Populate Summary Sheet With Same Cell From Multple Sheets
Jul 14, 2007
I'm attempting to pull the same cell ($a$1) from multiple sheets into one summary sheet, populating a column in a table.
I though I might accomplish this by putting an array formula in the desired column of my summary sheet that was similar to the following, to pull cell A1 from every sheet between the Frst Sheet and the Last Sheet.
For example:
=FirstSheet:LastSheet!:$a$1 (CTRL+SHIFT+ENTER)
This gives me #REF errors.
The values in $a$1 on each sheet are Text (addresses)
Anyway I can do this without Macros? The number of sheets between the First and Last will vary at any given time.
View 9 Replies
ADVERTISEMENT
Feb 20, 2014
How I can have a summary sheet that takes a number from the same cell on each sheet in my workbook and display it on the summary sheet in a list. one for each sheet.
And is it possible to create a summary page that automatically updates every time I create a new sheet? (adds the name of the sheet to the summary list (alphabetical order) and the value of the specific cell)? Excel 2007
View 14 Replies
View Related
Jul 7, 2014
refer to attached file.
I have monthly sheet Jan,Feb,Mar.....Dec.
I also have Summary Sheet, Cell A85:C96 is labeled as Jan,Feb.....Dec (Vertical) Cell B84:E84 refers to Store1,Store2,Store3 and Store4.
I need a formula to summarize the monthly value for each storein row 60.
View 2 Replies
View Related
Jan 27, 2014
I've got a multi-sheet workbook and I'd like to have a summary tab of all of the tabs that have a name starting with "Site"....I have Site 123, Site 234, Site 567 and Location Listing. I've run a macro that I found on the internet and it works to copy all content to the new sheet, but, I prefer that the macro not need to be run to update the summary tab each time a change is made to one of the other sheets because this workbook is for someone that wouldn't know how to run the macro.
Every "site" sheet has the same columns, but the number of rows is different.
There will be new "site" sheets added and I want to make sure there is a way to update the summary sheet when new "sites" are added.
What is the best way to do this or is it even possible? I've attached my example workbook.Tracker.xlsx
View 5 Replies
View Related
Sep 22, 2009
I have a problem with a macro script I need to write (unsure where to start probably). I’m using Excel 2003. In my spreadsheet I have many worksheets (90+) and I need to copy information from specific cells (the same for each sheet, but the cell range varies each month) from any identified worksheet in the spreadsheet (the specific sheets I want to copy from will differ from month to month but are given in a list.). Then paste this data in sequential order of identified worksheet but transposed into sheet Summary. In effect this is:
1.Identify the sheet name from the ListingOrder in worksheet LISTING
2.Identify the monthly range of cells
3.Copy the data (Indicator, Month, Name and Activity)
4.Go to sheet SUMMARY
5.Go to next available cell in column A
6.Paste special, transpose
7.Loop to next sheet name in the ListingOrder
8.Undertake actions 1-7 until all relevant sheets have been copied from and pasted to Summary sheet.
The end result is as shown in the Worksheet SummaryExample – no need to worry about formatting. Samole data and SummaryExample in attached spreadsheet. Sorry I can’t offer any script at present – I’ve been trying to work it out using Vlookups etc but get the feeling it would be easier via a macro.
View 2 Replies
View Related
Jan 15, 2013
I have excel file in which each sheet will be filled by a different clients (Client1, Client 2, Client 3.. Client n).
Each sheet will have two columns "Description" and "Quantity". Client will add the descriptions and quantity.
Apart from the sheets filled by clients, the file will also have a sheet called "Summary".
After all clients filled, I need all distinct "Desciption" and "Sum Quantity of that Description" in the "Summary" sheet.
[URL]
View 1 Replies
View Related
Mar 4, 2014
My boss requires me to prepare forms for vouchers that we release to our suppliers.
I encode the details manually to excel with his prescribed format. each voucher are encoded on separate sheets on one file.
Now he requires me to prepare a summary for all the voucher forms which is now becoming a pain since i now hold 50+ suppliers. and each day i encode about 120 vouchers.
