I am trying to create a summary of values based on some criteria. Here it goes, I have a list of number under a column ex 6299, 6399, 6118, 6124, 6411. I would like to create a summary table that would add all of the values associated with 6100's, 6200's etc... that are in an adjacent column. Ex. A1 is 6124 b1 is 100.00. I have tried different ways to use sumif, dsum and if but i am missing the part where the formula sees the column where the number is located then figures out if they are 6100, 6200 and so forth so it can then determine whether to add the adjacent column value. I woulld like for it to be one formula instead of two.
I have several tabs, 100 or so, and would like to have cost per West, South region etc onto a summary sheet. The summary must separate these costs per individual company per tab/worksheet. I'm looking for a formula, a macro or both to execute this work for me. The tab list grows every time i.e. new ones are set up all the time so the formula has to take this into consideration.
I've got a multi-sheet workbook and I'd like to have a summary tab of all of the tabs that have a name starting with "Site"....I have Site 123, Site 234, Site 567 and Location Listing. I've run a macro that I found on the internet and it works to copy all content to the new sheet, but, I prefer that the macro not need to be run to update the summary tab each time a change is made to one of the other sheets because this workbook is for someone that wouldn't know how to run the macro.
Every "site" sheet has the same columns, but the number of rows is different.
There will be new "site" sheets added and I want to make sure there is a way to update the summary sheet when new "sites" are added.
What is the best way to do this or is it even possible? I've attached my example workbook.Tracker.xlsx
I have a problem with a macro script I need to write (unsure where to start probably). I’m using Excel 2003. In my spreadsheet I have many worksheets (90+) and I need to copy information from specific cells (the same for each sheet, but the cell range varies each month) from any identified worksheet in the spreadsheet (the specific sheets I want to copy from will differ from month to month but are given in a list.). Then paste this data in sequential order of identified worksheet but transposed into sheet Summary. In effect this is:
1.Identify the sheet name from the ListingOrder in worksheet LISTING 2.Identify the monthly range of cells 3.Copy the data (Indicator, Month, Name and Activity) 4.Go to sheet SUMMARY 5.Go to next available cell in column A 6.Paste special, transpose 7.Loop to next sheet name in the ListingOrder 8.Undertake actions 1-7 until all relevant sheets have been copied from and pasted to Summary sheet.
The end result is as shown in the Worksheet SummaryExample – no need to worry about formatting. Samole data and SummaryExample in attached spreadsheet. Sorry I can’t offer any script at present – I’ve been trying to work it out using Vlookups etc but get the feeling it would be easier via a macro.
My boss requires me to prepare forms for vouchers that we release to our suppliers.
I encode the details manually to excel with his prescribed format. each voucher are encoded on separate sheets on one file.
Now he requires me to prepare a summary for all the voucher forms which is now becoming a pain since i now hold 50+ suppliers. and each day i encode about 120 vouchers.
I found through this forum that there is a way to automate tasks on excel like preparing a summary sheet.
I have a file which has a number of sheets each relating to a different project. Each project has a line for each milestone starting at the same row but each project has a different number of milestones.
I would like to create a summary sheet that either pulls through each row relating to a milestone from each project sheet or ideally each milestone that relates to a certain month from each project sheet (each milestone includes a completion date).
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
I'm attempting to pull the same cell ($a$1) from multiple sheets into one summary sheet, populating a column in a table.
I though I might accomplish this by putting an array formula in the desired column of my summary sheet that was similar to the following, to pull cell A1 from every sheet between the Frst Sheet and the Last Sheet.
For example:
=FirstSheet:LastSheet!:$a$1 (CTRL+SHIFT+ENTER)
This gives me #REF errors.
The values in $a$1 on each sheet are Text (addresses)
Anyway I can do this without Macros? The number of sheets between the First and Last will vary at any given time.
I am building a model for consolidating a number of different companies (possible as many as 30). I have a worksheet for each company and then a consolidated worksheet. I can create a consolidated spreadsheet that just adds all the sheets up but I would like to be able to include or not include a sheet in the consolidate worksheet through a simple yes or no cell. I saw someone do this a few years ago with a mining company where each mine had its own page and you could activate / deactivate the mine for the consolidated (but the mine page itself would be unaffected) but I can't remember how they did it.
Basically I have an Excel workbook with 6 different worksheets containing data. In each sheet I have two columns that are the same in each sheet, called "Category" (column F) and "amount" (column G). In one of the sheets I also have "Category" and "amount" in column H and I.
I want to write a VBA code that copies these columns (until blank row) and pastes them underneath eachother in the summary sheet.
A workbook with 40 sheets, each sheet has data in A:B with varying numbers of rows. A and B have headers in each sheet.
What I want to do:
Have a summary sheet in the same workbook of all the sheets in A:B
After some searching and my limited VB skills, I found a way to copy each column into the summary but to the right of the next column. I need it to be continuous in A:B
Sub Create_Summary() Application.DisplayAlerts = False On Error Resume Next Sheets("Summary").Delete Application.DisplayAlerts = True n = Application.Worksheets.Count
I have a summary sheets for my report that my department no longer wants to use. Rather they want to have a longer, more detailed version of the same thing, but rather than 1 sheet summarizing it all, they want it 1 widget, 1 sheet.
