VBA - Copying Data From Another Sheet And Create Separate Sheets
Feb 24, 2014
I have a workbook with two sheets the first one is called "SDL" contain master data for three TEAMS (TEAM.A, TEAM.B & TEAM.C") and the second worksheet is called "SDL_Calendar" for graphical chart view.
I need Macro to copy the relevant column data from "SDL" sheet and paste into appropriate column in "SDL_Calendar" sheet then make separate sheets for each "TEAM".
I have attached the work book of what I am trying to accomplish.
View 6 Replies
ADVERTISEMENT
Jul 16, 2009
If the name in Column F of "Sheet1" is found in "DataPEs" in Column B, then copy the block of 6 cells of data below it in column Q to column D of "Sheet1" in their relative rows. Additionally, if column Q has data then copy it, if not then copy the data only in column M. Finally, the number of matching names will vary in Sheet1 but will stay mostly the same in the DataPEs sheet. I've highlighted one block of data in green as an example.
View 13 Replies
View Related
Mar 25, 2014
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
View 8 Replies
View Related
Jun 4, 2009
I have a workbook containing about 20 sheets. I need to find a way of pasting all the numbers in the A column in each sheet (sheets 1-20) to the last sheet so I get a great big list of all the numbers in the 20 sheets. How would I go about doing this?
Right now I'm cutting and pasting from sheet 1 to my last sheet, then from sheet 2 to my last sheet, then from sheet 3 to my last sheet... Is there a quicker way? The ranges in each of the sheets start at A2 and go down a few cells. Sheet 4 might have 4 numbers in the A column, sheet 12 might have 47, sheet 17 might have 8 and so on.
How would I go about getting all the A columns in the sheets to the last sheet?
I'll throw up a few screenshots if the problem is unclear
View 9 Replies
View Related
Jul 16, 2012
I have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL
ATL
ATL
ATL
CEN
CEN
JCK
JCK
etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
View 5 Replies
View Related
Feb 6, 2012
I have an master excel file with 20 sheets with names x,y,z,a,b,c,f,.... Each and every sheet has data which start from Row 7 and Column 2. Now i need to consolidate this data in one sheet in another excel file.
Consolidation should be like
Suppose X sheet has 20 rows and 4 columns of data which starts from Row 7 and Column 2, this data has to be copied and pasted in my new excel file copied on my desktop. Now first 20 rows are occupied in new excel file.
Now code should move on to master excel file Sheet Y which has 45 rows and 4 columns of data which starts from Row 7 and Column 2,this data has to be copied and pasted in my new excel file from row 21, which means Master excel file sheets has to be clubbed to one consolidated excel file.
In All the sheets in Master file Data starts from Row 7 and column 2.
Data range varies row wise in each sheet but column length is fixed to 4.
View 9 Replies
View Related
Feb 5, 2013
Copying data from multiple worksheets, but my problem is quite the reverse.
I have data for each month as a worksheet from 1970-2012. They are in a workbook with the recent years at first and the oldest years at the end/..
Like 2012Dec,2012Nov...............1970Feb,1970Jan
I would like to know how to write a macro to copy a range of data from Jan 1970 then add data from Feb 1970 and so on until Dec 2012.. The range remains the same throughout all the sheets.
I was able to do a rough code, but I am stuck doing the reverse part...
Code:
Sub ReverseList()
Dim Sht As Worksheet
For Each Sht In ActiveWorkbook.Worksheets
If Sht.Name "MEGA" Then
Sht.Select
Range("A:A").Insert
[Code] ..........
Also is it possible to restrict the range selection in each sheet based on the month and year?? For Ex. Accounting for leap year and 30 day months...
View 4 Replies
View Related
Feb 27, 2014
I have a code that will create separate sheets from “SDL_Calendar” sheet for each team and its working fine. Modify the code to create sheets for each Team BY YEAR based on user selection in Cells “H6”, “H7” and “H8” in “P6_Report” sheet. For filtering BY YEAR Column "D" Can be Used in “SDL_Calendar” sheet.
