i have 10 sheets in my workbook and i wanted to do countifs on every sheet for column a so i have created 2 more sheet one called start the other call end and moved them start before sheet1 and end after sheet 10
this is the formula i was trying to use =COUNTIFS(Start!:End!A:A,finished!A3)
i have created a file for tracking my employee trandiness however, when i want to count the M, P, X ,L & AP keys which i already created it gives me OK for one month but when i tryied to calculate more than sheet "month" gives me error !! i used the below farmula :
=COUNTIFS(tblJanuary[@[1]:[31]],KeyPersonal)
how to calculated the above fx in every month. !!
I have a list of information regarding jobs that need to be carried out by a number of companies by a number of dates. What I want to count is the number of jobs that company A need to caary out by a specific date and then the number that company B need to carry out by the same date. The formula basically needs to say countif column a equals company A and column C equals 11/11/09. I have tried numerous combinations of IF, Countif, SUMif, And etc but can't get the formula to work,
View 9 Replies View RelatedI am having a problem getting my formula to return a result. The basics are that I would like a count of a specific set of data in a section of a workbook. So in column 'A' I am searching for 'TextA' but this also has to have 'TextB' in column C. The problem is I have 12 consecutive monthly worksheets I would like to pull this data from and I only really want to write one formula. I can (and started to) use the countifs function plus countifs function etc referencing each worksheet individually but this seems long winded.
I have read on this forum that I can use sumproduct combined with countifs but I can't seem to get it right. I have listed my formula for a single sheet countifs function below, but I don't know how or if to include the sumproduct function to reference the rest of the monthly worksheets. The other thing I should mention is that there are other worksheets too, so it would need to be specific to this range, but they are consecutive within the workbook.
I am currently trying to create a Formula which will count my data on a range of conditions.
Here is an example of my data:
A
B
C
1
Active
4 - High
3 - Medium
[Code] .....
This data then continues on for a number of rows. Basically I want to count the cells which contain "Active" or "Tolerated" in row A which also has a score of 4 or 3 in column B and also a score of column 3 or 2 in column C. So the formula should count Rows 1 and 4 in the above scenario.
The problem I have is the data in B and C contains text as well as a number so I assume there is not a way to use a greater or lesser than operater? and instead I will need to add a condition to just search the cell which contains the number 4 or 3 in column B for example.
I have had a go at this but am not getting very far. Would COUNTIFS be the best formula to use for this?
I would like to count the number of values in column B IF the value in Column A is equal to a value from a range of cells.
I would like the formula to be in cell E7. And the range of cells containing the values is in column D.
Here is my workbook Book1.xlsx
This is the function I have now: =COUNTIFS(Sheet1!A:A,Sheet2!A2,(Sheet1!E:E),"*") and it works great, counting every cell with a value in column E.
When I make criteria range 3 another column (criteria also being"*") my numbers actually start going down. I think it might be averaging the two columns out or something but I just want it to count all the cells with values in it from multiple columns and give me a total count.
I have 4 columns total that I want to be able to get a total count from.
I want to count the number of occurences involving 3 columns of a spreadsheet, but one of the columns is a date/time field, and I only want to analyse the date.
Example:
A B C
John 1 02/07/2009 09:45:10
Peter 1 03/06/2009 10:14:12
Fred 1
Peter
John 1 02/07/2009 09:45:10
How can I ask how many occurences of John are in column A, with a 1 in column B, with the date 02/07/2009?
I have multiple rows of data per each column. I'm trying to count rows that match a value that ISN'T any of the expected values in column A as well as a certain value in column G. This is in case future data is introduced that doesn't match the existing codes.
I'm trying to count all rows that DON'T have a value in column A beginning with PUA or P9V, so far I am trying this:
=COUNTIFS(A:A,"<>P9V*""<>PUA*",G:G,"P")
But it only seems to work on the "<>P9V" part. When I put P's in the column G of which the column A matches PUA*, it still counts the cell. I've tried a couple of AND variations but none are working.
Need to use CountIFs formula to evaluate multiple conditions in the same column. Here is the formula I tried. It works for Resolved but returns 0 when i try to add Duplicate.
=COUNTIFS('P12 Source'!H:H,A18,'P12 Source'!F:F,"Resolved,duplicate")
Also used this formula with success by referencing a cell that had "Resolved" in it but when I tried to add another cell with "Duplicate" it again returned 0.