How can I have my Checksheet tab (see upload), turned into multiple tabs. In the specific example I provided, there are 10 widgets, so therefore I created the result in 10 tabs.
How can I get a macro to turn Checksheet tab into the next 10 tabs (see excel upload)?
I have attached the excel sheet of how my summary sheet is, and how it's supposed to look like.
How I can have a summary sheet that takes a number from the same cell on each sheet in my workbook and display it on the summary sheet in a list. one for each sheet.
And is it possible to create a summary page that automatically updates every time I create a new sheet? (adds the name of the sheet to the summary list (alphabetical order) and the value of the specific cell)? Excel 2007
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code: Sub SummaryCalculations() Dim lr As Long Dim i As Long Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
I have a spread sheet for my checking accounts. There are 3 sheets, BW, QW, and Chase CC. In the 1st 2 sheets row D is named "Category" and the 3rd sheet has the same name but is in column C.
How to link the 3 sheets to a summary sheet keeping track and totals of the categories ?
Example in sheet BW I have a category called "Utilities" and the column to the right of that is the amount. Then ect for other categories.
We have a weekly "On-Time" report that shows early, late, on time, or no data. Each week has a total percentage of early, late, on time, or no data deliveries. I now need a monthly total on a seperate worksheet, but for some reason I can not get the percentages to total correctly. I am attaching the spreadsheet.
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer Dim counter2 As Integer Dim id As Double Dim id2 As Double Dim palletnum As Integer
I am new to using Macros and have not had great progress building a macros to make my life easier.
What I am trying to do -In my main database tab 'FW Telecom' Use column A ( a set of numbers) to create a new tab based on that number, with a 'FW' infront IE ( column A shows 11, i want the tab to read FW 11) -I want to create one for every number in the column -Then I would like to copy my 'Template' tab to each new tab. -From there I would like to fill in the information in the new tabs from the main database tab 'FW telecom' -Since they will all be copies of the original template, i figure i can just get it to pull from the first column A and then fill in the info.
Not too much in theory going on here, just take my database and move the pertinent information to a user friendly look which I set up in 'template'
Creating a macro to compare 2 sheets in a workbook and print the differences to a 3rd sheet.
Each sheet will have the same number of fields, 5 columns with the header in the first row.
All values in the cells are integer except for the last field which will be a character.
The key is the value in the 2nd column. If it's not in the other sheet, then it's a new record. If it's a new record then highlight it a color depending on what sheet contains the new record. Now if the key is the same in both sheets, then check the other columns to see what's different. If there is a difference, print the record for both sheets in the third sheet and highlight the differences. I attached a sample of what I want.
I need to create a macro to copy the data from time sheets of different employees into the Master sheet. ie., each employee's time sheet details in to a separate sheet. If any employee fails to provide his/her time sheet details. a mail must be sent to the respective employees regarding the Time sheet submission. I am providing the sample data of my files too.
Intentionally TS_Employee5.xlsx timesheet isn't provided. In which case, I have to send a mail to the respective employee, in order to remind him about the time sheet.
Is there a way to populate a summary worksheet with the details of 4 other worksheets, all of which have the same number of columns (A:J with the labels on row 5) yet have different numbers of rows (each sheet will have a different number of rows with the data beginning on row 6 in each sheet).
Is it possible to do without running a macro so that the summary sheet will look to be automatically populated with as many rows as there are on sheet number 1, then look to be populated with as many rows as there are on sheet number 2, etc.
I am working on creating a summary page for my workbook. I want the code to create a destination sheet called Summary, then look at each sheet in the workbook, check for a value >0 in cell N7, if it is >0, the copy the tab name and the value in N7 and paste it into the destination sheet starting in cell A1(text of source tab name) and B1(dollar amount). Then move to the next sheet in the workbook and copy paste if N7 is >0 sheet name and value. It needs to skip the sheet XMOE. The Summary sheet would then create a dollar amount subtotal of the values copied from the sheets and populate it into Cell D1. Cell C1 would state "Workbook Subtotal"
I would like the code to delete any sheet where N7 = 0.
I am creating a financial summary on a worksheet and I want to be able to write up a summary about each category. Is there a way that I could write text on my worksheet and create a parameter where my text could go to the next line such as a word document?
I have a sheet that has 5 columns as shown below, xxx represents the values within the cell that I need in each sql file.
A |B | C| D| E test1|xxx|xxx|xxx|xxx| test2|xxx|xxx|xxx|xxx| test3|xxx|xxx|xxx|xxx| test4|xxx|xxx|xxx|xxx| test5|xxx|xxx|xxx|xxx|
What I am trying to do is take the context of each cell starting with B2, and place it in an Individual sql file (or text file with .sql extension) and name it A2 (so test1 in this case).
I tried creating a double for loop, one for last column, one for last row, taking each content and placing in file but I am not sure how to take the column A as the name of the file and to have 1 file per cell.
