I have been trying to take a variant array that has 6 columns, output it to a new worksheet (although I would prefer to just sort the array but can't get that working - how I can do this please feel free), sort the worksheet by 2 different columns, and then move these values back into the original array. I think I have the dumping and sorting down but I can't figure out the putting back into the array part. Here is the code I have thus far. varRecords is the array I am dumping to the new worksheet.
I am making a spreadsheet that sorts and pastes, but I need to know if I can add a code to the Sort and Paste Macro that will open the second spread sheet needed without just already having it open and using the
I have a sort function in one of my macro. Sometimes it works, sometimes it does not. I can't figure out why. I am trying to sort columns A-F and each column has a header.
I recorded this macro - which was a simple copy and paste and then sort the results, however it works in excel 2007 and not in 2003. Even tried to record the same in excel 2003 and it still does not work. It seems to fail at the sorting stage
Sub sortprices() Sheets("Rates").Select Range("B229:C241").Select Selection.Copy Sheets("Results").Select Range("C4").Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False Application.CutCopyMode = False ActiveWorkbook.Worksheets("Results").Sort.SortFields.Clear ActiveWorkbook.Worksheets("Results").Sort.SortFields.Add Key:=Range("D4:D16") _ , SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal With ActiveWorkbook.Worksheets("Results").Sort .SetRange Range("C4:D16") . Header = xlGuess .MatchCase = False .Orientation = xlTopToBottom .SortMethod = xlPinYin .Apply End With Range("C4").Select End Sub
I have a column which has dates in format: dd/mm/yyyy - there are no headers in this worksheet.
I need to sort the worksheet according to the row date field ... but it's causing issues.
It is assuming the dd is mm ... and when i reverse the format to yyyy/mm/dd before sorting - then it assumes mm is mm BUT it keep sorting with dd, regardless of the month. with both ways, the assumptions are interchangeable ...
I have a spreadsheet to create with columns A-I, this will be used by others when I am away and the problem is I dont want them to have to keep going into the data-sort option. Is there a way that I can get the items to auto sort into alphetical and numerical order across the columns? Personally I would be happy with sorting the columns manually each time it's accessed but I know the others using the program won't be!! How would it work if its poss? would it auto sort on saving?
I have a worksheet that is automatically updated based on actions in other sheets. There are 10 columns of data (A-J) Headings are on row 6 and data starts on row 8. I have created 3 buttons to sort worksheet by client column (B), year-end column (E) and to bring it to original order (by numbers in column A). I have created the following codes that I have assigned to each button however it does not work.
Sub Macroclient() Columns("A:J").Sort Key1:=Range("B8"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom End Sub
I am copying and pasting from two different " timesheet" spreadsheets into a list. One of the timesheets has blank rows. I am attempting to sort the blank rows to the bottom after I paste the data, but every time I do, it either replaces the top row with "true" or deletes the headers,
Sub SortBlankRows() Dim rngCurrent As Range Dim c As Range Dim inUsedRow As Integer Set rngCurrent = Workbooks("Payroll Summary.xls").Worksheets(1).Range("A1:J1") inUsedRow = Workbooks("Payroll Summary.xls").Worksheets(1).Range("D65536").End(xlUp).Row rngCurrent = rngCurrent.Resize(inUsedRow) rngCurrent.Select Selection.Sort Key1:=Range("D1"), Order1:=xlAscending, Key2:=Range("F1") _ , Order2:=xlAscending, Header:=xlNo, OrderCustom:=1, MatchCase:= _ False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, DataOption2 _ :=xlSortNormal End Sub
I need this for VB code, for an array that is the product of another macro hence it's dynamic.
B 3 E 2 E 8 D 2 B 1 B 7 How do I subtotal Col A,B according to Col A? Total 3 B entries with a subtotal of 11 Total 2 E entries with a subtotal of 10 Total 1 D entry with a subtotal of 2
I have created an array in Excel VBA 2003 and successfully loaded it with values. The array variable is called "Week". I am currently getting the sum of the numbers in the array by creating a dim variable that adds them statically one at a time:
Dim finalvalue As Integer finalvalue = week(1) + week(2) + week(3)
That works, except as time goes on there are more weeks and I need to dynamically add all the values together in one fell swoop.
I'm writing a macro that will pull a set of dates from a worksheet and put them into an array. Then I want to find the max date in the array (most likely using some sort of sorting method).
The code below is how I'm putting the dates into an array. I'm not sure if using the date data type is best. I can't tell how it will sort the information. Is there an easy way to find the maximum of an array of dates?
Dim Date_Array() As Date If Sheets("Sheet1"). Range("N" & i) = "Date" Then j = j + 1 Redim Preserve Date_Array(j)
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
16 17 18 19 20
21 22 23 24 25
Code: Sub populate() Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
Excel file. The file has two tabs: 'Input' and 'Master'. The 'Input' tab is for users to input any new records, and the 'Master' tab is to retrieve data from the 'Input' tab. Given that some users may want to insert a row in between (rather than add at the bottom).
I used arrays in the 'Master' tab such as:
={IF(ISERROR(1/Input!E2:E250),"",Input!E2:E250)}
Now there came the problem: in the 'Master' tab, the data cannot be sorted when the arrays are used. Otherwise, there is a warning message: You cannot change part of an array.
