As part of a larger formula, I need a way to evaluate a range row by row and generate an array with the results. More specifically, I need to evaluate whether at least one of the cells in a row has a specific value.
So given the following table:
1
1
1
2
2
1
2
2
3
3
When querying the table for the value "1", it should result in the array {TRUE, TRUE, TRUE, FALSE, FALSE}.
How can I achieve this?
It is to large to upload here and I have removed the sensitive data that would normally be present. The part I'm currently stuck at is the multiple search criteria, one part works while the other does not. Also, I have yet to discover a way to indicate to the user that the correct Row is selected and being edited in the right cells.
View 2 Replies View Related1) The following formula returns TRUE or FALSE:
=AND($J$15"",(MOD(SECOND(NOW())-1,6)+10) = COLUMN())
It works fine as long as the w/b is busy doing something!
2) Otherwise if the w/b is not busy, the formula appears to be calculated only ONCE at the current time NOW(), and F9 must be pressed repeatedly to re-calculate the formula despite Tools::Options::Calculation is set to Automatic.
3) Is it possible to have NOW() representing a progressive NOW()?
4) If not, can the above formula be modified such that it is evaluated continually for, say, the next 60 or 120 seconds from the current NOW()?
I have created a non-subjective job evaluation spreadsheet, which takes data obtained from a work daily of an individual and is implemented in my spreadsheet. The columns of areas to be evaluated will average each individuals performance by averaging the individual to the rest of his shifts performance and a point system has been established depending on their work level. The situation I'm running into is I'm using the formula below to establish my point system. In an effort to be fair in every way possible, should a particular column end up with all zeros "0" this would then become the average, which should provide the individuals in this group with three "3" points. My forumula as it is set up will now only give one "1" point, when it should be three. The point system works great other than this one particular problem, when everyone has a zero. I'd sure appreciate anyone's suggestion how I might be able to add one more IF statement to this existing formula. Note: I29 is the cell for this particular column that represents the average of the column with data in it. I28 is 10% above average, I27 is 20% above average, I30 is 10% below average and I31 is 20% below average.
point system is 1 point for 20% below average, 2 points for 10% below average, 3 points for average, 4 points for 10% above average and 5 points for 20% above average.
=IF(ISTEXT(I3),0,IF(I3="",0,IF(I3<=$I$31,1,IF(I3<=$I$30,2,IF(I3<=$I$29,3,IF(I3<$I$28,3,IF(I3>=$I$27, 5,IF(I3<$I$27,4))))))))
In an Excel sheet, in A1 I have written B1 and in A2 I have written D20.
I have a data panel in B1:D20.
I would like to call a vba function my_Fun that acts on my data panel and returns a double in cell A3.
Instead of writing my_Fun(B1:D20) in A3 I would like to be able to write my_Fun(A1:A2), where the entries in A1 and A2 are called, rather than A1 and A2 being used to define the range themselves.
I'm trying to find a formula that will give me a count of all programs by month that have an evaluation result. So, in column A1:A24 I have a list of programs with. In cell A25, I have the total number of programs. In column B1:B24, only 7 of those programs have evaluation results, some of the rows are blank.
I know that I can get a sum of the programs by month, but how do I only get a count of those with an evaluation result? What formula can be used to get a year to date (a running count), not a count based on 12 months? Meaning that we would need a year to date for each month, so currently for October to June (based on fiscal). If we based it on year to date, then I think we would have to divide be 12 and that would make the results inaccurate.
I'm using Excel 2010.
A formula I am using is outputting "0" instead of the expected value. Upon evaluating the formula I realized that this was because some of the values - years, in this case - had quotes around them while others did not. Please see the image below for the screenshot of the evaluation.
These values - the years - are being evaluated in the following formula.
Code:
=SUM(
IF(inventory!$F$3:$R$3=$A3,
IF(inventory!$B$4:$B$56=$G$1,
IF(inventory!$D$4:$D$56=$G$2,
inventory!$F$4:$R$56))))
This formula references the following sheet (an excerpt from that sheet). You can also see the formulas found in the cells causing the problem.
*ABC5212/20/20102010Adjustments53*20112011543/17/20112011Carwen Printers559/9/20112011Adjustments569/9/20112011Copeland Printing
Spreadsheet FormulasCellFormulaB52=IF(A52="",C52,YEAR(A52))B53=IF(A53="",C53,YEAR(A53))
B54=IF(A54="",C54,YEAR(A54))B55=IF(A55="",C55,YEAR(A55))B56=IF(A56="",C56,YEAR(A56))
I suspect that the problem is being caused by the output of the formula in these cells. If I simply type in "2011" instead of using the formula in B52:B56, then the first formula in the code section above does not have a problem.
