in another cell, within a range of numbers. EX: cell g1 will count the entries that range from 1000 to 1999 and 5000 to 5999 and 7000 to 7999. cell h1 will count the entries that range from 2000 to 2999 and 6000 to 6999 and 8000 to 8999. So if i had 6 cells with the following entries:
cell a1 - 1010
cell b1 - 2230
cell c1 - 5699
cell d1 - 6521
cell e1 - 7001
cell f1 - 8035
cell g1 would show 3
cell h1 would show 3
CountA In VBA To Return Value To Textbox
May 14, 2014Code:
Private Sub custcountTB_Enter()
custcountTB.Value = Sheet5.Columns(1, 1).FormulaR1C1 = "=COUNTA(R[-4]C[-3]:R[95]C[-3])"
End Sub
All I am after is to count how many customers there are and show the value in text box.
CountA And Blank Cells
Mar 8, 2007I understand the non blank cells part of Count A but not the additional values part. I have looked at the examples in teh MS help and it doe not help at all really.
A1:Data
A2:Sales
A3:11/01/1900
A4:
A5:19
A6:3
A7:FALSE
doing =counta(a1:a7,2) returns a value of 7 but why? There are six non blank cells and no cells containing a 2
Dynamic CountA Values?
Jan 5, 2008Say there are two changing values in a spreadsheet: A row reference, and a column reference, called sRow and sCol.
sRow and sCol are integers, and they are also changing values.
I want to know how to find how many cells have something in them on row R, starting from column C to infinity (To the right). But the problem is that R and C change sometimes, so I have to make some sort of dynamic CountA formula.
I know I have to use CountA() to do this, but I don't know how to make the range reference just from two integers. What I have tried so far is CountA($sCol$sRow:$sRow), but this does not work. How do I properly format this formula?
Multiple IF & COUNTA Functions
Sep 25, 2008I've tried many variations but I can't seem to find a solution - I hope you can help. I'd like a formula that will ideally achieve the following:
IF B5:F5 all contain the letter y then return "Pass"
IF B5:F5 AND G5:K5 all contain the letter y then return "Merit"
IF B5:F5 AND G5:K5 AND L5:K5 all contain the letter y then return "Distinction"
IF B5:F5 is blank return blank
IF there are Y's in B5:F5 and the total < 5 return "Fail"
I did a sample sheet to show the desired output but don't know if this forum supports attachments.
Empty Cell Keeps Getting Counted With CountA?
Feb 26, 2014I am copy/pasting arrays of numbers from several sheets into a main sheet.
The arrays are placed in separate columns next to each other. However the array sizes (Rows) varies in size
In the main sheet I have placed a =CountA function that counts numbers of non-blank cell within the columns, see sample file.
However sometimes it apparently counts cells that appear to be empty. I mean the cells are visibly empty, but gets counted anyway.
Is there an easy work-around or is it the general use of the formula?
CountA - Dynamic Range - Macro
Sep 6, 2007I recorded this macro based on a column with a drop down window in which data has been filtered .....
View 12 Replies View RelatedDifference Between COUNT And COUNTA Functions
Oct 8, 2011I've long wondered what's the difference between these two formulae - COUNT() & COUNTA(). Even if I apply COUNT() function on a range of cells with intermittent blanks, it still returns the count of the values in the range. How different is this from the COUNTA() function?
View 2 Replies View RelatedCOUNTA IF Criteria Based On 2nd Column
Nov 12, 2012I have a sheet with 2 columns. First Column lists sizes of Devices. Second colum lists a servername. Example:
A B
30 server_a
30 server_a
65 server_a
65 server_a
45 server_b
45 server_b
15 server_b
What I want to do is a device count, not device sum on a criteria based on Column B.
For instance whenever column B equals servername A, then count how many devices it has.
This would equal 4 instead of 190 which is the sum of the devices. I can do a sumif statement, very easily, but I don't want a sum, I just want a count.
COUNTA Function After Blank Cell
Oct 2, 2008Is there a way to use the COUNTA function in cell A1, that will return the total number of cells containing text in the rest of row 1, BUT, will start the count over after a blank cell.
EXAMPLE: A2, A3, A4 all have text added on a daily basis. The value returned via COUNTA in A1 = 3 (after the third day). However, A5 is blank, then A6 gets text on the 5th day, and now I need the returned value in A1 via the COUNTA function to = 1, because we started over after a blank cell.
Possible?
VBA CountA Function For Variable Range
Apr 22, 2006I am trying to produce VBA code that will perform the CountA function on a variable number of lines in a column. My macro first sorts the worksheet by department number and then inserts 2 blank rows when there is a change in departments. Most departments have several rows of data, but some may have only 1. In column N of the first blank row following each department, I want to count the number of rows for that department.