On from a solution I am using in the sheet which uses very well an Array Formula.
In the attached book I have a sheet with a bunch of tables called Site Table. In the sheet called Working Sheet I want to get the text Site Names and list them in Column A. Sorted would be nice not required but I can't think of way to avoid blanck rows without a manual sort. I tried many versions of Find without a solution as well.
I am trying sort a bunch of different ranges. So I am trying to use the same sort code but run an array of ranges through. This code is for only two ranges CA3:CD200 and CF3:CI200. I want to pass the ranges as variables through the sort code but I cannot get it to work.
1. The following is the VBA version of what i've been using:
Range("A1:J1000").Sort Key1:=Range("D2"), Order1:=xlAscending, Key2:= _ Range("E2"), Order2:=xlAscending, Key3:=Range("F2"), Order3:=xlDescending _ , Header:=xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:= _ xlTopToBottom, DataOption1:=xlSortNormal, DataOption2:=xlSortNormal, _ DataOption3:=xlSortNormal now arrays are bigger than 1000 rows>> even bigger than 65536.
Such an array is stored in "arrBIG" and dimed as (1 to 10, 1 to 100000). The goal is to sort it by the 4'th, then 5th then 6th values in the first dimension - the one that is 1 to 10 - i call this the column.
I have a string (PreString) that gets its values from a procedure call (PreResult). The string consists of 4 values for each loop which I then split into the y array.
I then want to transpose the array to the worksheet for sorting.
I don't really get the transpose to work as I want to. I want every 4:th y to be printed on a new row (x). I don't really know how to use the Ubound function to get it right.
Should I make a 2 dimensional array instead ? If so, how is that made ?
Dim x As Integer, z As Integer Dim var_Status As Integer Dim var_Week As String Dim var_HoursPerWeek As Integer Dim PreString As String
i = var_StartWeekNr j = var_RangeNumberOfWeeks z = 0 x = 0 var_Status = 0 var_Week = "" var_HoursPerWeek = 0 PreString = ""
I have a string that I need to sort. Below code works beautifully but doesn't sort numbers, any advice to get this to sort numbers as well?
Function Alphabetize(ByVal sText As String) As String Dim sWords() As String, sTemp As String Dim i As Long, j As Long, n As Long
'-- clean up text For i = 1 To Len(sText) Select Case Mid$(sText, i, 1) Case " ", "a" To "z", "A" To "Z" Case Else: Mid$(sText, i, 1) = " " End Select Next '-- remove leading and trailing spaces....................
I have a dynamic number of rows each with three colums of values. These varaibles I want to fill an array with but I don't know how.
Now I've just "concated" these three variables into a string and then I intend to split the string into rows by the third comma. (see below)
I think it's easier though to use an array and I really appreciate some assistance. Please tell me also the best way to sort the array. It will be sorted by var_Status which is an integer. (sort order: max positive to max minimum)
Im looking for an algorithm to sort an array of data, deleting multiple values whithin the array and shifting the values down the array to leave no gaps. the crude set of loops i am currently using is:
For f = 0 To 100 For g = f + 1 To 100 If LineArray(g) = LineArray(f) Then LineArray(g) = "" Next g Next f
which does work and serves my purpose but is messy as it leaves blank gaps in the array.
I am looking for a macro to sort my colums in ascending order the range i need sorted is from A7:F107, it will be sorted with the numbers in the A column ie 1 - 107. sometimes different numbers get added and it has to be sorted in number sequence.
If possible i would also like a macro to protect this range after the sort,
How can I sort an array of data based on the selection from a drop-down menu? And can it be 'secondary' sorted with the result from a second drop-down (ascending or descending is unimportant)?
I havet he following code which sorts data. If there is no data to sort I keep on getting a run time error. Could I add something to my code to prevent the run-time error, as sometime there won't be any data to sort. The code runs when I switch to the worksheet in question.
Sub SortMeetings() Dim iCTR As Integer Dim yCTR As Integer Dim zCTR As Integer
zCTR = 11 For iCTR = 12 To 23 For yCTR = 1 To 10 If Len(Range("D" & iCTR).Offset(0, yCTR)) 0 Then Range("AA" & zCTR).Value = Format(Range("D" & iCTR).Offset(0, yCTR), "HH:MM") & " " & Range("D" & iCTR).Value zCTR = zCTR + 1 End If Next yCTR Next iCTR Range("AA11:AA" & zCTR).Select Selection.Sort Key1:=Range("AA11"), Order1:=xlAscending, Header:=xlGuess, _ OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _ DataOption1:=xlSortNormal End Sub
In the attached example file, I have two tabs: options and sets. The options tab is to be populated from a form. The sets tab is to draw data from the options tab to create teaching sets. I have managed to create an array formula that does this for me, but what I would like it to do is sort my resulting list alphabetically. For reasons that I won't go into, I need the data on the sets tab to remain in three columns: First Name, Surname and Form.
This is the array formula I am using at the moment: AliGW - Example.xlsx
I have two lists in different columns, which are defined ranges. I want to extract them to a unique list with an array formula and at the same time sort albafetically, without duplicates, like this:
List1 List2
Final List
Audi Ford
[Code] ....
So far, I have this formula which is working in what concerns removing duplicates and exctract a unique list. But it is not ordering alfabeticaly.