I found through this forum that there is a way to automate tasks on excel like preparing a summary sheet.
View 3 Replies
View Related
May 17, 2013
I have a file which has a number of sheets each relating to a different project. Each project has a line for each milestone starting at the same row but each project has a different number of milestones.
I would like to create a summary sheet that either pulls through each row relating to a milestone from each project sheet or ideally each milestone that relates to a certain month from each project sheet (each milestone includes a completion date).
View 3 Replies
View Related
Jul 29, 2014
Is it possible to create a summary sheet that includes all the data from many sheets (in 1 workbook)?
I have a workbook with several sheets of data that I need to have combined into 1 sheet that adds all parts and adds the quantities.
Example:
Sheet 1:
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
201632130-5011EASCREEN
201632130-50332EABRACKET
Sheet 2:
201632117-5092EASPLICE ANGLE
201632120-1034EASUPPORT ASSY.
201632121-5130EAFORMED PANEL
201632130-10332EABRACKET ASSY,TOE KICK LIGHT
Sheet 3:
201632112-5011EAHINGE
201632112-5032EASUPPORT
201632117-5092EASPLICE ANGLE
Notice how there are a couple parts that occur in more than 1 sheet. Can a summary sheet combine all those parts into one master list and total the quantities for each part?
View 14 Replies
View Related
Jan 15, 2014
I am building a model for consolidating a number of different companies (possible as many as 30). I have a worksheet for each company and then a consolidated worksheet. I can create a consolidated spreadsheet that just adds all the sheets up but I would like to be able to include or not include a sheet in the consolidate worksheet through a simple yes or no cell. I saw someone do this a few years ago with a mining company where each mine had its own page and you could activate / deactivate the mine for the consolidated (but the mine page itself would be unaffected) but I can't remember how they did it.
View 1 Replies
View Related
Dec 12, 2011
I'm trying to write a formula to take data from the same cell in each of 50+ sheets and put it into a summary sheet:
On each sheet i have the total for that sheet in a cell, H11
in the summary sheet i want to list these horizontally, so total of sheet 1 into the summary sheet in D5, sheet 2 in E5, sheet 3 in F5 and so on...
Is there a way to write and copy a formula or will I have to manually amend the formula for each sheet ref?
View 3 Replies
View Related
Feb 25, 2012
Basically I have an Excel workbook with 6 different worksheets containing data. In each sheet I have two columns that are the same in each sheet, called "Category" (column F) and "amount" (column G). In one of the sheets I also have "Category" and "amount" in column H and I.
I want to write a VBA code that copies these columns (until blank row) and pastes them underneath eachother in the summary sheet.
View 9 Replies
View Related
Aug 21, 2013
Here's what I have:
A workbook with 40 sheets, each sheet has data in A:B with varying numbers of rows. A and B have headers in each sheet.
What I want to do:
Have a summary sheet in the same workbook of all the sheets in A:B
After some searching and my limited VB skills, I found a way to copy each column into the summary but to the right of the next column. I need it to be continuous in A:B
Sub Create_Summary()
Application.DisplayAlerts = False
On Error Resume Next
Sheets("Summary").Delete
Application.DisplayAlerts = True
n = Application.Worksheets.Count
[Code]...
View 4 Replies
View Related
Aug 1, 2008
How to I add data to an existing summary sheet, in a specific cells, from an unknown number of sheets?
Tickets will be generated with unknown names.
I want the summary sheet to be able pull the ticket numbers into the top row of the summary sheet, to an undefined number of sheets.
As well I would like the summary sheet to pull the job# on each ticket and the hours for each person on each ticket.
View 5 Replies
View Related
Apr 14, 2014
I have a summary sheets for my report that my department no longer wants to use. Rather they want to have a longer, more detailed version of the same thing, but rather than 1 sheet summarizing it all, they want it 1 widget, 1 sheet.
How can I have my Checksheet tab (see upload), turned into multiple tabs. In the specific example I provided, there are 10 widgets, so therefore I created the result in 10 tabs.
How can I get a macro to turn Checksheet tab into the next 10 tabs (see excel upload)?
