I want to create the chart below. I have data that is coded with a binary flag (0 = red, 1 = blue) that is also ordered. For example, the data I would use to hypothetically create the left hand column below looks like this
Binary Flag
Rank
0
1
0
2
1
3
0
4
1
5
1
6
I have a spreadsheet created in Excel 2003 (which is what we use at work, unfortunately).
My employees periodically take a test to ensure they have certain items memorized (or are making progress to that end). The spreadsheet rows show all 46 of my employees, and their test scores. The columns are the dates that the tests are administered. I can create a line graph based on the chart data, and interpolate these data with no problems.
The problem is that there are 46 employees! 46 lines on the same graph make for a very cluttered, hard to understand visual. I want to simplify the view by "filtering out" some of the data.
I have an additional column in my spreadsheet for each employee's work area (Area 1, Area 2, etc), and another column with data based on first letter of last name (the values here could be "A-G", "H-M", "N-S" and "T-Z", for example). I figure i could filter my line graph based on these two columns. For example, somehow select just Area 1, and reduce the number of lines on the graph to 16. Or better yet, Choose "Area 2" AND "A-M" and end up with 7 employees (and therefore 7 lines on the graph).
Here's what i have tried:
1) Select the work area column, and use the Filter, which created a drop-down list at the column heading. When i use this drop-down list, i can easily filter the data in the worksheet by Work Area, but this is not reflected in the line graph, which still shows all 46 lines. The problem was that i forgot that i had set the Calculation Options to "Manual". Setting this to "Automatic" (or leaving it on Manual and pressing F9) solved the problem, as the chart now updates when i use the filters. Calculation options are under the "Formula" tab in 2007, or in Tools -> Options -> [either calculation or formula, i forget what it's called] in 2003.
2) Create several separate line graphs in several separate sheets. I wouldn't want to assign someone else the task of maintaining a spreadsheet of such inefficient design.
Trying to create a chart from a table of data, however my column of data has zeros throughout. How do I insert a chart with just the data that are not zeros?
View 1 Replies View RelatedI am trying to have a list box that when clicked will change the chart data to whatever is selected. There are 2 options you can choose from. Order Cost (Net) and Order Total (Gross) The problem I'm running into is that the data is in 2 different rows. How can I create the drop down box to display the one that is selected? ...
View 9 Replies View RelatedHere is my scenario, I have the following data:
Data Series 1
a=3
b=3
c=4
Tot 10
Data Series 2
d=2
e=2
f=2
g=1
h=1
i=1
j=1
Total 10
Data series 3
k=4 (d+e)
l=3 (f+g)
m=2 (h+i)
n=1 (j)
I want the three stack bars together, for the series 2 & 3 I want them without any gap so I can see how data series 3 is created.
I can't find a way to create a three stack bars chart that don't have the same number of data series, I don't want percentages.
How well does Excel / VBA deal with data in a binary format? I am working on a Base64 decoder, which in basic terms means I will have 4 numbers, which I need to convert into their binary representations (6 bits each). I then need to combine these binary groups together, and then divide them up differently to give me 3 numbers (made of 8 bits each).I'm just wondering if anyone has any examples on how best to work with binary in Excel? Also if there are an gems of builtin library functions?
View 4 Replies View RelatedI am looking to create a number of series on a chart (xyscattersmooth) from a datatable. Below is my data Table....
View 9 Replies View RelatedI have a lot of outputs being spat out in csv files.
I need to get some of the data from set columns and copy this over into a master tracker. Columns are not sequencial and may need to copy change at a later date. Example attached.
Some data fields will have letters in them as well. Some are varying in length in terms of the amount of data within a cell. eg. "AB389238923589Y234HI" or just "A-GT6"
I don't know where to start VBA wise but it must be possible rather than open copy paste.
The tracker has a set name but will change quaterly.
The Output CSV files are new files with a number (no date) for titles.
How do I graph this data? I am plotting the test results (Column A is the employee number, B is the Employee name, then each of the questions are Columns D through DX with DY being the total correct by each employee) (Rows are employees and then the Ratio that the question was answered correctly) The goal is to find questions that are routinely answered in correct or that have a problem with the question.
I was hoping to graph the correct and incorrect questions so those that are either high frequency correct, incorrect or not answerd identified I can improve the test.
Example of the spreadsheet. I am using =COUNTIF(D3:D15,"1")/12 for the ratio answered correct - this should also see the ones not answered as incorrect. 1 = correct answer 0 = incorrcet null=not answered
NO
Employee Name
Question
1
2
3
[Code]...
How can I graph these results to answer which questions have a high frequency of incorrect answers? I am thinking some kind of scatter plot.
