I'm using the VBA code below for a piece of code.
[Code] .....
However, I want to use this same function in another place, without the limit set on the cells that will be cleared.
What I would like to do is send the formula the cell to start at (E14), offset that by one column, and then send a number of rows. With that, create the range to be cleared.
Something like:
[Code] .....
In 1 cell i need a forumla to give me a starting number and take one away each time a code or codes are dislayed in a cell range. Something like this
A1 = 23 days or any number days i needed
Cell range B1:C52
every time a selected 1 or 2 letter code appears in the cell range i want A1 to subtract 1 day from the starting number, i would need it to subtract half a day if one code appears ie HD, the codes may be P, OT, HD
How can I create a sequence with a formula starting in A1 that will give 1,1,2,2,3,3 and so on horizontally?
View 3 Replies View RelatedI'm trying to sum a range of data consisting of 12 cells (each range is in a unique row going across adjacent columns). The range of data to be summed is based on a lookup value which is a column header - I want the range to start with this lookup value. In column B of my spreadsheet, I have a 'First Activity number code' going down...In Row 4, I have the same First Activity Codes going across the row (the column headers). In Column U, going down the column I am looking for my formula.
So For example, in row 5 of my spreadsheet, I am looking at 73 as my base code (the value in column B), and I want a range of data summed that lies in the same row where the column headers are 73 - 84 (12 rows) - always starting summing the range with the same number that is in column B. So in row 18, 78 is my base number; so I would want the sum of the numbers in the same row where the column headers are 78-89 ( 12 columns).
I have the following data set with about 500 rows. It has one large value in column A, followed by a number between 1 and 24 in column B.
I am trying in Excel 2013 to develop a formula that will: divide A by the value in cell BPlace in cell C, D, E, F... the result of this division, where the number of times the value is repeated depends on the value in B. E.g.
Example of source values/data set:
A
B
18504
18
2011
2
23694
24
(about 500 rows more)
An example of the output result that I am looking for:
A
B
C
D
E
2011
2
1,005.5
1,005.5
In above example, the value in column B is 2, so the result of the division of value A with value B is repeated twice. In case value B would be 18, the value would be repeated 18 times...
I have been trying to do this in Excel for more than 2 hours, but I did not manage to complete it.
I found dynamic range name across columns:
=OFFSET($A$1,0,0, COUNTA($A:$A),COUNTA($1:$1))
which expands across Columns in Row 1.
What if we don’t know range to be named in which row or column starts?
What will be a formula (assume range starts on cell named “BegRng”)?
I have a macro that is copying information from one spreadsheet into columns "A through E" on the next available row in a seperate spreadsheet. Beginning with column "G through L" I need to copy the formulas from the row above in the same spreadsheet. Is there a way to do that since the row being copied from will change each time?
View 4 Replies View RelatedI have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.
Data Tab
001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
[|Code]...
So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.
I think that I have explained what I need to do
I am working on a macro and, as part of it, I would like to look at column A of my spreadsheet and remove all cell contents where the text in the cell does not start with the word "total." For instance, if the text of a cell in column H is "total money" I would like it to remain unchanged. However, if the text of a cell is "George Baker" I would like it removed. I ONLY want the text in column H to be considered ... no other column.
View 3 Replies View RelatedOk, basically C3 is a dollar amount. The default total for C3 is $0.00. If C3 is $0.00 then this formula cell will display a blank cell. If there is any other amount in C3 then the formula C3-C2 will run.
I tried this but it's not working:
=IF(C3="0","",C3-C2)
I am looking to get a formula based on my spreadsheet attached
I want F collumn to add 5 days onto whatever date you put in there then correspond it to the matched date period in I2-I6 then apply the pay period from H2-H6 and put it in the G Collumn next to the date that has been input?
I need to change multiple conditional formats which apply to cell ranges 1 row x 17 columns wide. The specific change I am making is able to be acrried out with the code
With Selection.FormatConditions(1).Font
.ColorIndex = xlAutomatic
End With
However, I dont want the user to have to manually select each 17 cell area. I WANT THE USER TO JUST MANUALLY SELECT THE FIRST OF THE 17 CELL AREA. I want to write a macro that will THEN select a row of cells, 17 cells long, from the MANUALLY SELECTED position as at the moment of running the macro. Unfortunately the cells are not always on the same row in each sheet. On one sheet they may be on row 5, on another row 8 and on another, row 15 etc. I was wanting to be able to select a 17 cell range 'relative' to where the cursor is. How do I write the code to select the relative cell range? Is there an answer in an R[1]C[1]:R[1]C[17] sort of code?
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
I have a spreadsheet that will monitor payment schedules, in which both payment frequency and the payment start date are inputted by the user.