=COUNTIFS('P12 Source'!$H:$H,A19,'P12 Source'!$F:$F,'P12 Source'!$F$75)
I am unable to get the correct results using Sumifs and Countifs function. Below is an example:
If I use the formula as =IF(ISERROR(SUMIFS(F2:F8,B2:B8,"Africa",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"2B",E2:E8,"SY")/F9),"N/A",SUMIFS(F2:F8,B2:B8,"Africa",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"2B",E2:E8,"SY")/F9)
I get the result as 0 but the result i want is 19.67% (1234 /6275). Since i have multiple criterias which might not be available at times in the data, i get the value as 0.
BCDEF2CountryMain Conseq.Other conseq.Product Type Amount 3AustriaInternalNoneInt2B $ 278 4AustriaExternalNoneExt3C $ 900 5AustriaExternal-8A $ 2,388 6NorwayInternal-MV $ 567 7AfricaExternal-SY $ 1,234 8AfricaInternalNoneIntJN $ 908 9TOTAL $ 6,275
Similarly i have used a formula using Countifs; =IF(iserror(countifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=3C")+counifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=2B")/F9),"N/A",countifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=3C")+counifs(E2:E8,B2:B8,"Austria",C2:C8,"External",D2:D8,"NoneExt",E2:E8,"=2B")/F9)
And even the above formula does not work with the criterias given. What i require is, if the country is "Austria", "External", and "NoneExt" then count those lines which has product Type as "3C", 2B". So the result for the above should be 1.
Request you to kindly let me know the correct way or the right formula to extract data for the above criterias.
I am trying to populate some results using countifs formula with multiple criteria. below is the formula am using and the last two criterias are dates
=COUNTIFS('Unproccessed CIT'!$B$5:$B$411,Summary!$A$4:$A$35,'Unproccessed CIT'!$G$11:$G$417,"<>"&"closed",'Unproccessed CIT'!$A$5:$A$38,">="&$C$2,'Unproccessed CIT'!$A$5:$A$38,"<="&Summary!$E$2)
Results:
#VALUE!
I created the following in Excel 2007 but need to come up with a replacement formula in 2003.
=COUNTIFS('Data High'!AM2:AM999,"0",'Data High'!AN2:AN999,"Non Corp",'Data High'!AL2:AL999,"No")+COUNTIFS('Data Medium'!AI2:AI2000,"No",'Data Medium'!AJ2:AJ2000,"0",'Data Medium'!AK2:AK2000,"Non Corp")+COUNTIFS('Data Low'!AA2:AA5000,"No",'Data Low'!AB2:AB5000,"0",'Data Low'!AC2:AC5000,"Non Corp")
With this spreadsheet i pull data straight from a database and place it in to 3 separate worksheets. The first worksheet which is the summary sheet then updates all the totals of certain occurrences. The above formula is the same format for all fields in the summary with a few variations. But they all have the following in common. They draw data from all 3 worksheets and total it all up, and each countifs looks at 3 different cells.
In terms of replacing it i have tried to use something like =SUMPRODUCT(--('Data Low'!AA2:AA5000="No")*('Data Low'!AB2:AB5000="0")*('Data Low'!AC2:AC5000="Non Corp")) but don't seem to be getting it right.
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
I have a workbook with 26 sheets, labelled A to Z. Column A in all the sheets have names from rows A6:A35.
I need a macro or a code to extract all the names from each of the 26 sheets and paste it to a new sheet 'Names' under column A, such that names starting with 'B' paste under all the names 'A' and so forth till 'Z'.
I've got data being scraped from a site, putting 1 new workbook in a folder each day
each workbook has 40 sheets in it.
i need to run 5 modules in sequence on a sheet then loop to the next sheet and run the same 5 modules.
ive writen all the modules, and can loop them through the sheets in sequence but i cant work out how to loop them through the each workbook in the folder..
is there an easy way to do this or can it not be done because it would need access to the folder that holds all the wordbooks which lives outside of excel on the desktop ?
I would like a macro to be able to save 26 tabs within the one document to individual PDFs.Preferably I would like to be able to specify each time exactly which tabs get printed, because often I don't need to print all 26, just the first 10 or so.I would like each PDF to automatically be named with the value in cell E10 of each tab.E10 already has a formula to create its final value. It references cells from other tabs within the same document. Hopefully the fact that this cell has a formula in it won't affect my ability to use the resulting value as a 'save as' reference?I would like it if the PDFs save to the same location as the Excel sheet from which they're generated is located. The location of the excel sheet will change every three months, so I'd prefer not to specify a location with a specific filepath, as it will have changed by the time I run the macro again.
