Create A New Worksheet By Copying Another Tab With All The Codes
May 5, 2014
I am attempting to write a small code for the following scenario.I have a workbook with worksheets GP1, GP2, GP3 etc & a template page as the last tab.
All the worksheets column names are same but have different data.Last worksheet is the template for all of them. How do I create a command button in template page... upon clicking the button,
it should create a tab just before the template worksheet incrementing previous tab GP3 +1-> GP4. GP4 should be a copy of the template page along with all the vb codes associated with the template page.So tabs looks like=> GP1, GP2, GP3, GP4, template
View 5 Replies
ADVERTISEMENT
Dec 28, 2008
I get a ledger dump every month with 20,000 lines of all transactions. There are 1,200 ledger codes, ten departments, and thirty activities. Each of the 20,000 lines has columns with the ledger code, a department, an activity, and other data. There are tens of thousands of possible combinations of ledger code, department and activity.
I have most of the ones which are commonly used every month, and I use them to create a =sumif summary which totals all the same concatenations of ledger code&department&activity. However, every now and again a new permutation arrives and I need to find it and then create the new concatenation for the =sumif to use in the summary. Is there any way to do this by running a routine which will locate the new combination and create the concatenation in the =sumif summary?
View 5 Replies
View Related
Oct 15, 2008
my w/s has a column for codes and then currency columns. Users may select codes from a list of over 600 codes. I need to enter a formula that subtotals by each code used.
table looks like this:
CODE 1Q$ 2Q$ 3Q$ 4Q$ SUBTOTAL ADJ ADJ ADJ TOTAL
8810 10000 10000 10000 10000 40000 50000 45000
8910 10000 10000 10000 10000 40000 50000 45000
8810 10000 10000 10000 10000 40000 50000 45000
8811 10000 10000 10000 10000 40000 50000 45000
so in this example I need subtotals for 8810, 8910 & 8811
not sure if I need to use a pivot table, an array formula or if statement.
View 9 Replies
View Related
Apr 5, 2009
combining two worksheet change codes. I have the following
View 4 Replies
View Related
May 18, 2006
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
View 9 Replies
View Related
May 5, 2006
I'm trying to convert various codes from one column of an excel spreadsheet into different codes in another column. I was able to accomplish this with "If" statements, however I'm only able to string together seven of these statements in one command. Is there a better way to add formulas for more than seven conversions? Below is a copy of what I've done so far with the seven converts:
=IF(ISNUMBER(SEARCH("WARN",J2)),"Warning",IF(ISNUMBER(SEARCH("PSSNAP",N2)),"Sales",IF(ISNUMBER(SEARCH("WARN",L2)),"Warning",IF(ISNUMBER(SEARCH("2699",L2)),"Warning",IF(ISNUMBER(SEARCH("4004",L2)),"Warning",IF(ISNUMBER(SEARCH("2036",L2)),"Warning",""))))))
I want to add about 15 more codes to convert within this formula but it's maxed out in the format I'm using.
View 3 Replies
View Related
Jan 6, 2009
There is an autofilter applied to worksheet A, I would like to transfer only the autofiltered range from worksheet A to worksheet B, a clear worksheet B statement would also help.
View 9 Replies
View Related
Apr 2, 2009
I've got a worksheet with five columns of data. One of the columns contains country codes. I have a list of countries that the codes relate to. I would like a new column in the worksheet that contains the country name. I'm not sure if this is possible, but it seem that most things are with VBA! The countries and their codes are on 'Sheet2' I relalise I might have to do some boring re-ordering of the data on 'Sheet2'
View 2 Replies
View Related
Jan 24, 2012
I was wondering if there was a way to create patterns when copying and pasting formulas?
For example, here is what I want to do right now:
=AVERAGE(Sheet1!I2:I650)
=AVERAGE(Sheet1!I2:I649)
=AVERAGE(Sheet1!I2:I648)
=AVERAGE(Sheet1!I2:I647)
=AVERAGE(Sheet1!I2:I646)
=AVERAGE(Sheet1!I2:I645)
=AVERAGE(Sheet1!I2:I644)
=AVERAGE(Sheet1!I2:I643)
=AVERAGE(Sheet1!I2:I642)
=AVERAGE(Sheet1!I2:I641)
=AVERAGE(Sheet1!I2:I640)
In other words, have a pattern in the formula?
Or something like this, but filling out cells horizontally.
=A1/A100
=A1/A99
=A1/A98
=A1/A97
=A1/A96
=A1/A95
etc...
