I have a column for EE or SP and a column that has an amount of insurance
coverage like 10,000 etc.
I want to count the total number of EE have that level or type of coverage
My columns are like this:
C1 EE K1 10,000
CE SP K2 200,00
I have tried numerous formulas from the various discussions and I can't find
any that works.
I have a list of around 50000 names. I need to count how many are unique.
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies View RelatedI have a spreadsheet for tracking jobs. Most everything is based off of week # rather than date. I am trying to get the stats page of the workbook to tally the total number of late jobs per week.The current week is taken care of because there is a function that automatically displays on time yes or no and I just set it to count the yeses or nos.The problem I am having is for past weeks.
I tried- =COUNTIF(Table2[On-time],"No"+(CountIF(Table2[Week # Hidden],"<Weeknum(Now())" but that doesn't work. I also tried isolating the < like this. =COUNTIF(Table2[On-time],"No"+(CountIF(Table2[Week # Hidden],"<"Weeknum(Now()) and that did not work either.
------ UPDATE
In response to using CountIFS I have also tried-
=COUNTIFS(Table2[On-time],"NO",Table2[Due Week '# Hidden],"<Weeknum(Now())") this just returns a zero value even when I have a late job listed three weeks ago.
How would I go about counting the number of times TA shows within strings of text in a range within a sheet. Example: TA,MH in cell A2, CB,TA in cell C40, ES,TA in cell Q19. Result would be 3. Ideally, I'd like the formula to reference a cell that has TA as the look up data such as in A1 I'd have TA.
View 4 Replies View RelatedI need to know wich formula or VB method, I have to use to count the number of cases in a range of colomns and rows C4:G107, have the same number. For eaxample how many times do I have number 1 and so on...
View 9 Replies View RelatedHow do I create a formula that will count the number of times in F7:H106,
where the number "0" occurred and had a value of "1" to occur
in the previous row in the range, if no number "1" in previous row
then ""
examples
if G22=0 and G21=1, then count 1
if G12=0 and G11=1, then count 1 more
I have a problem that when I try to convert text to number and format the number without 2 decimal places as seen on the link I have given below, Instead of 1607.947, I get 1607947. I have Excel 2010 loaded. The details are in below picture.
[URL]
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
id
event_name
C83-858
sample_1_arm_1
[Code].....
Text to Number or General.xlsx
The included, small database is formatted as text. It is a text feed from an outside source. I simply want to format the cells into either numbers or general format but not text... seems simple, and it should be, but the only way I can get this done is to go to each cell and access the formula bar and re-enter the number by pressing Enter.
I used to get data from a database (CorVu & MIMS) in this format "0122458/001". Due to changes in those Databases I now get the data as 2 columns " 0122458" and "1" .What I need to do is somehow get this back to the old format including the leading zeros.
View 8 Replies View RelatedDoes clipboard method gettext retreive the text from clipboard only, not number? What if numbers are copied (Ctrl C) to clipboard?
View 9 Replies View RelatedWhat If we had to replace any number..
Lets say, if we had to seperate NUMBER TEXT NUMBER in different combinations....
B2 contains values like these then
TOM CRUISE 12
TOM 5879 CRUISE
TOM CRUISE 123456789
123456789 TOM CRUISE
123 TOM CRUISE 456
[ = SUBSTITUTE(B2,"1234567890","") ]
I am at my wit's end pondering over it?
How to make the SUBSTITUTE function work for each individual digit?
Here's the data set I am working with.
I get a dump that is in the form xxxx gbps or xxxx mbps (gigabits and megabits). I'd like to either use a formula or VBA code to convert this to mbps in another column.
I have a standard block of text with numbers in it pulled from various calculations in a financial model. I have done this through a formula
e.g. ="You gross profit percentage is " & D9 & "% and your gross profit is $" & D10 & "." Problem is i'd like to format the numbers that pull through so they are easier to read. At the moment in the above example D10 results in $-600000000. I'd like it to look like $(600,000,000).
My data is as follows:
Month 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Number of Starts 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10
Rolling Number of Cases 10 20 30 40 50 60 70 80 90 100 110 120 120 120 120 120 120
In my dataset above the cases finish after 12 months (hence why there is a maximum number of cases).
What I am seeking is a method to count along a certain number of cells, then sum the contents of those. For example, I would like to count the contents of up to 12 cells, then sum those 12 cells.
Where it gets difficult is as follows:
- In month 6, I am just counting the contents of 6 cells (months 1-6)
- In month 12, I am counting the contents of 12 cells (months 1 -12)
- In month 18, I am counting the contents of 12 cells (month 7 - 18)
I need a formula, from which I need to drag (if needed) and to fill with numbers, by following principles:
- when the left cell contain the zero, it needs to find on the same column if there exists another zero, or another one and count them, let's say if find three zeros untill find number one, return 3.
- when find a number 1, after another 1, has to return a zero.
- the formula need to initialise from the top of the column, only finds the first number 1.