I am using Excel 2010.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
I've got no clue about all this, but I've had to get specific formula examples and fill in the blanks in order for my timesheet to work. There's just one final problem if somebody could please help.
This is a timesheet for a 5 day work week. I need to count the number of unique log numbers for a specific activity. The log numbers counted must be unique across the entire week, not just for each day, which means I want the formula to count the unique log numbers across multiple sheets.
The formula also has multiple conditions. I got 2 columns. The first part of the formula needs to verify a word, say, "split" and if it does it checks the adjacent cell for a unique log number. If both arguments are true, it counts the log as 1 unit.
Here is a working formula for only one page.
=COUNT(IF(D4:D29="split",IF(FREQUENCY(C4:C28,C4:C28)>0,1,)))
Here's 2 problems with this formula:
1. I will count if it encounters a blank cell in the Log numbers the first time (which will happen as not every activity we do has a log#), but it will stop counting if it encounters a second blank cell.
2. I don't know how to make it work across several sheets.
This is an alternate formula which works and skips the blank cells, but I don't know how to add the multiple condition of "split" and to have it work across multiple sheets. I just copied it Microsoft. As I said, I don't understand it, I just fill in the blanks.
SUM(IF(FREQUENCY(IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""), IF(LEN(C4:C29)>0,MATCH(C4:C29,C4:C29,0),""))>0,1))
I've got several worksheets that all have the exact same layout that a user will enter unique information in to each worksheet. Then I've got a final worksheet that I want to have a button that the user can click and when they do, it will look to each worksheet and do the exact same process for each worksheet as follows:
It first looks to see if the worksheet is visible. If it is, I want it to copy the range A5 to K5 down until it gets to the last non-blank cell in column C. The first non blank cell that will be referenced will be C7. Then I want it to paste this information into the range A5:K5 on the final sheet named Sheet8 with the same values and keep cell formatting such as width and height, font. If the worksheet is not visible, it skips the sheet.
I want it to do this for each visible worksheet, placing the next visible worksheet info under the previous visible worksheet info. My current code as shown doesn't do that. It requires that something be inSheet8 A6 before it will even paste, then it pastes the info from A5:K5 but it doesn't do just the values nor does it keep the formatting. What I mean about not doing just the values is some of the info that needs to be copied comes from a drop down they can choose from and it copies the actual drop down menu. Also, it seems to copy all of the ranges from each sheet and paste it into just A5:K5 on Sheet8 and overwrites each other instead of pasting Sheet2 just below the information from Sheet1. So the only information shown after the entire process is completed is the information from the last visible sheet.
If Worksheets("Sheet1").Visible = True Then
Sheets("Sheet1").Range(Sheets("Sheet1").Range("A5:K5"),
Sheets("Sheet1").Range("C7").End(xlDown)).Copy
Sheets("Sheet8").Range("A5").End(xlDown)
End If
[Code]...
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
{=INDEX(Jan!$B:$B,SMALL(IF(Jan!$A:$A=Smith!$A$2,ROW(Jan!$A:$A)),ROW(1:1)))}
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies View RelatedI've attached a sample sheet to this message.
What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.
For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.
Sample Data.xlsx
Index across multiple sheets returning multiple values
I am building a payroll workbook and I need to build a sheet that will allow me to choose an employee name and the formula will return all the data related to this employee. I found this forumla to do this: =IF(ROWS(...)<=...;INDEX(INDIRECT(...);SMALL(IF(...=...;ROW(...)-ROW(...)+1);ROWS(...)));"")
But in my workbook, the data is on multiple sheets . How do I adapt this formula to look into 12 sheets?
that data would be returned in order of the date of the pay.
file: Test formula on payroll_v3.xlsx
I have a need to populate a summary worksheet using two variables to find data in two or more other worksheets.
I find writing out what I want helps some times so let me try it here.
So my variables are:
Product (there are 22 products)
Supply Less than (inset number)
These are the two criteria I want to use to produce a result.
The next issue is I have 300 stores that carry said 22 products. Each store has a unique number 0001, 0002, 0003 etc. So in a separate worksheet I have a list of the store numbers, and then the products. So each product has the store's number to the left in Column A, Column B has the product name, Column C has the quantity on hand.
What i would like to do on the summary page is select the product, and then select the supply less than or equal to 'x' and then have the stores with the selected product less than or equal to x display below.
The last part of this is then to display (data from an other sheet) on the summary page which contains the quantity of the product selected available at the warehouse for that store.