Excel 2010 :: Formula Evaluation Shows Numbers In Quotes
Dec 21, 2011
I'm using Excel 2010.
A formula I am using is outputting "0" instead of the expected value. Upon evaluating the formula I realized that this was because some of the values - years, in this case - had quotes around them while others did not. Please see the image below for the screenshot of the evaluation.
These values - the years - are being evaluated in the following formula.
Code:
=SUM(
IF(inventory!$F$3:$R$3=$A3,
IF(inventory!$B$4:$B$56=$G$1,
IF(inventory!$D$4:$D$56=$G$2,
inventory!$F$4:$R$56))))
This formula references the following sheet (an excerpt from that sheet). You can also see the formulas found in the cells causing the problem.
I suspect that the problem is being caused by the output of the formula in these cells. If I simply type in "2011" instead of using the formula in B52:B56, then the first formula in the code section above does not have a problem.
Attempting to match acct #s on source sheet with account numbers on Template but the numbers on the source are = to the cell value while the numbers on the template are equal to finding the source cell value in the template. Let me explain with code.
Set Source value:
Code: Set FirstIO = zfir.Range("e8") Set Template value:
Code: Set CheckIO = Range("Accounts").Find(IO, LookIn:=xlValues) When I get here:
Code: If FirstIO = CheckIO.Value Then I get a mismatch because FirstIO = 3333333 and CheckIO = "3333333"
I am working in Excel 2010 (Windows 8) and am having real problems trying to find a function/formula that will work with both numbers and text. I am trying to identify if the contents of Col A cells and Col C cells on each row are duplicated within a worksheet, and if they are, to add a 'J'.
(Column A is a list of numerical company codes and Column C is a list of adviser codes using the letter A-G. If a company ID code has more than one of the same adviser codes referenced to it, it is termed 'Joint', hence the 'J').
The formula I've used is: =IF(A2:C2, FREQUENCY>1, "J")
I'm creating a basic form or templateusing Excel 2010 where the user will fill out information (See attached screenshot) I'd like to incorporate two a check boxes, that when ticked, change the display of the second table, either adding, removing or splitting of of the current columns in to two?
Is this, or any variation of, possible using Excel 2010.
I have created a non-subjective job evaluation spreadsheet, which takes data obtained from a work daily of an individual and is implemented in my spreadsheet. The columns of areas to be evaluated will average each individuals performance by averaging the individual to the rest of his shifts performance and a point system has been established depending on their work level. The situation I'm running into is I'm using the formula below to establish my point system. In an effort to be fair in every way possible, should a particular column end up with all zeros "0" this would then become the average, which should provide the individuals in this group with three "3" points. My forumula as it is set up will now only give one "1" point, when it should be three. The point system works great other than this one particular problem, when everyone has a zero. I'd sure appreciate anyone's suggestion how I might be able to add one more IF statement to this existing formula. Note: I29 is the cell for this particular column that represents the average of the column with data in it. I28 is 10% above average, I27 is 20% above average, I30 is 10% below average and I31 is 20% below average. point system is 1 point for 20% below average, 2 points for 10% below average, 3 points for average, 4 points for 10% above average and 5 points for 20% above average.
I'm trying to set up a macro to be assigned to a button to copy the text in a cell into an application which uses similar text capabilities to Notepad.
The simple macro of:
Range("D5").Select Selection.Copy
... results in the text of the cell being copied to the clipboard with quotation marks before and after the text. I can manually enter the cell, select the text, the copy it... but this process can not be recorded in a macro - I can edit the cell and copy the text but when leaving the cell it gives the error "unable to record".
Is there any way I can copy the text to the clipboard without getting these quotes?
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
I have given a table with some decimal values like e.g 0.3658 0.358 0.485 0.7863 0.558 0.858 0.985, I want to find the sum and average of these number.
1) I have tried the autosum or auto Function =AVERAGE(A2:A7) but it yields #DIV/0! error 2) when I use =AVERAGEA(A2:A7), it yield ans=0 3) puttin =ROUND(AVERAGEA(H2:H23);3) also yields 0;
Open a brand new spreadsheet whether the format is set to "General" or "Text" it will not let me enter numbers. For example, when I enter 2007 in the cell it displays 20 07 not really that big of space between the two zeros - but still a space. I can't format this no matter what I do.