I have a relevant example down bellow. I used to count them visually and sometimes errors sneak into my spreadsheets.
I have a table like this.........
Item Code
Ice A
Ice A
Ice B
water D
water A
water C
water A
milk B
milk D
milk C
milk C
milk C
milk B
And I would like to count the number of each letter to look like........
_______ A B C D
Ice ___ 2 1 0 0
water _ 2 0 1 1
milk ___0 2 3 1
I am trying to calculate the number of months between two given dates.
The spreadsheet is basically about staff and their start and end dates.
For example start dates would be in colum A and end dates would be in column B (in dd/mm/yyyy format).
I am currently using the following formula:
=DATEDIF(A1,B1,"m")
It does return the correct results when the dates are the same e.g. start date = 01/01/2006 and end date = 01/04/2006 = 3 months.
BUT when I change the end date to 31/03/2006, it returns as 2 months.
Is there a way around this? I need a more accurate number of months (with no decimal places)
If I generate a random number in cell A1 ranging from 1 to 3. Can I count how many times the result is equal to 2 if I was to run it 100 times and then show the results in cell A3.
View 9 Replies View RelatedI have an excel list with 3 columns (date, comment, cost):
I'm continously adding new entries to the list and want to see the average cost per month without remembering how many different months I already entered.
For this I need the number of months extraced from the date-column so I can devide the cost total by the numer of months.
The date format is dd.mm.yy
I want to have the number of used columns in a worksheet. The information will be used to understand what range the data is in. So for the rows I am using nRows = Application.WorksheetFunction.CountA(myRange). I am hoping to have something similar for the columns.
View 6 Replies View RelatedI have excel sheets with 71936 rows of data collected ~30 times a second for 40 minutes during and driving simulator drive (for 51 participants! all in separate worksheets). The output I get from the simulator includes speed, lane position etc. I've been averaging the data out into minute blocks for most variables, but what I really need to know is: if they exit the "lane" for more than 3 seconds, and if so, how many times they exit the lane in each minute.
Column A is the minute, column B is their lane position. Lane position ranges from -540 to 540. The middle of the left hand lane is -180 (the left hand lane ranges from -360 to 0 - we drive on the left in Australia). If they exit the left hand side of the lane, the lane position value will be between -360 and-540, and if they exit the right hand side the lane position value is 0 or greater.
A formula in a new column that can give a "1" each time they exit the lane for more than 3 seconds would be great, then I think I can make it sum how many times they do it in each minute.
I would like to count the number of instances of different schedules shows in one department. For example for dept. 1, I would like to know how many different schedules are in that dept. I have 48 schedules and 60 departments (numbered 1-60). I would like to know how many "different schedules" dept 1 has and so on. I don't think the frequency function will work. Is there a way I can use sumproduct to get the result I'm looking for? The information is on a separate worksheet in colums (Col. A holds the dept and Col. B holds the relative schedule).
View 9 Replies View RelatedI have a spreadsheet with column B being the date when a staff joined the company; column C being the date when the staff left the company. If I want to set a formular in column D to calculate just the number of month had a staff been working in the company, how should I set?
e.g any day joined in Aug 05 and left in Sep 05 will be counted as 1 month
1/1/2007
1/1/2007
1/2/2007
1/2/2007
1/2/2007
1/30/2007
1/30/2007
1/31/2007
1/31/2007
1/31/2007
1/31/2007
2/1/2007
2/2/2007
2/2/2007
2/2/2007
2/28/2007
2/28/2007
2/28/2007
2/28/2007
2/28/2007
This list goes on with every workday of the month repeat several times, with no day have any set number of entries. Also each new month is just tacked on to the previous list. All of this is in column A but there are many other columns of data with these dates. I just didn't see the need to replicate that here.
What I need is to be able to count the number of unique days per each month but I do not want to have to specify a range for the month of January, then another range for February, etc. I just want to be able to list the column A4:A1200 and have the formula select just the unique days for January. Then in another cell modify the formula for unique days in February and so on.
I'm trying to formulate something that will count how many times say 5 comes up in a =randbetween(1,20) function. Of course if I do =(IF(A1=5,1,"") it will count it, but once the randbetween recalculates it will reset. Is there any way to do this so it keeps a cumulative count?
View 9 Replies View RelatedProbably missing something obvious here but I'm trying to determine the number of different results in column B where the citeria in column A is the same. For example, for the attached table the result for V00013 would be 4.
View 5 Replies View RelatedI am looking for a way to add the 123 plus 456 to get 579. I have had some ideas that almost work, but I cannot get rid of the ' .
View 11 Replies View RelatedI have collumn with different dates. I would like to count number of date with specific month in them (for example "june"). I tried it with if function, but something is missing.
Example of data:
1.6.2012
3.6.2012
9.6.2012
30.6.2012
[Code]...
My function: =SUMPRODUCT(IF(A1:A9;IF(MONTH(A1:A9)=6;1;0))) what shoud I correct or of better function?