I have attached the excel sheet of how my summary sheet is, and how it's supposed to look like.
View 6 Replies
View Related
Jun 30, 2014
I am trying to count the number of rows on sheets 11 To 2 in my workbook. I want to count the rows (excluding the header) on each sheet one at a time and place them on a "Summary" Sheet. So for example. The row count for Sheet 11 would go in cell B2 of the "Summary" Sheet. The row count for Sheet 10 would go in cell B3 on the "Summary" tab. The row count for Sheet 9 would go in cell b4 on the "Summary" Tab. I have taken a crack at the sub procedure but can't get the syntax and/or the logic correct.
Here is what I have so far:
Code:
Sub SummaryCalculations()
Dim lr As Long
Dim i As Long
Dim SheetArray(11 To 2) As Worksheet 'Sheets that the rows need to be counted on are 11,10,9,8,7,6,5,4,3 and 2
For Each ws In SheetArray
[Code] ...........
View 8 Replies
View Related
Jul 22, 2014
I have a spread sheet for my checking accounts. There are 3 sheets, BW, QW, and Chase CC. In the 1st 2 sheets row D is named "Category" and the 3rd sheet has the same name but is in column C.
How to link the 3 sheets to a summary sheet keeping track and totals of the categories ?
Example in sheet BW I have a category called "Utilities" and the column to the right of that is the amount. Then ect for other categories.
View 2 Replies
View Related
Mar 3, 2014
We have a weekly "On-Time" report that shows early, late, on time, or no data. Each week has a total percentage of early, late, on time, or no data deliveries. I now need a monthly total on a seperate worksheet, but for some reason I can not get the percentages to total correctly. I am attaching the spreadsheet.
View 3 Replies
View Related
Dec 16, 2011
I am trying to populate a blank sheet with data from multiple sheets given a certain condition.
Scenario: I have multiple columns on each sheet, but only three of interest to me. The first column has a header "Part ID", the second column header is "Description", the third column header is "QTY". I want to pull the data from all three columns to the new sheet when the QTY for that column IS NOT 0. The three columns of interest are always in Column A, B, and C.
The only thing that may make it tricky is that the data doesn't necessarily start on the first row of each sheet. For example, the headers for the first sheet are on row 17, and the headers for the second sheet are on row 5. So on and so forth...
View 3 Replies
View Related
Jul 31, 2007
Is it possible to automatically populate a summary worksheet, based on matches in other worksheets within the workbook which match a particular date?
I have a workbook with 15 worksheets--each sheet is setup like a database with 4 columns (fields). One column is for the date.
I would like to populate a summary sheet that serves as an executive summary of all "records" which match a particular date.
View 10 Replies
View Related
Dec 6, 2008
I have 52 sheets in my workbook. Is there a simple way of creating a summary page of the data contained within specific cells which are the same reference on each sheet ?
The slow way is to edit the Sheet reference in the formula, but I sense this is not the most elegant way to do it.
Sheet 1 Cell A1 = 453
Sheet 2 Cell A1 = 234
Sheet 3 Cell A1 = 543
Sheet 4 Cell A1 = 945
I start off with this formula ='sheet 1'!A$1
Copy it down my summary page, then edit the sheet reference for each page.
='sheet 1'!A$1
='sheet 2'!A$1
='sheet 3'!A$1
='sheet 4'!A$1
This is simple enough to do, but is laborious for lots of references.
View 3 Replies
View Related
Aug 18, 2013
I am trying to setup a file that has three tabs - LIST, COLOR AND PLANT.
I want to be able to select a color or colors (red, blue, yellow, green) and a plant or plants (tree, shrub, flower, grass) using radio buttons, maybe?
If i chose red and blue for a color and chose tree, shrub and grass for plants, i would like to populate the LIST tab with these items.
I'd also like to give an associated value to each color and plant. for example, for the colors, i could choose values between 1, 2 and 3. if i chose red 1, it would add "red 1" to the LIST. if i wanted to later change it to 3, i could do that on the COLOR tab and the LIST tab would update automatically.