View 3 Replies View RelatedCOUNTA And Sum: Counts How Many Week Days There Are In A Particular Month
Feb 4, 2010I have using the following Formula: =COUNTA(A3:A7,A10:A14,A17:A21,A24:A28,A31:A35)
Basically is counts how many week days there are in a particular month. Now I have a cell (B47) that counts how many Bank Holidays are in that month. I am having trouble using the formula then minus B47. I must be missing something really simple.
Using COUNTA To Retrieve The Number Of Cells That Are Not Blank.
Feb 11, 2010I am trying to use =COUNTA(A25:A500) to retrieve the number of non blank cells. Only problem I am having is that the cells that are blank are also using a formula to gather its data. The cell would be blank but the formula is still there, so using =COUNTA(A25:A500) returns all these cells with the formula also.
View 4 Replies View RelatedSetting Counta Range Based On A Date
Apr 2, 2009I've got two sheet's in a workbook. The first contains data and is setup with dates in column A, day of the week in column B, and values going across by day in column's C through H. As an example it looks as follows:
View 5 Replies View RelatedCounting Non-Blank Cells - COUNTA Returns 0
Jan 19, 2012I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.
Code:
=COUNTA(Mem!$M:M)
The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6
Adding Rows And Products Based On Counta
Sep 16, 2013I am trying to write a VBA code that does the following: The table below provides a sample of the Source (i.e how we start off with) and the Result (i.e how the format needs to look like). More specifically, for each product in 1st column that has a number in blue and or red column i need a row inserted immediately below (hence the counta function to indicate how many empty rows to insert). The end result should have a separate line for each blue/red colour depending if there is a number shown in the source data. Obviously the result should be displayed in another sheet (i.e sheet2).
PRODUCT
BLUE
RED
COUNTA
PROD A
9902
1
[Code] .......
Setting Named Ranges (OFFSET/COUNTA)
Oct 19, 2007I am a novice excel and VBA user, but have been working the past few days on a project to create a data entry form (using Excel 2003 on WinXP). I have the userform created and the textboxes working fine for inputting data into the spreadsheet. I also have comboboxes set up, and if I directly input data into them, they also input that data. So far, so good.
(problem)
Here is my issue: I want the comboboxes to use dynamic / variable ranges, so I have been trying to set up the ranges by defining them as names. I've come across a bunch of examples, but none of them seem to work (all produce an error that the formula is not correct or instead seem to reset the name to just the first cell when I input it).
My sheet is called Dropdown Lists, and there is a column here for each combobox. Each row in a column has the options I'd like used for that combobox. So I am basically trying to name a range as the entries in just one column.
This is what I have been working with most recently in the Name - > Define dialog box that according to everything I read -SHOULD- be working:
=OFFSET('Dropdown Lists'!$A$3,0,0,COUNTA('Dropdown Lists'!$A:$A),1)
This produces an error, that when you hit OK highlights "$A$3" - and if I remove the $ symbols, it skips then to the "$A:$A" until I remove THOSE $ symbols, and then excel will accept it, but when I go to the name, it only highlights one cell. I thought maybe that was OK, but when I tried putting the name into my rowsource, nothing happened - so apparently not.
Questions:
(main question)
- Why will this not input correctly when everything I read suggests this format? Am I not handling the space in the worksheet name correctly (with ' ')? Sometimes excel will automatically add in " " between = and OFFSET and the closing at the end, but this also has not helped. One source I read even recommended taking off the = at the start (also did not help). Am I missing something here?
(follow-up questions)
- Why are you supposed to use "$" before the cell references anyway? I've looked for an answer but haven't found one yet... is that for when you make cell references to cells on an external worksheet?
- What is the "Add" button for on the Name -> Define dialog box? I'm confused to if I am supposed to use this to add the name to the list of defined names, or just hit OK?
- At the bottom of the Name -> Define dialog box is the "Refers To:" field with the formula. On the right of that you can hit a button to go to what seems like another (smaller) formula input box. Why would I ever use that when I could just type it in on the previous box? There is no label for it so I am guessing here - but does it actually do something else (like you need to go to that smaller dialog to input new formulas and the previous box is only for -viewing- formulas, or?)?
Automatically Insert Blank Line When Value Of Cell A Changes And Use Of COUNTA Formula
May 29, 2013I need to do two things in my Excel spreadsheet: 1) I want it to insert a blank row everytime a value in the 1st column changes. 2) In the blank lines, I want to do a COUNTA for each of columns G through N. If I can get the program to insert the blank rows...they will not be a set # of records apart...some will have 3 records & some might have 17 records. Is there a way to automatically cause #2 to happen instead of having to choose the function icon and then tell Excel the first and last cells in each range?
View 1 Replies View Related