I have a worksheet with some arbitrary selection - it may be 1 cell, a 5 by 4 rectangle, or even a noncontiguous splattering here and there on Sheet1. I want to select the identical cells on another sheet. So I'm thinking something like
dim sht1 as worksheet, sht2 as worksheet
'set them appropriately, then...
sht1.selection = sht2.selection
(Excel 2007). I have a report that I download which looks like this: The actual report has about 10000+ lines
I don't really want a macro for it but a formula that would copy the name in column A down in Column C but only to the point where the next name starts. So for example James Brown would be copied down in Column C till it reach Account Number 81914 and so on?
A B C
NameAccountJames Brown16836546259386014759716624957862380714557311623681914Steve Smith825168050422745213781459686708210378813700484308138459Holly Wood152663787051472924045442366165332455059500133525111211
I am using a form which has 3 text boxes and a list box. How do I copy the selection of a list box to the text box based on my active text box. So, if I was in text box1, and I click a selection in listbox1, it copies that selection to textbox 1, etc.
View 4 Replies View RelatedI would like to copy selected rows in a range D19:I49 to another sheet, by clicking a button to bring up a User Form containing a List Box, seven Option Buttons (one for each sheet), an OK and Cancel Button. When the User Form is displayed, the required rows are selected in the List Box, then the required sheet is selected via an Option Button. Upon clicking the OK button it pastes (only the values) to the selected sheet, but to the next empty row (if there is already data entered previously) in the same range as above (D19:I49). All seven sheets are identical and are named Monday, Tuesday, etc. to Sunday. If the option button selected is the same as the active sheet a message box could be displayed to ask the user to select another option button and upon clicking the OK button on the message box return the user to the User Form once again so that the correct option button may be selected.
View 2 Replies View RelatedI have a workbook consisting of 5 sheets.
Sheet 1 is the master sheet, and (among many other columns) it has a series of yes/no columns. The yes/no options are the equivalent of:
"Are you in sheet 2?"
"Are you in sheet 3?"
etc.
When this is the Yes option, I would like the rest of the contents of the row to copy into sheet 2.
These need to remain linked, so if I change stuff in Sheet 1 I would like it to change everywhere.
I am working on Excel document(Microsoft office-2007) with 2 sheets(Sheet1,Sheet2).
In sheet1 i have a dropdown list and the respective data is saved in Sheet2.On selection of dropdown lists in sheet1 ,respective rows should get copied from Sheet2 to Sheet1.
I am having trouble with the macro command. This is a first for me and I am stuck. I just dont know the how to write the Macro for this.
I need help with a macro for copying and pasting of cells. I believe this should not be a problem for the Excel VBA experts, but for someone who can only record macro, I'm really at a loss.
Attached is a sample file, where sheet 'Source' is an example of the sheet from which data are to be copied. The other sheet, sheet 'Final' is an example of the final format that I need. The reason I'm doing this is I'm planning to upload my data into Access and so I need to convert them into a list format.
List of target columns in sheet 'Final' and source cells in sheet 'Source':
Column A: Biz ID - not sure if I really need this, by right it should be listed automatically once I paste the data
Column B: B2 of 'Source'
Column C: B2 of 'Source'
Column D: B1 of 'Source'
Column E: row 6, relevant column
column F: column K
column G: row 5, relevant column
column H: the specific amount
So basically I'm creating an entry for every amount in the table.
There is an autofilter applied to worksheet A, I would like to transfer only the autofiltered range from worksheet A to worksheet B, a clear worksheet B statement would also help.
View 9 Replies View RelatedI have one worksheet from which i need to copy only few columns (Ex column A,B, D,G...need not be in sequence.....) to a new sheet.can you please help me to write a macro for this.In addition: Do we need to specify the number of rows in column or is there any way to get data till the end of column automatically.
I am trying to do the following...(pretty easy).
When the "Single DSC Summary" worksheet is selected, upon selection the activecell needs to be B7. In B7 is a validation list.
Once a selection is made in the validation list, the activecell should immediately be J7, which is an indirect validation list to B7.
I want to do this because everyone loves the idea of the validation list, but because you cant tell where the list is until you select the cell, they get confused. This way the activecell will always be the validation lists.