View 6 Replies
View Related
May 3, 2012
I have a workbook that has 31 sheets representing the days in a month. Each sheet is identical to each other. The naming convention for each sheet is as follows...(1,2,3,...31). The very last sheet is named "Summary". On this sheet I have in column A the dates from the beginning of the month dragged down to the last day of the month in this format xx/xx/xx. To the right I have it equal to a particular cell (M33) corresponding to the date. So for 04/01/2012, the value in the cell to the right is (='1'!M33). Instead of repeating the process of "=" the click the next tab and get M33 on that tab....is there a faster way of doing this where I can enter a formula and drag it down pulling all the "M33" from each sheet?
View 6 Replies
View Related
Apr 27, 2014
with the attached spreadsheet?
I want to populate "selections" sheet with data from the previous sheet (it will be the date) depending on the value of a cell in column G. You will see I have already got the data from 27th April into my selections sheet but wondered if it can be done by a formula to save me copy and paste time?
View 2 Replies
View Related
May 7, 2009
In the attachment at the bottom of the page I want to count the symbols in the blue selected area when they are apear into the cells in the red selected area. The catch is that I want to treat the each of the "RED", "BLUE", "GREEN" as a single colum so to speak and have a value "1" or "0" apear in the back circled area.
Eg, For MrB there is nothing in the "RED" column (B7:D7) so that gives a value of zero in cell cell "P7". In the "BLUE" column (E7:G7) there is a circle which will give a value of "1" in cell "Q7". In the "GREEN" column (H7:I7) there is a double circle and a square symbol and that will return a value of "1".
I hope this makes sense. I have tried to do this with counta, but that will also count cells when a space bar is used and that makes it difficult to make sure that I am getting the right info. I also tried VLOOKUP and COUTIF but this is beyond my level.
View 6 Replies
View Related
Jan 20, 2010
I've information in two sections of a worksheet, columns A and B (range named "temp1") and columns D and E (range named "temp2"). I should also say that the reason I have two sections is that each section will have about 150 rows, so instead of having a huge list of 300 rows, I've tried splitting them into two sections.
AB
1a
1b
3c
DE
4d
1e
6f
What I want to do it show all the results that match the value 1 using a vlookup formula. Also the values in column A and D may change, i.e if value 4 in D1 changed to 1, I would expect to see "d" included in the results.
This is the original formula I got somewhere else which sorts out my vlookup on multiple matches issue.
View 4 Replies
View Related
Oct 22, 2007
I have some experience with excel, but until now have not ventured into VBA and macros.
I have a workbook which will have the following sheets:
1.Absence Summary sheet - Summarises data from each employee's individual sheet.
2. Template Sheet - A sheet formatted as an absence record sheet, but without data.
3. Individual employee Absence record sheets - Based on the Template sheet.
I have read with interest the various posts and help files on User Forms & Macros, but have got a bit stuck.
My Aim: ....
View 11 Replies
View Related
Apr 3, 2014
If I populate a cell from a cell on another sheet but plan on deleting the data on the other sheet is there any way to hold the result on the new sheet even if I delete where it came from?
View 3 Replies
View Related
Mar 25, 2014
I have contacts list that I made and want to take it to the next level, but don't know how. See attached.
The goal:
1. Highlight an entire row of someone's contact info (i.e. row 9)
2. Click the "ORDER FORM" text box to activate a macro that populates specific cells on the 'order form' sheet with the customer's contact information from the highlighted row. The information I want copied over is in red on the order form sheet. THAT'S IT!! (Oh, and 'paste value' the current date from H5 so that the date is static on the order sheet
If possible, I would like to have an error check in case no row is selected prior to clicking on the text box that pops up the note "Please highlight a contact row before clicking the 'Order Form' button."
View 5 Replies
View Related
Jun 3, 2007
I have a workbook in which a userform pops up which I use as an assessment form on my fitters. It goes through a series of questions on then when the submit button is clicked a sheet is added to the workbook which is named with the fitter's name and the current date - all this works fine...... what I now need to do is to create a summary page which will include basic information from each sheet in the workbook, bearing in mind that new sheets are constantly being added to the workbook.
View 9 Replies
View Related