How I can reconcile this?
I am trying to create an Array, and have searched through many threads on this website and realise I don't have a basic understanding of Arrays. Specifically the ReDim Array function.
View 2 Replies View RelatedI have a doubt, in VBScript for excel is possible create an associative array?, for example:
PHP Code:
Dim columnValue(26) As Variant    columnValue("A") = 1    columnValue("B") = 2Â
So if I want to know the value that corresponds to the letter B the result must be: 2
MsgBox columnaValor("B")
I have attached a spreadsheet of data that I would like to reduce.
In the workbook there is a set of data (rows 1 - 24) which are defined with random dates (row 2) and number criteria column A.
In the table below that (rows 28 to 37) I have set out how I would like to present the data. how to create an array formula that sums the above data months into the criteria of column A.
Array set for workbooks? I have more than 10 workbooks to update
refer to attachment. the VBA code is in Consolidation SOP.
I have an array which I would like to extract the information and put it in a table in a spreadhseet. Does anybody knows a faster or better way to do it different than using a for next?
View 2 Replies View RelatedSub Macro2()
Dim stgSheets As String, Cnt As Long
Dim arrSheets()
Cnt = Sheets.Count
ReDim arrSheets(Cnt - 1)
For i = 1 To Cnt
stgSheets = stgSheets & Sheets(i).Name
arrSheets(i - 1) = stgSheets
'sSheets = sSheets & "", ""
Next i
[Code]...
I have the following problem:
In cells A1 to A4 I have 4 numbers (8,7,12 and 15).
In cells B1 and B2 are the numbers 1 and 4
Now I want to use the max function to find the highest value in the cells A1 to A4. But instead of typing =max(a1:a4) I want to use other cells that tell excel where to look. What I exactly want is to say =max("a"&B1:"a"&B2) because in B1 and B2 the rows are indicated from which to which excel shall find the maximum.
I have a dynamic number of rows each with three colums of values. These varaibles I want to fill an array with but I don't know how.
Now I've just "concated" these three variables into a string and then I intend to split the string into rows by the third comma. (see below)
I think it's easier though to use an array and I really appreciate some assistance. Please tell me also the best way to sort the array. It will be sorted by var_Status which is an integer. (sort order: max positive to max minimum)
PreString = PreString & var_StartWeek & ", " & var_Status & ", " & var_Totalh & ", "
I am fairly new to VBA, i require some help creating a Standard Deviation UDF using arrays, i have made a userform that allows a user to select anywhere between 1 to 30 companies (A1: AD1) and its corresponding stockprices (A1:A60) in a sheet called companydata, using the following sub, my problem is that i am unsure how to create a function using the info the user selects. I have also created a returns function (below) but this is vba is saying that there is a out of range error, Will anyone be able to help please.
Below is the code i am using to allow for my sub: ....
I've created a range B3:B12 in which each cell returns TRUE of FALSE. There corresponding values are listed in C3:C12. I have the same thing again in D3:D12 and E3:E12. Checkboxes link to the TRUE/FALSE cells. Attached is a stripped down file to show this.
I want to create a formula that lists each item in the one cell (no spaces required inbetween) for use with a search. I know a long winded way to do this involving many IFs but any array will be much more tidier, thing is I hardly use arrays and have struggled with this one.
I'm thinking it will be along the lines of =IF(B3:B12="TRUE",C3:C12,"")&IF(D3:D12="TRUE",E3:E12,"") but exactly what it should be is beyond me.
EDIT: The original file attached was corrupt for some reason, the new attachedment is the same except instead of TRUE/FALSE cells I've set them to 'x' for quickness (lost my work...!).
Create array set for checking multiple workbook?
[Code] .....
I have this formula, ( which i found the basis of on a You tube video and Richard Scholar was accredited with improving the soloution)
=SUMPRODUCT(--ISNUMBER(F4:AH4)*10^{-29,-28,-27,-26,-25,-24,-23,-22,-21,-20,-19,-18,-17,-16,-15,-14,-13,-12,-11,-10,-9,-8,-7,-6,-5,-4,-3,-2,-1})
This forumla generates a number for each player, the higher the number the more inline they are to get a game
Problems are this works for the 29 weeks of this year but more weeks need added to the end of the year as we get there. Can i generate the array numbers from a formula and shorten.
