I'm trying to create a single array from multiple ranges... I'm not sure what syntax to use:
Code:
Dim dat4() As Variant
Set r = Sheet13.Range("rsqlassetid")
Set r2 = Sheet13.Range("rsqlparentcat")
dat4() = (r , r2)
I can create an array with multiple columns from a range if the columns are next to each other but in this instance they're not.
These 2 ranges both have the same number of rows and I'm trying to combine them into a 2 column array, but not sure how to make it work without looping, rediming the array and using a secondary array to preserve the data...
cubspline(Xval As Double, XRange As range, YRange As Range) As Double
The problem is that XRange (and also YRange) is in different areas of the spreadsheet. I want to combine these areas into one range which I can pass on to the cubspline function. What is the easiest way of doing it? I'm looking for something like a "union" function for ranges in Excel.
IM trying to add the result of multiple ranges sharing a single criteria and have had no luck. I am trying to get the range from every other colum and have the total qty of the selected criteria display in a single cell. The best way to describe is countif with multiple ranges and a single criteria. perhaps countif isnt the answer, it is the only way i know to describe the issue though.
What I have is a large number of sheets in a workbook (26 to be exact). Each of these sheets has one specific named range. The file itself is quite large so I would like to print these ranges to a single PDF file. I did my best to search for this topic in the forums and while I did find some macros that were close, there was some sort of piece of code missing. Also, will how I list the named ranges determine the order of how they will show up in the PDF File?
I have a log where I'm recording daily readings of a pipette. Each day three readings are taken and I have each stored as a dynamic range so that I can monitor how in control my process is. However, when I graph it, I would like it to be one continuous line graph (Three readings from day one followed by three readings from day two, etc.). I'm having difficulty doing any sort of combination.
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10,MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP(INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
I am trying to rank records from multiple sections of a single array. Since there are over 100 sections I want to use a formula. Using the MATCH function I have the first row for each section of the array (Col D below). The psuedo code of what I'm trying to do is:
RANK(B1,Bfirst row of section:Bfirst row of next section -1)
Example (results in Column C):
A B C D 1 West 100 3 1 2 West 150 1 4 3 West 125 2 4 East 50 3 5 East 75 2 5 East 140 1
I will also need to increment the section as I complete each section of the array. Am I trying to do too much in a single cell??
I am building a marketing dashboard that shows the effectiveness of two campaigns based on where the campaign has been deployed (website, email, facebook, twitter, google+ etc.). In each campaign I have a checklist (using developer ribbon) with these different dimensions.
I want a formula that checks the checklist, identifies all the boxes that are unticked and returns them in a single cell. The cell would read:
To increase traffic to the Shampoo campaign (Campaign A), expose it to Google+ and Facebook as these channels generated 578 and 2009 visitors respectively for the Makeup campaign (Campaign B).
I already have it working for returning a single value with the following formula but need it to return multiple values.
=IFERROR("To increase traffic to the "&B4&" campaign, expose it to "&INDEX(L4:L10, MATCH(K5,M4:M10,FALSE))&" "&"as"&" "&"this channel generated "&VLOOKUP (INDEX(L4:L10,MATCH(K5,M4:M10,FALSE)),L26:N31,2,FALSE)&" visitors for the "&D4&" campaign","")
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
I am trying to do something that sounds fairly straightforward but have not been able to achieve the final result.
I have a sheet which has multiple range addresses stored in different cells and so far I have been able to pass the Range address to Range variables by looping through a range array. Now I would like to select these multiple ranges. My code looks as below;
VB:
Dim Cnt As Integer Cnt = Sheets("Sheet1").(Range("1040").Value ' Cnt holds the the total number of ranges to be specified in Sheet1 Dim RStr(1 To 80) As String ' This will hold the range addresses specified in Sheet1 in cells C1041 to C1120. Upto 80 range addresses could be specified. [SIZE=2] Dim Rng(1 To 80) As Range ' This will store the ranges based on the range addresses stored in RStr() Dim i, j As Integer,
[Code]...