Or:
=A1*A1
=A1*A2
=A1*A4
=A1*A8
=A1*A16
=A1*A32
=A1*A64
etc...
View 1 Replies
View Related
Feb 7, 2014
I need to reference the projected and actual expenses from the total on worksheet 'expenses' So i did so, however, if I change the drop down on the expenses worksheet to only display housing data, then the projected and actual expenses on my budget worksheet changes as well to the new data portrayed on the expenses worksheet.
I need to reference the cell, without it changing when I change the category display, but I need the cell to change accordingly if I enter new data in the overall tablet on the expenses worksheet.
Or do I need to create a seperate worksheet that has the data in and reference my cells on my budget worksheet to that new worksheet?
View 1 Replies
View Related
Feb 24, 2014
I have a workbook with two sheets the first one is called "SDL" contain master data for three TEAMS (TEAM.A, TEAM.B & TEAM.C") and the second worksheet is called "SDL_Calendar" for graphical chart view.
I need Macro to copy the relevant column data from "SDL" sheet and paste into appropriate column in "SDL_Calendar" sheet then make separate sheets for each "TEAM".
I have attached the work book of what I am trying to accomplish.
View 6 Replies
View Related
Sep 2, 2013
The new worksheet is created to the left of the existing source worksheet.
View 2 Replies
View Related
Jun 9, 2008
I have one worksheet from which i need to copy only few columns (Ex column A,B, D,G...need not be in sequence.....) to a new sheet.can you please help me to write a macro for this.In addition: Do we need to specify the number of rows in column or is there any way to get data till the end of column automatically.
View 9 Replies
View Related
Feb 11, 2009
I have code in a worksheet that creates a new worksheet when clicking a button:
View 3 Replies
View Related
Jan 11, 2010
I'm attempting to copy the contents of the first row in the "banking center" worksheet into the first rows of all the other worksheets in the workbook. Ideally, I'd like to select from A1 to the last column in row 1 to copy. Edit: Fixed a couple things but still having trouble with the copying section.
View 3 Replies
View Related
Oct 7, 2009
In Sheet1, I have this:
Nos. Items Enter Qty
1 Item1 5
2 Item2
3 Item3 20
4 Item4 50
5 Item5
6 Item6 3
etc...
What I want is, whenever I enter the quantity in Sheet1 it will copy the row in Sheet2, say it will start in row 5 without the blank row and it is something like this:
Sheet2
Nos.Items Enter Qty
1 Item1 5
3 Item3 20
4 Item4 50
6 Item6 3
etc...
View 9 Replies
View Related
Nov 1, 2009
I have 2 workbooks, one is called AllData.xls and the other is SavedData.xls. I want to be able to copy only the highlighted data from AllData.xls and automatically populate to SavedData.xls by using a button.
View 9 Replies
View Related
Feb 23, 2014
Excel Move-Copy Issue.pdf
I'm simply trying to copy a worksheet (from one location within a file) and place the copy elsewhere in the file. I continue to get an error message that looks like this: "A formula or sheet you want to move or copy contains the name 'Additional_Notes', which already exists in the destination worksheet. Do you want to use this version of the name? To use the name as defined in the destination sheet, click Yes. To rename the range referred to in the formula or worksheet, click No, and enter a new name in the Name Conflict dialog box."
The term above 'Additional_Notes' is just one of MANY references which (apparently) "already exist in the destination worksheet". I tried renaming the range as described above, and when I do, the above error message essentially re-appears, but this time the term 'Additional_Notes' is replaced with another bit of text. And so on. I am not able to copy the worksheet and place it elsewhere in the file without this error message cropping up. I've used the move/copy function thousands of times.
I am able to make a copy of the worksheet and move it into a new (blank) XLS file...but NO luck copying the worksheet and placing the copy in the same file...
View 1 Replies
View Related
Nov 18, 2008
I have a workbook with 2 worksheets. On sheet 1 (Roster) is a list of names; on sheet 2 (Summaries) is a set of calculations.
I want to create multiple copies of sheet 2 (Summaries) and name them according to the list of names on sheet 1 (Roster).
Creating and naming the worksheets appears to be working fine. The problem is that the worksheets that are added are blank, not copies of worksheet 2.
My code follows.
View 6 Replies
View Related
Mar 13, 2009
I’m building a data logger and all the info from data logger goes to sheet1 using serial port. I need to separate log1, log2, log3 to each individual sheet. Log1 must be copied to sheet2, Log2 must be copied to sheet3 and etc. The reason I need to separate Logs into different sheets so I can create charts for each Log automatically. Also I don’t know how big each log can be. Here is sample data what I’m getting to sheet1. I can change my datalogger to output text log1, log2, log3 to any numbers such as 9999 to make it easier. I need your help to be able sort out each data Log to each worksheet.