I need drop-down combo box to change a graph based on the option selected in the drop-down
Challenge: my Combo box resides on the First sheet only, but the items that populate in the drop-down list are dynamic and change depending on how many sheets exist for this document. The options in the list are Overall, Week 1, Week 2, ... Week N. Overall needs to sum up the data (or I can pull just from the summary page if I am lazy) and the Week N corresponds to a specific sheet added.
I currently am able to get my drop down to populate items correctly, and my macros to create the sheets dynamically with templates just fine (not bad for newbie).
So what I need to figure out is how to tie my drop down to make a scatter plot/bar graph based on the selected option and action. I can't find an attachment option here but here is some code:
Sheet 1 Code:
Code:
Private Sub Worksheet_Activate()
Me.ComboBox1.Clear
Me.ComboBox1.AddItem "Overall"
[Code].....
I've set up a binary matrix, such that I have 421 unique headings repeated twice: once in each column and once in each row (i.e., in the matrix the headings for row 5 and column 5 will trace back to the same description in the column headings and in the row headings).
I need to fill in 1s (case satisfied) or 0s (not satisfied) in this 421X421 matrix. Where my problem lies is in finding the exact row-column cell combination in which I need to enter the 1s. Descriptions that belong to the same group or category will be marked by these 1s in the matrix. For example, if I have descriptions 5, 9, 13, and 17 belonging to the same group I need to enter a 1 in each possible combination of these numbers: {5,9} {5,13} {5,17} {9,13} {9,17} {13,17}. I need a quick formula that will compute all possible combinations for inputted descriptions AND will enter a 1 into the cells, which correspond to these combinations.
I have a leave history report with data for leave taken for the 2014 year. The sheet contains the following headings:
Name; Leave Start Date; Leave End Date; Date Paid; Days Taken; Roundup; Offset
The roundup column rounds the days taken up, for example if someone took 0.4 days off it would round it to 1.The offset column just subtracts the Roundup value by 1 (=Roundup-1) I think we will need this for what I am trying to do.
I have created a new spreadsheet labelled gaant chart, this shows the name of the employee with the working dates for the year and has the following data:
Name
1/01/2014
2/01/2014
3/01/2014
6/01/2014
7/01/2014
8/01/2014
9/01/2014
10/01/2014
[code].....
What I would like for the macro to do is lookup Employee 1 from my gaant chart table and search the leave history data if it finds a relevant start date for the employee it marks that date with a 1, it then looks in the offset column and marks the number of offsets to the right. For example if employee 2 took leave from 1/1/14 to 3/1/14 the macro would mark a 1 on the 1/1/14, and search the offset column which would have 2, it will then mark a 1 in the 2 cells to the right of 1/1/14 also (these being 2/1/14 and 3/1/14)
I have been trying to create a macro in excel to chart a selection of data and to output the chart on the active sheet where the data was taken (as opposed to a named sheet). So basically, I have about 300 worksheets with data, and I would like to have a button on each page that automatically charts that data when clicked, and outputs the chart to the page where the macro was clicked. However, I have not been able to figure out a relative reference that will allow me to make the LocationasObject reference simply the ActiveSheet as opposed to a specifically named sheet. See my code below, which references an output to a worksheet called "Charts". Right now, all of my charts are outputting to the sheet called "Charts", as opposed to the active sheet.
Sub ConsDiscChart()
ActiveCell.Offset(29, 11).Range("A1").Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlDown).Select
ActiveCell.Offset(0, 1).Range("A1:B1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Offset(0, -1).Range("A1:C24").Select
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.Location Where:=xlLocationAsObject, Name:="Charts"
With ActiveChart
.HasTitle = False
.Axes(xlCategory, xlPrimary).HasTitle = False
.Axes(xlValue, xlPrimary).HasTitle = False
End With
End Sub
Trying to create an excel chart to create totals based upon different keys. I
need to be able to calculate how many customers there are by Manager and then
By Rep. Then to figure out how many were New, Current, Total # of RSVP and
attended for that Rep. Below is how I have started but I am having some
problems getting certain parts. I know when I get one the rest will fall into
place. I can calculate how many total customers by manager and by rep just by
doing a Countif command but how do I determine the # of New, Current etc. Is
there a If Than command? Managers Totals are simply his reps totals.
Example..
A B C D E
F G
1 Manager Rep Customer New Biz Current # RSVP # Actual Attend
Need totals to look something like this....
A B C D E
F G
1 # of Cust # New # Current #RSVP #
Actual Attend
2 Manager
3 Rep 1
4 Rep 2
The document shows a table on the left that puts the data from the table on the right into order by total (and if same, alphebetical by name). However the formula used to achive this is not compatable with previous versions of excel. Need alternative function that will bring the same outcome but work with pre 2007 versions (ie .xls file extention).
View 3 Replies View Relatedusing function IF, AND, OR, NOT the following is the description and attached is the photo of the excel file.