As such, to make filling out the column(s) fool-proof, I want to grey out cells in which data should not be entered.
For example, if the payment frequency is every 6th day, and the payments are to begin on day 0, then days 0, 6, 12 (etc) should be left white, whereas the remainder of the cells should be shaded.
I can achieve this using multiple conditional formatting rules in excel2007 with iterations of formulae of the type:
I have a list of headings and items and I have a set of formulas that work out depending on the heading what items are listed.
Say theres 10 items and the heading starts at C4 and that heading has 10 items, so it puts "C5" as text in G1 and "C15" as text in G2 so i now know my cell range of items
How can i use the text in those cells to put in a formula to call that as a range?
If I use the indirect formula it shows me the value of the cell, but im after using it to reference the cell
I need to accomplish selecting a range using variables for the starting cell and ending cell rows and columns.
Pseudo code (how I'd like the syntax to be, but isn't):
Worksheets(mysheet).range(startCellRow, startCellCol : endCellRow,endCellCol).Select
With Selection
...
End With
I am trying to create an active cell formula based of variables from given cells.
With ActiveCell.FormulaR1C1 = "=CONCATENATE(""RU"",RC[-12],RC[-11],RC[-10],RC[-9])-CONCATENATE(""MU"",RC[-12],RC[-11],RC[-10],RC[-9])"
ActiveCell.Formula = ActiveCell.Value
But This does nothing.
I have a string of letters in cell column L20 through L3019.
The letters are A, B, C, and R . No other letters.
I wanted to find out if it is possible to remove any duplicates when starting in cell L20 going downward.
For example:
L20 = B
L21 = A
L22 = A
L23 = B
L24 = C
L25 = C
L26 = C
L27 = C
L28 = B
L29 = R
L30 = A
L31 = C
L32 = C
L33 = C
L34 = R
L35 = R
L36 = B
L37 = B
In the range L20 through L37 all the letters have appeared so my goal is to create a formula where the outcome is BACR. Starting with the first letter B in cell L20
Cell range L20 through L37. Looking for the next letter which would be either A,C, or R. Since we already used the letter B. In this case it's the letter A
ABCR
Cell range L20 through L37. Looking for the next letter which is the C or R. In this case it's the letter C
CBRA
Finally range L20 through L37. Looking for the letter R which is in cell L29.
RACB
I'm needing a formula that will determine the number of days that fall in a specific month based on a date range. For example, if I have a date range of 10/15/2009 to 01/13/2009, I need the formula to determine the number of days in each month within the range (October has 15 days in the date range; November has 30, December has 31, and January has 13.) I have a large spreadsheet that would be so much easier to manage with such a formula. Currently, my spreadsheet is setup as follows. I need the forumla automatically fill in the number of days under each month.
Stard Date End Date Oct-09 Nov-09 Jan-10 Feb-10
10/15/2009 01/13/2009
I'm using Excel 2007.
I would like to create a vba script when ran an input.box comes up and asks you to "enter number you want to start numbering from" and when the number is entered in the input box. e.g "7654", excel starts numbering each cell in column A from 7654 until there is an empty cell in column B.
View 7 Replies View RelatedI can't seem to make SumIF or Vlookup do what I want here.
I have a table like that below. I also have a cell on the same sheet called CurrentPeriod in which a user can enter a period number corresponding with one of the values in the first column.
If someone enters 3 in "CurrentPeriod" I want to sum the first three values in the "Actual" column and then divide the result by the sum of the first three values in the "Target" column (effectively giving a percentage of target at the end of period 3)
Period Target Actual %Target
1 74 68 91.9%
2 81 71 87.7%
3 76 87 114.5%
4 76 68 89.5%
5 71 89 125.4%
6 69 81 117.4%
I am trying to create a table, based on what people predict in sports games. I have most of it in place, but I have hit a brick wall where one part of it is concerned. For example, cells M43:M56 have the scores for each week of what one person predicted., so it could be 2,5,7,2 and so on. What I then need the table to do is determine which round or week it is and display the relevant score. So based on the above let's say it's round 3, and his score would be 7 for the week, and the cell to the right of this shows the week's score plus his total score so far.
View 2 Replies View RelatedThis is a spreadsheet for a real estate office. The boss gave me a spreadsheet that he created to give a seller an idea how much money he will walk away with at closing. The spreadsheet includes all of the pertinate numbers but there is one item that he would like to have filled in automatically. When selling a house, you use a title service that charges a fee based on the price of the house. So, for example, If the house sells for $0 to $50,000, then let's say the fee is $112. If the house sells for $50,000 to $60,000, then the fee is $118. If the house sells for $60,000 to $70,000, then the fee is $125, and so on up to 1.5 million.