In Excel 2010, I have a list of numbers with about 7000 rows. I am trying to track the number of times the number "22" appears within 30-day periods, with the end-result being a "count column".
While I could enter a formula manually for the date ranges, there are over 200 time-spans I'd have to enter (list goes back to year 1994). Is there a way to automate this process...
Excel 2010ABCDE1DateNumbers List# of Days AgoCount for number 22205/31/12304305/30/12602405/29/12909505/28/12301202605/27/12391505705/26/12371807805/25/1222210 11905/24/123824051005/23/122227091105/22/123230011205/21/123533001305/20/12383608
I'm currently working on my masters dissertation and am using excel 2010.
Basically, I'm trying to generate a list of say, 1000 numbers within a range. I can already do this using the rand() function. However, I need excel to take each random number, apply it into a formula, and then list the answers in a seperate location. This would be easy to do if there was one simple function (which i could just insert into any adjacent cell). The problem is that each random number value is input into a table. The table, which has about 10 columns and 200+ rows, gives one final answer.
I'm sure there has to be a faster way than creating 1000 tables for each random number generated.
Let's say I have a list of 1000 random numbers in sheet 1. the function table is in sheet 2 and produces the answer in the same sheet, in a single cell. I'd like excel to use each random number generated, input it into the function table, attain the answer from the table, and list it in the cell next to the random number.
I have a column of Dates in Col B with corresponding X values in Col C. I specify a start date in Cell F14 and an end date in Cell F16. I then use the function shown in cell H6 to identify the starting row number (corresponding to start date) in Cell F6. If I used the same function to identify the end row (in this case 4/2/13), it would choose row 8 which is the first row in which it encounters that date. Unfortunately, I need the end row to identify the last row that date appears in. In this case, that would be row 11.
Excel 2010ABCDEFGHIJKLM1 Date and TimeX2 3/30/201334/1/2013 1:366.9744/1/2013 4:563.95 54/1/2013 4:573.27 Start Row64/1/2013 5:165.553=MATCH(DATE(YEAR(F14),MONTH(F14),DAY(F14)),$B:$B)+174/1/2013 5:172.35 End Row84/2/2013 17:191.59894/2/2013 17:192.81 104/2/2013 17:252.14 114/2/2013 17:262.05 124/3/2013 5:152.84 134/3/2013 5:154.11 Start Row144/3/2013 5:173.2404/01/13154/3/2013 5:173.45 End Row164/3/2013 17:124.0304/02/13174/3/2013 17:133.621819Sheet1
I am trying to find duplicate numbers in sets but so far I can only highlight the ones that are in exact order. I need to find each set that has the same numbers, in any order. Example..
I will provide an example of sets of 3. But I get 3, 4 usually but sometimes 5 or 6.
I get them from different people.
Person A- 234, 569, 498, 849, 848,343,567,347 etc...
Person B- 432, 596, 677, 566, 565,433, 455 etc..
Now I need to find each set that has the same numbers, any order. Like 234 from A and 432 from B would be the same, so I would need to highlight them 2 sets. But I can not figure out how to do this. For Excel to highlight it they have to be 234 and 234. Does not recognize same numbers, different order.
I am using Excel 2010 and I am trying to calculate 4 different factors' (columns) values which are numbers. Based on my analysis I will assign the value from 1-5 for each factor and at the end I have to decide the priority (a new column) adding all 4 columns' numbers. My Priority column has three criteria (High, Medium, and Low) but I don't know what formula/function to use and how. I have tried IF function but did not work.
Some of the below address was removed, how would this formula be written in VBA? When I try to record this formula excel tells me unable to record, probably due to all the & within the address itself ...
Please find the attached MS Excel 2010 file <average set.xlsx>.
There is set of positive set & negative set of values available in the Column A. The values are plotted against Column A in Column B. Light green are positive sets and light yellow are negative sets.