I have attached the work book of what I am trying to accomplish :
[Code] ......
CreateSheetsByYear_new.xlsm
View 14 Replies
View Related
Feb 22, 2013
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
View 4 Replies
View Related
May 25, 2014
i wanna copy C and D columns in Sheet1 and insert these 2 columns (copy + insert copy cells function, not copy + paste) to all other sheets except Infopage sheet
View 14 Replies
View Related
Dec 2, 2013
Macro for getting colored cells in specific range in a separate sheets in to one consolidated sheet.
Have attached an excel as a reference.. marked yellow and red.
View 9 Replies
View Related
Apr 28, 2014
I have a workbook with large number of sheets (150+). All sheets have the same column structure (same number of columns with same heading in Row 1), but the sheets vary in the number of rows.
I am looking for a VBA (Macro) that copy (combine) the same range (d2:g6 from each sheet) into a new sheet stacked.
View 4 Replies
View Related
Feb 10, 2012
I have a raw data worksheet with 54000 lines, in the format of six columns
In Column A is the USER Name
What I would like with if possible is code that will move the six columns of data from each individual USER into separate sheets, using Column A as the basis of the new sheets, ie the last row for each user is when the user name changes to the next one.
View 2 Replies
View Related
Mar 6, 2014
I'm currently using the following code (that I found online) to take a list of data and copy it to specific sheets based on the values in Column C (there are only 4 columns in my data set). The issue I have with it is that it's meant to create the sheets from scratch every time. What I could like, however, is for it to copy the data to preexisting tabs that are already named with the sames values that are found in Column C. This macro will actually perform that but the down side is it wipes out everything that's on those sheets but I cant have it do that. Is there a way to either modify this sheet so it only copies the four columns and only pastes the four columns onto the sheets?
Sub SplitData()
Const NameCol = "C"
Const HeaderRow = 2
[Code]....
View 5 Replies
View Related
Jun 9, 2014
In the attached sheet, i have data in 2 sheets in the same fromat. Both the sheets are seperate reports.
Coloumn A is the list of Team Ids, Coloumn B is the Ids of people who are assigned in the team. Sheet 2 also have the same details with changes in the people ID.
i am trying to find if the people IDs in report 1 is the same in report 2. i need a formula that will check if the people ID is matching to the same team ID as in report 1.. If its not the same, the formula should be able to show that.
eg :
In report 1, "197595" in coloumn B is against "4011-11341" in Coloumn A.
I need to check if "197595" is against "4011-11341" or some other number in report 2. If "197595" is not against "4011-11341" in report 2, it should show me " Miss match". if "197595" is is against "4011-11341" in report 2 as well, it should show me "match"Project match.xlsx
View 3 Replies
View Related
Oct 4, 2013
How to pull data based on column B to individual tabs.
I have the following data:
A B C D
Jane Doe | L1 | 20% | High
John Doe | L2 | 15% | Medium
Mike Smith | L1 | 60% | Low
Marie Smith | L4 | 10% | Low
I want to have the first tab/spreadsheet only pull records that have L1 values for column B
In the next tab/spreadsheet I want to pull records that have L2 values in column B etc.
What formula can I write that will pull all L1 records (A.B.C.D) in to Tab 1, then all L2 records (A,B,C,D) into the next tab?
View 10 Replies
View Related
Feb 25, 2014
Is it possible to have a single userform put data into two separate sheets within the same workbook.
I have a userform set up for entering client data into a quote register,with no problems ( sheet 1)
A1, A2, A3, A4, A5, A6, A7, A8, A9
What I would like is for the data to also go to sheet 2, where I have a form set up to print off for our technicians to take on site.
The problem will be that I would like the data A1, A2, A3, A4, A5, A6, A7, A8, A9 not to store on this sheet after it is printed, so the next set on entries , can be printed etc.etc
View 2 Replies
View Related
Mar 26, 2014
As part of report consolidation I need a Macro that can read through all the files in a particular location(Say a folder path) Pull the data for each unique products into separate sheet
In the example below : All the rows with "Chocolates to sheet 1" , Drink to Sheet 2 and so on Since the products in column 3 can vary the unique sheets need to be created at run time based on the source data
Workbook1
WEST
100
Chocolates
[Code]....