I have tried highlighting..bolding..even arrows pointing to the cell...and I still get calls.
The following macro will put a checkmark in the range of A2:B100. I would like to use the current macro along with two or more other Worksheet_SelectionChange. One of the SelectionChange to put "Williamson" in the range of L2:L100 and another SelectionChange to put "Michaelson" in the range of M2:M100? Is it possible to use more than one Worksheet_SelectionChange
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Const WS_RANGE As String = "A2:B100" '
I tried recording a macro but I am keep on getting an error. I need a macro which will print the selection of A1:D28 on a worksheet called Invoice. The print needs to be scaled at 165% of its normal size. i need it to be normal margins and if possible any printer.
View 1 Replies View RelatedI have a macro I'd like to run when a worksheet tab is selected. The macro updates content in various cells.
That action is now triggered with a command button (linked to macro), but I'd like it to take place when the user selects that worksheet tab.
I'm attempting to copy the contents of the first row in the "banking center" worksheet into the first rows of all the other worksheets in the workbook. Ideally, I'd like to select from A1 to the last column in row 1 to copy. Edit: Fixed a couple things but still having trouble with the copying section.
View 3 Replies View RelatedIn Sheet1, I have this:
Nos. Items Enter Qty
1 Item1 5
2 Item2
3 Item3 20
4 Item4 50
5 Item5
6 Item6 3
etc...
What I want is, whenever I enter the quantity in Sheet1 it will copy the row in Sheet2, say it will start in row 5 without the blank row and it is something like this:
Sheet2
Nos.Items Enter Qty
1 Item1 5
3 Item3 20
4 Item4 50
6 Item6 3
etc...
I have 2 workbooks, one is called AllData.xls and the other is SavedData.xls. I want to be able to copy only the highlighted data from AllData.xls and automatically populate to SavedData.xls by using a button.
View 9 Replies View RelatedI have an excel sheet where I can enter a text into A4, when this is valid a checkbox1 will appear if there is no value then the checkbox is invisible.
I have used a macro 'worksheet selection change' to do this but unfortunately I can only use this once in a sheet. I need to do this for upto 10 checkboxs that corrospond sequentially with text starting at A4 for checkbox1, A5 for checkbox2 etc....
The routine I have used for one check box is below. Can this be changed for multiple checkboxes?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Range("A4") = isblank Then
CheckBox1.Visible = False
Else
CheckBox1.Visible = True
End If
End Sub
Is there way to take the values of a listbox selection located on a Worksheet and call that value when I initialize a Userform?
Or, if not, is there a way to declare my listbox selection as a public variable that can be accessed from any module of my VBA project?
I am trying to enter the following formula into cells on a worksheet change event but it errors out.
formula to input is: "=IF(H$10="",($H$8/12*K$8),($H$8/12*K$8)+H$10)"
I have used the following format to do this: ....
I am using Excel 2007, and I have a macro (that is working) that I would like to run whenever there has been a new selection in a dropdown list on my worksheet. I have done this many times before in other workbooks, and I have always used:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
End Sub
To my knowledge this should trigger the macro when the dropdown selection changes. However, this time it is not working. The macro runs fine manually, but it does not run when the dropdown selection changes.
I am fairly new to Macros and such so please bare with me. I work with workbooks that have 30-50 worksheets in them. They are fairly complex and we send them out to our agents to use and need them protected so they cant change anything. I found how I can protect all the worksheets with one macro. There is one more part that I would like to add to this macro that I cant seem to find an answer for on these forums (Yes I have spent the better part of the day looking).
When you manually go to protect a page. It asks you to type in your password for the first time and below that there are a bunch of boxes that can be checked or unchecked. I need the first box "Select locked cells" to be unchecked. It is checked by default. Is there something I can add to my macro to uncheck this box?
This is the topic I used to create my Protect/Unprotect macro.
Macros to Protect/Unprotect Worksheets and Workbooks
Excel Move-Copy Issue.pdf
I'm simply trying to copy a worksheet (from one location within a file) and place the copy elsewhere in the file. I continue to get an error message that looks like this: "A formula or sheet you want to move or copy contains the name 'Additional_Notes', which already exists in the destination worksheet. Do you want to use this version of the name? To use the name as defined in the destination sheet, click Yes. To rename the range referred to in the formula or worksheet, click No, and enter a new name in the Name Conflict dialog box."