Now I want to calculate the average for the positive set & negative set of values as shown in light majenta in the cells F4:F9. Also all majenta cells to be plotted by formula.
The Column H and Column I also same as like above , but here negative set of numbers starts first.
I need to remove numbers from a string of text and put them into new cells in Excel Starter 2010. There are two different values which need moving. The first is in parentheses and the second follows the parentheses.
Here's a few examples of what I mean:
Original text RED008 - Wickaman and Hoodlum bandwidth (0.06Gb @ 2.00) 0.12 MFR005EP - Various Artists bandwidth (0.19Gb @ 2.00) 0.38 RAZORS010 Future Cut bandwidth (0.01Gb @ 2.00) 0.01
would like to split into...
Cell 1 RED008 - Wickaman and Hoodlum bandwidth MFR005EP - Various Artists bandwidth RAZORS010 Future Cut bandwidth
I need to divide the numbers on sheet 1 column D. This column contains numbers and blank cells so I need to divide by the actual number of cells that contain only numbers. I will be referencing the divided numbers on sheet 2 in a monthly summary format.
1- I dont know why but sometimes excel 2010 converts numbers to dates automatically in my workbook. I use this macro to solve the problem, but since last week it is not working. I get an error: "Method 'NumberFormat' of object 'Range' failed".
2- because it should work in all cells of the workbook, the macro must make changes only in the cells with absolute numbers (ex: 1223) but must not change if in the cell there is a date like 12-may-2012 (numbers with hyphens).
This is my function: _____________________________ Sub PuxaDatas() Dim sht As Worksheet For Each sht In ActiveWorkbook.Sheets
About descending and related to each others, I mean for example : #700 in column A,B,C,D,E,F,G,H places in the same row and the same happen to #1533.954 and others. About the numbers that are The One ( like 549.894), I need to put them in its column and a new row with empty cells in its other columns. In the end i want a table like this:
I have been using MSNStockQuotes on a few computers without any problems for months.
Now (in the last day or so) , when I press "update Quotes" on any of the computers, I get a "Failed to get requested Data" message. I can often "trick" it into getting the quotes by deleting a bunch of the quotes, then choosing Edit-Undo, which then fetches the quotes properly, but even that fails some of the time (same displayed message).
This happens even with older copies of my spreadsheet that used to work perfectly.
Are others having problems with MSNStockQuotes Excel Plugin?
I'm trying to put a formula into a group of cells with VBA. However, the formula requires quotation marks in it...e.g.,
the formula in the cell should be... = "STR - " & intRow
where intRow will insert a designated integer. My problem is the quotes for the string part....I can't get the VBA code (tried both setting a string variable and using range.value =) to keep the needed quotes.
I am trying to create challenge/response cards. Each card will have a 5-digit number in the upper-left and lower-right corner along with a series of rows containing a line number and 3 pairs of challenge/response words.
Rather than have have copies of these cards, I want the central office to have a macro-enabled workbook wherein they can enter the two numbers from the card and have the challenge/response matrix regenerate on a worksheet.
So, essentially, I want the challenges random number generator seeded from one of the 5-digit numbers and the responses random number generator seeded from the other 5-digit number.
I am trying to use
Code: Randomize(Seed) where Seed is one of the 5-digit numbers.
The problem appears to be that, no matter what I use for Seed, the RND(-1) function is not resulting in different numbers.
I have a macro that imports text file and puts a comma after each number (alphanumeric also). I have tried to change it to put single quote around the number and comm afterwards.
Text file listing 123 456 789
When I run my marco I get the following 123, 456, 789 which is what I want...
Now I want the same text to have single quotes around the data example: '123', '456', '789'
All that I have tried to adjust keeps missing single quote at the front end and also missing the single quote at the rear end example: 123', '456', '789
Here is the vba I'm running
Sub GetserialNumbers() Dim FileNum As Long, PathAndFileName As String, TextFromFile As String Const Delimiter As String = ", "
[Code].....
Whe I run this I have to select the text file to get. I keep it in my documents as a quick access. I'm using MS VBA 6.5 Excel 2007 Windows 7 Enterprise.