View 7 Replies
View Related
Oct 15, 2009
The format of the data shown in sheet below is divided by '|' where it represents a cell divider.
Sheet1
-------
A | B | C
ClassA | ClassB | ClassC
Sheet2
-------
A | B
ClassA | Student01
ClassA | Student02
ClassB | Student01
ClassC | Student02
ClassC | Student03
ClassC | Student04
Sheet3 - Final Output
-------
A | B | C
ClassA | ClassB | ClassC
Student01 | Student01 | Student02
Student02 | | Student03
| | Student04
Sheet3 = check if there is a match between Sheet1 and Sheet2, if there is, then use Sheet1 as a header (ClassA, ClassB, ClassC) and paste the matched data under the respective header.
View 11 Replies
View Related
Feb 29, 2012
I have an Excel file that has several worksheets. One of the worksheets is a letter and one is an envelope. Instead of typing the name address twice I need to have th name and address info repeated onto the envelope each time I use enter info in the letter. I know how to do this with a formula but not with a text.
View 1 Replies
View Related
Mar 30, 2013
Is there any code that can be written so when a person selects a tab to be moved to a new workbook, the macro code in the existing workbook would be copied to the new sheet? I'd also like to use a button that the user could click on for the macro.
View 3 Replies
View Related
Feb 22, 2008
I have a worksheet with some arbitrary selection - it may be 1 cell, a 5 by 4 rectangle, or even a noncontiguous splattering here and there on Sheet1. I want to select the identical cells on another sheet. So I'm thinking something like
dim sht1 as worksheet, sht2 as worksheet
'set them appropriately, then...
sht1.selection = sht2.selection
View 9 Replies
View Related
Feb 5, 2010
Basically, I have a worksheet of client info on a row by row basis.
Each client has a ref number (eg A4 is the ref for the first client. A5 the next, A6 the next etc etc)
I would like to know how to copy and paste each ref number into worksheet 'Proforma Template (2)' every 11 rows down, until the end of the client list is reached.
So, copy/paste value of cell A4 into 'Proforma Template (2)' cell E9, then A5 to 'Proforma Template (2)' E20 etc (every 11 rows)
(I've read up about various types of loops but not sure where to go with it)
Once I have this on a macro, I'll use vlookup to take the rest of the data across. (im more familiar with using vlookup so should be ok there)
View 9 Replies
View Related
Jun 15, 2006
I have a workbook containing a number worksheets. I need to copy one of these sheets and move it to a new workbook before copying and pasting the contents as values and saving as a new worksheet. Ideally the new workbook I'm creating would contain no other worksheets other than the one I'm copying in.
View 3 Replies
View Related
Aug 12, 2009
I am trying to copy the print settings(including the headers and footers) for one excel worksheet to another. I have found the following hint on internet and it works fine for copying the print setting(including the head/foot) but it is also grouping the worksheets. Click on the tab of the worksheet you want to copy. Then hold down the Shift or Ctrl key and click on the tab of the worksheet where you want the settings and click on File, Page Setup and OK. How can I just copy the print setting without grouping the worksheets?
View 4 Replies
View Related
Oct 19, 2009
I'm getting reports in an Excel file with more then 30 worksheets. All of them have the same structure. I would like to add them all in one single sheet and to place the source "sheet name" in the last column. All sheets have 12 columns with different number of rows (between 1 and 100). First row in each sheet is the header of the table.
View 4 Replies
View Related
Jan 9, 2009
I have 2 worksheets that share some of the same data. However I do not want to have to populate the same information twice. Instead I want to be able to type the information required in the one worksheet and create an instruction for the data that overlaps with the second worksheet to automatically load. The catch is I need it to find the next blank row every time to add the data. EG
Worksheet 1 has columns: Name, ID Number, Date, Gender
Worksheet 2 has columns Name ID Number.
I want to be able to input data on worksheet 1 only and the the Name and ID number will be added to the relevant columns in worksheet 2.
View 2 Replies
View Related
Jan 26, 2009
I have a spreadsheet with various details sorted by date and i am trying to create a macro that will run whenever the workbook is opened and search the column "Renewal Date" for a date between now and 3 months time. For all rows with a date that meet this criteria it will copy the relevant rows and paste them to a new worksheet with the header. The renewal date column could be added to so i need the macro to run until it meets an empty cell. I have attached an example workbook with cutdown data and my attempt at the macro.
View 4 Replies
View Related