The term above 'Additional_Notes' is just one of MANY references which (apparently) "already exist in the destination worksheet". I tried renaming the range as described above, and when I do, the above error message essentially re-appears, but this time the term 'Additional_Notes' is replaced with another bit of text. And so on. I am not able to copy the worksheet and place it elsewhere in the file without this error message cropping up. I've used the move/copy function thousands of times.
I am able to make a copy of the worksheet and move it into a new (blank) XLS file...but NO luck copying the worksheet and placing the copy in the same file...
I have a workbook with 2 worksheets. On sheet 1 (Roster) is a list of names; on sheet 2 (Summaries) is a set of calculations.
I want to create multiple copies of sheet 2 (Summaries) and name them according to the list of names on sheet 1 (Roster).
Creating and naming the worksheets appears to be working fine. The problem is that the worksheets that are added are blank, not copies of worksheet 2.
My code follows.
I’m building a data logger and all the info from data logger goes to sheet1 using serial port. I need to separate log1, log2, log3 to each individual sheet. Log1 must be copied to sheet2, Log2 must be copied to sheet3 and etc. The reason I need to separate Logs into different sheets so I can create charts for each Log automatically. Also I don’t know how big each log can be. Here is sample data what I’m getting to sheet1. I can change my datalogger to output text log1, log2, log3 to any numbers such as 9999 to make it easier. I need your help to be able sort out each data Log to each worksheet.
View 7 Replies View RelatedThe format of the data shown in sheet below is divided by '|' where it represents a cell divider.
Sheet1
-------
A | B | C
ClassA | ClassB | ClassC
Sheet2
-------
A | B
ClassA | Student01
ClassA | Student02
ClassB | Student01
ClassC | Student02
ClassC | Student03
ClassC | Student04
Sheet3 - Final Output
-------
A | B | C
ClassA | ClassB | ClassC
Student01 | Student01 | Student02
Student02 | | Student03
| | Student04
Sheet3 = check if there is a match between Sheet1 and Sheet2, if there is, then use Sheet1 as a header (ClassA, ClassB, ClassC) and paste the matched data under the respective header.
I have an Excel file that has several worksheets. One of the worksheets is a letter and one is an envelope. Instead of typing the name address twice I need to have th name and address info repeated onto the envelope each time I use enter info in the letter. I know how to do this with a formula but not with a text.
View 1 Replies View RelatedIs there any code that can be written so when a person selects a tab to be moved to a new workbook, the macro code in the existing workbook would be copied to the new sheet? I'd also like to use a button that the user could click on for the macro.
View 3 Replies View RelatedBasically, I have a worksheet of client info on a row by row basis.
Each client has a ref number (eg A4 is the ref for the first client. A5 the next, A6 the next etc etc)
I would like to know how to copy and paste each ref number into worksheet 'Proforma Template (2)' every 11 rows down, until the end of the client list is reached.
So, copy/paste value of cell A4 into 'Proforma Template (2)' cell E9, then A5 to 'Proforma Template (2)' E20 etc (every 11 rows)
(I've read up about various types of loops but not sure where to go with it)
Once I have this on a macro, I'll use vlookup to take the rest of the data across. (im more familiar with using vlookup so should be ok there)
I have a workbook containing a number worksheets. I need to copy one of these sheets and move it to a new workbook before copying and pasting the contents as values and saving as a new worksheet. Ideally the new workbook I'm creating would contain no other worksheets other than the one I'm copying in.
View 3 Replies View RelatedI'm trying to do some userform development with multiple dependent comboboxes, but I am having trouble populating the third and last combobox. First, I populate the 1st combobox on the userform initialization. I can get the first 2 comboboxes to populate correctly, but I can't seem to get the 3rd combobox to populate correctly.
The 3rd combobox takes the selection from the 2nd combobox and searches column "A" in the worksheet "Chassis Specs" and populates the 3rd combobox with data from column "B", there will be repeat items in column "A", but all those occurances should populate the 3rd combobox with the data from "B".
I am attaching my whole workbook.
Chassis Specs Info_Build_REV B.xlsm