This is a sample data ignore row 2( just a count of players) and data actually goes back to 6th Jan
Excel 2007BCDEFGHIJ1Wk21Wk22Wk23Wk24Wk25Wk26Wk27Wk28210101010101010103Player 1111104Player 210001105Player 300101016Player 4010101107Player 50110118Player 600009Player 7111000110Player 8011100011Player 9000012Player 101011113Player 11101114Player 121010115Player 13016Player 141010017Player 15118Player 160101Sheet1
I'm trying to create a single array from multiple ranges... I'm not sure what syntax to use:
Code:
Dim dat4() As Variant
Set r = Sheet13.Range("rsqlassetid")
Set r2 = Sheet13.Range("rsqlparentcat")
dat4() = (r , r2)
I can create an array with multiple columns from a range if the columns are next to each other but in this instance they're not.
These 2 ranges both have the same number of rows and I'm trying to combine them into a 2 column array, but not sure how to make it work without looping, rediming the array and using a secondary array to preserve the data...
I got the following code:
Code:
Function DateiAuswaehlen() As Variant
Dim FileOpen As Variant, i As Integer
Dir Left(KonvPath, InStr(KonvPath, ""))
[Code]...
Basically, I want the function to return an array, but also work when the user does not choose any file.
I have a sheet of data that I can filter (e.g. only show male pupils).
On the next sheet I want to display the list of filtered results with no gaps.
As the user will be able to select which column of data to show from the first sheet I am referencing it as follows:
INDIRECT("'Progress Matrix'!"&ADDRESS(MATCH($B$6, 'Progress Matrix'!$A:$A, 0)+1,
MATCH(C$6, 'Progress Matrix'!$1:$1, 0))&":"&ADDRESS(300, MATCH(C$6, 'Progress Matrix'!$1:$1, 0))))
(However this formula no longer seems to work as I think I changed something).
I've tried to incorporate
SUBTOTAL(3,OFFSET(A2,ROW(A2:A100)-ROW(A2),0))
to only show filtered results but with no success.
Progress Tracker.xlsm
Excel 2007, Windows XP
I am concatenating some cells into an array. The amount fields should always have just 2 rounded digits following the decimal. What should change in the following VBA code to achieve that result?
Currently Cells(r, 6) & Cells(r, 7) could have these values:
1.5
24.78945678
45.2341
What I want is rounded values to 2 decimals:
1.50
24.79
45.23
The array is used as an input parameter in a remotely called function module, after logging into the remote system, SAP.
' delim is a | character
' Populate Myarray with data from all rows
' - Only from rows which are not hidden ' 05/23/2008
For r = 1 To row_count 'r is row number
if worksheets("JEMASTER").rows(r).hidden = false then
i = i + 1 'increment myarray index by 1
myarray.AppendRow
[Code] .........
I’m trying to use the SUMIFS function in Excel 2007 to evaluate the following formula:
{=SUMIFS(range to sum, range to evaluate, evaluation criterion)}
The range to sum is A1:A10, the range (dates) to evaluate are in B1:B10, and the evaluation criterion is that the date is before 31/10/1999.
So my formula looks like this:
{=SUMIFS(A1:A10,B1:B10,”<31/10/1999”)}
This works fine, but how do I refer the 3rd argument in the function to a date in a particular cell rather than typing in the date specifically?
I'm trying to create a dynamic array so that when a user enters the first sheet name via an input box, excel will know to select the other sheets with ending (2), (3), (4) etc.
Currently this code works only if there are 4 sheets present (as I set this way), anything lower/higher is out of range.
How do I make it so that it will select sheets if there are less than 4 sheets present?
I tried nesting, but I pretty sure this array needs redimming or something. Is ubound a better option?
------ A ------------------- B
John123@gmail.com--------Blue
Bill323@gmail.com ---------Red
Sue223@gmail.com -------Green
Sue223@gmail.com -------Yellow
Bill323@gmail.com ---------Red
Bill323@gmail.com --------Yellow
John123@gmail.com ------Yellow
Sue223@gmail.com --------Blue
- C --------------- D ---
John ------------Blue, Yellow
Bill --------------Red, Yellow
Sue------------Green, Yellow, Blue
I am using Excel 2013 on Windows 7. In the above example columns A & B is the given list to process, and Columns C & D contain the result I am trying to achieve. The major part of this that I am having trouble on combining, separating them with commas in another cell, and ignoring a duplicate value. You can see bill has two red values, but I only need it displayed once in column D.
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....