The boss' spreadsheet includes 5 different selling price scenarios, which I guess doesn't matter since you do the first one and the rest follow the same pattern.
So how do I automatically fill in a cell based on how one number falls within a range of other numbers? The fee schedule will be within the same spreadsheet, if that matters.
Ideally, I think they should be separate files, but this will be used in various locations as different realtors take it home or use it on their laptops.
So I have 2 sheets from a much larger worksheet where I wish for the first sheet to extract a row of values, one at a time from the second sheet using a range of numbers I enter as reference for where to look for the data. Sheet 1 can be thought of as a summary page and Sheet 2 is where data is stored.
I need to first check if any data under Sheet 2 column B fall within a specified range of numbers and if any of those numbers are found I want it to grab the largest and latest number from that range and pull all the data from certain columns in that same row and place it into Sheet 1, one column value at a time.
Sheet 1 A1 = A range of numbers as text. 10-15, 16-20 etc Only one range is entered. This also tells me what results I'm looking at.
Sheet 1 B4:B14 = Destination cells for the individual data I'm wanting to pull from Sheet 2 columns H:P. B4 wants H, B5 wants I, B6 wants J etc
Sheet 2 column A = A3:A102 are numbered 1:100.
Sheet 2 column B = A series of numbers anywhere from 10-70. Always in sequence and they can repeat. 10,10,11,12,13,14,15,15,15,16 etc. Ranges from B3:B102. Only one number per cell.
Sheet 2 columns H:P = Data in H3:P102 I want to extract to Sheet 1 B4:B14.
Now lets say I want a formula for Sheet 1 B4 which wants a value in Sheet 2 H. If Sheet 1 A1 = 10-15, I want to check whether Sheet 2 column B has any values equaling those and then tell me which row that last number appeared in.
Example: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5. (B6 is outside range and B4 isn't the last time the 14 appears.)
Then, knowing B5 is the value I want, find which row it is in (row 5 in this example) or use the number in A5 (3) and then find my way to column H (H5) where the value I want to pull is.
Example 2: Sheet 2 B4=14, Sheet 2 B5=14, Sheet 2 B6=16. Use B5.
Sheet 2 H4=10, Sheet 2 H5=32, Sheet 2 H6=42. Place "32" from H5 into Sheet 1 B4.
I'd like to also have some error control so I'm not trying to pull data from blank cells if it's relevant. Maybe check if Sheet 2 X3=0 and if it is, do nothing as no data appears if the cell is 0.
I have put a lot of time into trying to solve this myself but I feel way out of my depth. I've tried going step by step but I can't seem to figure out which functions are relevant and also things like how to return the range that the A1 values appear in or if using MAX, not having it return values outside of A1's range also.
i wanted to create a macro that will autofilter my starting dates in I to the newest date entered. So ive recorded the macro: ....
View 9 Replies View RelatedPlease see attached sample worksheet. Column A will be generated by the user manually.
I'm looking for a way in VBA to have A1:D20 in Sheet2 copied and pasted in the "Bank Reconciliation" Sheet based on how many "Markets" there are in Column A. Then, once that's complete to have A22:D30 (the smaller box in Sheet2) copied and pasted directly below those results.
I have what the macro would hopefully generate to the right in "Bank Reconciliation" (B6:E54) as an example. So if there's a market in A1, copy and paste the box to B6. If there's a market in A2, copy and paste the box directly below the first (B26) etc. etc. until it's done, then paste the smaller box directly below whatever the macro generates.
Book2.xlsx‎
Here is what I would like to do: Have a formula like Max(B12:B14) change to Max(B12:B18) when I change the value in different cell from 3 to 7. I would like to stay away from the macro world and keep in formula world if that is possible.
View 6 Replies View RelatedI need to number some rows starting at row 5. Need to place the number in column AB of each row.
Needs to quit numbering at last record (column F will have information in the last record)
i need this to be a macro, never done an autonumber macro before....
Im trying to come up with a password that changes daily that contains 2 constant numbers and some multiplication:
The formual would need to be like a string for example:
1 (the day * a number) 2 (the month * a number)
The numbers 1 and 2 are always the same.
I have a spreadsheet that has the month (number) in one cell.
The days are in columns A1 - A31
Everytime i try to do this in Excel, it trys to multiply every number.
Not something I've ever had to do before as i generally work with data sheets, i'm creating a document to print but need the page number to start from a set value and not default "1" of "10" etc,
I need it to start from say "5" of "15" rather than the "1" of "10",
Its simple to do in Word, but like i say not something I've ever had to think about in Excel.