1-If a part is discontinued, it cannot be ordered.
2. If a part is not discontinued, is a high-demand part and is currently stocked at less than 75% capacity then it’s time to order more.
3. If a part is not discontinued, it not a high-demand part and is currently stocked at less than 50% capacity then it’s time to order more.
i need to create an user form that creates an ordered list when an input for the starting number, the ending number, and the increment is entered by the user. the ordered list must also start in the specified cell that is entered by the user. i understand how to design the user form but the coding necessary for making the macro baffles me.
View 4 Replies View RelatedI have a list of 9 values ranging from 1 to 9 generated by formulas in column A. they can only be "1,2,3,4,5,6,7,8, or 9" and can be repetitive. Is there a formula i can use (not macro please) that will show me what values are missing from the list?
Example
A B
1
4
5
1
2
1
8
7
1
*Note there are 9 values in column A in any order. In this scenario the answer i would like shown is "3,6,9".
I have a large Item sheet that also functions as an order sheet so I want another sheet to return only items actually ordered. What is the correct vlookup formula for this situation?
in sheet #1, Column A has the number of orders needed (to be filled in), column B has the name of the product, column C has the price of the product. I want to look through column A after it is filled in and return the value of all three columns only if column A has a value larger than 0 into sheet #2 in the same workbook.
I've created a Excel spreadsheet. In the Spreadsheet I've got one worksheet which has columns and list of codes.
I would like my other worksheet to look through find any products I've ordered and list them with their codes and quantities, creating a summary of just what I want so that I can e-mail just the important bits.
I'd like to create, in a single cell, what we call a "geochemical signature".
I have data that looks like this....
AreaID, Cu, Au, Pb, Zn, Sb
2, 5.1, .1, 0, 2.2, .2
3, 0, 0, .1, .2, 0
And I'd like to add a column onto the end of the table that returns a value like this...
AreaID, Cu, Au, Pb, Zn, Sb, Signature
2, 5.1, .1, 0, 2.2, .2, Cu Zn (Sb Au)
3, 0, 0, .1, .2, 0, (Zn Pb)
Such that a single cell has an ordered (ranked) list of the elements that relate to that AreaID. Also, any element with a value < 1 is returned in brackets, and elements that have a value of 0 are ignored.
I have a table with client ID in column A (range A2:A200) and qty ordered by those clients listed in column B (range B2:B200). Clients’ ID numbers range from 101 to 999.
Except through filtering, how to return the sum of quantities ordered for stores with ID number between 100 and 199 ONLY?
I was working on a chart to calculate my Amazon seller rating to see how many more perfect order I need to hit my next target grade. Here is how the calculation works.
Order with no problem gets 100 points per order
Minor problem gets 0 point
Moderate problem minus 100 points
Severe problem minus 500 points
Grade are evaluate by:
<84.5 Fair
<96.5 Good
<98.5 Very good
Above is Excellent
Total points / total orders = final grade (or percentage)
As of now i got : 53800 (points) / 624 (orders) = 86.22(%)
Now that I know what grade I've got so far and I also want to know how many more perfect orders I need to achieve my next targets or in case some bad orders come by and how far they pull me down.
Attached is my work sheet so far and I'm just missing the calculation for the orange shaded part.
Amazon seller rating calculator.xlsx‎
I am trying to create a pivot chart that show the average response times in hour but for some reason my charts looks not right. The axis show a max of 1 but the graph itself showed us up to 17. I think easier to explain if I attached the worksheet.
View 2 Replies View RelatedI've used trend lines to find the mean and average but for some reason I have not been able to set an upper and lower limit. without introducing a new column.
View 6 Replies View RelatedI have two items: Written Premium and Earned Premium. Each of these items has a forecast and actual number for two months. How can I create a line chart (with dots) that will show both of these items. I've attached a spreadsheet.
View 1 Replies View Relatedhow do you create a bar chart with values and %? Spreadsheet attached.
View 3 Replies View Related
Originally Posted by Question
Create a well labelled pie chart on a separate worksheet to show the profit made by each of the Liverpool departments to the overall profit for 2006. On the labels show the percentage contributed by each department.
I want to create a pie chart in Excel 2007. The data is not next to each other in the columns. How do I create a chart so that it includes the legends as the various departments and the data shown as the figures given under 2006?
Can you create a flow chart in excel? If yes, how?
View 9 Replies View RelatedI'm trying to loop through a worksheet where each row is an individual record. I need a macro to read the row and create a chart on a separate worksheet for that row, then move on until a chart has been created for each individual row. In English the problem is:
Read Row 1
Create chart based on row 1 data in new worksheet 1
Read Row 2
Create chart based on row 2 data in new worksheet 2
And so on