View 2 Replies
View Related
May 8, 2006
I am trying to use a macro to compare data from 2 sheets and spit out matching data in a third sheet. The first sheet has two columns of data. the second sheet has 4 columns of data. Only one column from sheet 1 and 1 column from sheet 2 will actually have matching data.
All other columns in sheet 1 and 2 are associated to the matching columns and must "tag along" into the 3rd sheet. I would love the third sheet to have a button that I just click and it populates the data.
The macro will be comparing between 50,000 and 500,000 items. Possibly a good book to use or even a referral for a proffesioanl or even some good heartedness,
View 5 Replies
View Related
Apr 1, 2014
I have tried a slew of different formulas but I can't seem to get the outcome I am looking for. I need to make a station comparison for an individual project build based off a master list. Sheet 1 has the individual build with column A as a part number, column b as a description and column c as a quantity required and column D is blank. Sheet 2 has a master list of every part we carry formatted as: column a as a part number, column b as a description, column c as a quantity required and column d as a unique station identifier for that part (which is always a number).
What I am trying to do is match the part number on Sheet 1 Column A to Sheet 2 Column A, and when a match is found, take the unique identifer under column D associated with that part number and have it displayed on Sheet 1 Column D.
Sheet 1 will change with each build, but it will always be the same format in columns a,b,c,d. Basically I have a format on sheet 1 for what is needed to build each custom kit (787 kits) and sheet 2 carries every part we offer along with the identifer in column d (always a number value). I want to create a formula I can easily copy to match the value in sheet 1 column a to sheet 2 column a and add the identifier from sheet 2 column D to sheet 1 column D. The average kit is roughly 120+ parts so doing that for each part 787 times will be a nightmare. Also in case this matters, sheet 1 column A will have the parts arranged in a random order based on what is desired for that kit. Sheet 2 column A has the part numbers in order from our lowest part number to the highest number (basically an entire inventory list sorted from lowest to highest).
Example
(For sheet 1, since it doesnt carry formating 11111111 is in column a, nut, flange is in column b, 1.00 is in column c and the output data i want would go into column D)
Sheet 1
A B C D
11111111Nut, Flange 1.00 *Starts blank* -looking for - Output from Sheet 2 Column D (1)
33333333Bolt, Squared 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (4)
55555555Bolt, Coated 3.00 *Starts blank* -looking for - Output from Sheet 2 Column D (2)
22222222Bolt, Hex 4.00 *Starts blank* -looking for - Output from Sheet 2 Column D (11)
44444444Bolt, Screw Type 2.00 *Starts blank* -looking for - Output from Sheet 2 Column D (3)
Sheet 2
A B C D
11111111Nut, Flange 1.00 1
22222222Bolt, Hex 4.00 11
33333333Bolt, Squared 4.00 4
44444444Bolt, Screw Type 2.00 3
55555555Bolt, Coated 3.00 2
View 1 Replies
View Related
Feb 28, 2014
i am trying to copy a data from another sheet, and i know to use "=sheetN!XM" but i have already renamed my other sheets, so i cant copy data from renamed cell using this command also by changing the command as the new sheet name...
View 3 Replies
View Related
Oct 14, 2008
i have 2 columns of data in multiple worksheets which i wish to copy into one column on another sheet.
i want to be able to click a button and have all the data compile with the item number and serial number into sheet "compile" no matter how many sheets i have (my current macro copys the sheets with a sheet prefix onto it, ive left 31 and 32 there) automatically. Ive edited compile with one sheet of data (note i just copied 31 to 32 - normally all data would be different, not a straight copy) to show what i am trying to achieve. the 17000 will stay the same no matter what, so i just used an IF function there. Basically the part im having issues understanding is how to copy data to the next blank space in the work book, as it wont always be full of data.