I am not sure on how to select multiple ranges using range array hence tried Union() however it is obviously not correct and throws an error.
On a weekly basis, I receive a single worksheet in a workbook that contains ~30,000 rows of product sales.
Row one contains column headings that is unique to all other rows. Column A contains the store number that sold the product. There are ~50 unique store numbers.
I am trying to create a macro that will break the report up into seperate workbooks.
For example, assume in column A there are 30 rows of data for 3 different store numbers (say store 112, 386, & 798, each with 10 rows of data). I want to create 3 new workbooks and include the same column heading for each. For example, name new workbooks as follows: "Store 112", "Store 386", "Store 798".
I am having an issue with looping through data ranges. Below is a subset of my macro. What I require is for LegendRng to stay the same and DataRng to move after each loop.
However everytime the vba runs through a loop, the previous range is recorded i.e. the source data for the chart is "A1:D5" instead of "A1:D1, A5:D5").
I have values in Worksheet 1, spread over A1:D25 and A200: D250.
In worksheet2 I have values again from A1:D25 and A200:D250.
Is is possible to only get the unique values of those 4 ranges with the advanced filter? They all need to be shown in eg worksheet 3 starting in A1, (so kinda merged in a sense)?
Is that a thing more for a UDF, or is there a excel function/option that does exactly that?
I have been looking for ages for that kind of function/option, since I thought it must be possible. But this sure does not look to be a standard functionality, or is it? Is there a (free) add-in that might do this kind of thing?
I found this code on some office help page:
Sub SortAllRangeData() ' Place column header for temporary sort area. Range("IV1").Value = "Numbers"
It kinda does what I needed, but it lists the actual data in the same spot it used to be. I want to be able to list the sorting in a different column on a different sheet and in 1 column only. Is this difficult to modify so it becomes a UDF or is this something totally different?
I have a data set where the rows contain monthly sales data (from January to December) and the columns contain the names of employees (joe, bob, sue, etc.) and a single "group average" column:
I would like to create a chart for each employee showing the employee's monthly sales vs. group average. For example, the first chart would be for joe...
Then the next chart will be for bob and so forth...
What I'm trying to do. I have two separate requirements:
(1) To add the whole array to a listbox on form initialization - see Sub UserForm_Initialize() (2) To clear the listbox and re-add only certain items based on what's typed in a textbox - see Sub txtSearchTerm_Change()
I have two errors:
Error 1 in UserForm_Initialize()
The listbox contents need transposing! It is displaying as
Code: 1 2 3 4 5 Tom Ben Heidi Julie Mark Smith Jones Evans Simpson Petersen x@yo.com a@bo.com c@do.com e@fo.com g@ho.com 02071001022 02071001026 02071001027 02071001028 02071001029 Friend
When it should be displaying as : Code: 1 Tom Smith x@yo.com 02071001022 Friend 2 Ben Jones a@bo.com 02071001026
Is there a way to transpose the array?
Error 2 in txtSearchTerm_Change()
I cannot find anywhere - even on MSDN - all the information I need how to correctly add a single record to a multiple-column listbox! What I'm trying is:
Code: For i = 0 To UBound(SearchList) If InStr(1, SearchList(i), SearchTerm) 0 Then With lstPeople .AddItem For j = 0 To UBound(PeopleList, 1) .List(c, j).Value = PeopleList(j, i)
[Code] ......
How do I add a record to the listbox????
Full code for reference:
Option Explicit
Private PeopleList As Variant Private SearchList As Variant Private Sub UserForm_Initialize()
I cant seem to find the correct syntax for creating 14 validation lists using array members as the source of the named ranged. The validation lists are stored on a different worksheet, the Named Ranges are created fine, as are the ranges that are having the validation applied. The Syntax I am having a problem with is
Public Sub assignDVList(WSD As Worksheet, sListName As String) Dim DVListName As String DVListName = "DV" & sListName Application.Goto Reference:=sListName With Selection.Validation .Delete .Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _ xlBetween, Formula1:="=" & DVListName
It is the Formula1:="=" & DVListName that is creating the headache. The sub is called as the array moves through the columns, using the header row as the Name for the Named Range, and the data Validation worksheet uses the same naming except it has DV in front.