At the end of getting this part working i will set it up to automatically compile into a seperate work book as a csv comma delimited to upload to a database for stocktaking purposes - but i just want to get the basic copying working first.
View 9 Replies
View Related
Feb 20, 2009
I have two spreadsheets in the same workbook. Sheet1 contains statistics for teams and years. Sheet2 contains a listing of the teams in different orders.
How can I have excel copy a teams stats from Sheet1 to Sheet2 as it goes down the row? For example, A1 is atlanta 1996 so it copies a section of atlanta's 1996 stats to a specific range. Then A2 is detroit 2002 so it copies detroit's 2002 stats, and so on and so forth all the way down the list?
I am a beginner with VBA but I have experience with C/C++. I am just not sure of the functions for excel do all these things automatically and am having trouble finding applicable examples.
View 5 Replies
View Related
Apr 20, 2007
Given:
1.Four similar data worksheets (W1, W2, W3, W4).
2.Each worksheet has the same headings in row 1.
3.The data for each worksheet begins in column 2.
4.Each worksheet has an arbitrary different number of rows.
Problem:
What code allows you to automatically place the contents of all four data worksheets (W1, W2, W3, W4) into a different worksheet (w5) with only one common heading?
View 9 Replies
View Related
Mar 4, 2014
My boss requires me to prepare forms for vouchers that we release to our suppliers.
I encode the details manually to excel with his prescribed format. each voucher are encoded on separate sheets on one file.
Now he requires me to prepare a summary for all the voucher forms which is now becoming a pain since i now hold 50+ suppliers. and each day i encode about 120 vouchers.
I found through this forum that there is a way to automate tasks on excel like preparing a summary sheet.
View 3 Replies
View Related
Jun 17, 2013
I have a spreadsheet with 13 sheets. Sheets 1-12 are Jan - DEC and I would like to make the 13th sheet a totals sheet Year to date.
The totals sheet will update when I populate/update the fields in sheets 1 -12.
The sheets have names in column A.
The sheets have labeled columns in Row 1.
What I am trying to accomplish is something like "if BOB in A:A on sheets 1 - 12, sum (or average) column B on the same row as BOB for sheets 1-12 and add to sheet 13.
I know this doesn't work, but this is my thinking =SUM(JAN:!H2:H200, FEB!H2:H200, etc.) if A2:A200 is "EAXACT MATCH" to sheet 13 A:A
I want to be able to sort/filter/hide on different sheets at different times without affecting the totals sheet. do I need to use subtotal?
Tech
Total upgrades
Total Repairs
[Code].....
View 4 Replies
View Related
May 29, 2012
Is it possible to aggregate data in a pivot table from different categories?
I have excel 2003.
For PURE illustration, I have 6 columns, A-F, respectively:
"TV Show", 4 columns for names of people who watched the show (Persons 1, 2, 3, and/or 4), and finally, the duration / "Time" of the show.
I want to see in a final output:
Anytime a person has watched the show (whether i have penned him in columns 1, 2, 3 or 4), Excel to aggregate the total hours watched by that person.
When i try to do this with my pivot table i run into an error: if Person A watched "TV Show X" in row 1 and his name is in the Person 1 Column, Excel will not aggregate his TV time with "TV Show Y" in Row 2 when his name is in the Person 2 column.
It will sum up the categories separately even if the "Person" inputs in the separate "Person" columns are exact matches.
View 2 Replies
View Related
Dec 1, 2012
Im looking for a way to copy all rows with data in them from row 3 to the last row with data to another worksheet. I would like to copy the data from ALL worksheets in the workbook apart from one called Grade Boundaries.
All the sheets have the same layout. I simply want to produce a sheet with the data from all sheets in one place.
View 1 Replies
View Related
Sep 19, 2006
I have a mastersheet with all the information and I want to be able to copy it to new sheets.
The four different sheets I want are: Male-Olympic, Male-Sprint, Women-Olympic, Women-Sprint. Is there anyway to go through the sheet, copy the rows, and paste them into their proper sheet.
View 9 Replies
View Related
Mar 21, 2013
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
View 1 Replies
View Related