Find Multiple instances of Numeric Criterion in Row & Return To a Single Column.
I have a Dynamic Named Range "Data" spanning 10 Columns and many Rows. Each Row may contain duplicates of the Numeric Criterion.
I would like to find ALL instances of a specific Numeric Criterion across each single Row in the Dynamic Range "Data" and have the Results returned to a New Sheet in a single column.
NEW Sheet: The Numeric Criterion is housed in G5. The matched criterion should be returned to the New Sheet starting at G7. Duplicate instances in the same Row should ALL be returned to the same cell in Column G on the New Sheet.
Sample Data Layout: Columns I J K L M N O P Q R Row No.76 1 0 1 1 0 1 1 1 0 1 Row No.77 2 2 3 2 1 2 2 0 0 0 Row No.78 3 3 3 3 3 0 3 0 3 0
Scenario: Looking for Numeric Criterion 1 (one).
Expected Results - New Sheet: Row No.7 Column G (Cell G7) 1111111 Row No.8 Column G (Cell G8) 1
In Row 76 of the Sample Data ALL seven Numeric Criterion of 1 (one) should be returned to the same cell G7. In Row 77 of the Sample Data there is only one Numeric Criterion of 1 and it should be returned to cell G8.
I have a very large spread sheet of about 20,000 rows. I need to output to a cell postcode ranges based on the Zone. Not all the numbers in the postcode zones are consecutive.
For the example below, the output cell for the DWN range would display like this: 0800-0801, 0804, 0810-0813
Each output cell postal range must be specific to each zone.
Is there anyway to do this without manually doing it? I would like to tell you I've tried this and that but I've never done anything like this before so I really don't know where to start.
I am trying to get the contagious cumulative sum of various data ranges in the same column in my workbook. Data ranges are dynamic so i can not use formulas. I have prepared a table below for illustration. I need the VBA code to calculate the cumulative amounts in column C highlighted in Bold.
There is always a blank row after the cumulative amount. There is also always a text (as in column A of this example) in the same row as where the cumulative is summed up, maybe it can be useful for the code.
I would have written some code but for the algorithm to be used in this case. Maybe a nested for loop, not sure.
How a single-cell formula to check that 2 transpose arrays are equal.
For example, A1:A5 are {1,2,3,4,5}
AND
B3:B8 are {1,2,3,4,5}
Is there an array formula in C3 for example, that will check (i.e. say TRUE) if corresponding ranges are true i.e. check in this cell that A1=B3, A2=B4,...A5=B8.
What I’m trying to do is get a single cell to look at an array, if there is a number in that array which is between 2 limits to return that number. This is eventually going to work with limits of dates/times, and have to be updated once a day. I’ve attached a workbook with an example of the data and the way I want it formatted. {=IF(AND(A1:A25>=D32,A1:A25<E32),A1:A25,"")}
But this always returns a false. I can get it to work without using array and just having cell to cell logic but this means I would need the same amount of columns in the formatted data as the raw which is impractical.
Ok I'm writing an extraction formula. I've got my array of Trues and Falses, but now I need to go through each row and check if all the columns are TRUE, and then return the row if all the columns are true.
Right now I'm just working with a dummy set of data... my real table is some 50 columns wide and over 300 rows, but this gives you the idea of what I'm doing:
I tried putting in a Countif and using it like and array to count the different rows and return the number of times each row was returned... but countif goes nuts when you try an array for the criteria.
I am looking for an excel formula that will allow me to perform the following logic: if a cell value in (M3:BA3)="D" then multiply C29 by the corresponding value in (M29:BA29), then sum all of the products.
I want to use Sumproduct function to sum up the values that belong only to Product "PXT" and "PCT". I enter it as array but my formulae doesnt work. can someone give me a hand. Here is my formulae: =SUMPRODUCT((C2:C10="PXT")*(C2:C10="PCT"))*(A2:A10)
