I work with a sheet with active columns B thru I, which get daily numeric entries. The problem is that I have to enter data in columns H & I first, then go back to B thru G. how to force the cursor to jump to column B when I tab out of I into J?
View 5 Replies
I want a macro which will move cursor to right cell of the same row when the user will press enter in a particular sheet of particular workbook. I have tried the ToolsoptionsEditmove selection after enter , but this applies to excel as a whole and needs to be change every time if another worksheet or workbook is used and thus creating difficulty.
Can this be done through a macro as I need the cursor to move to right cell only for a particular worksheet and for a particular workbook?
I have some code that unhides the next worksheet when the value 'next' is selected at the bottom of the sheet being completed.
I would like to add some code so that the new sheet is opened and the curser is placed in the first cell that needs to be completed (E5).
exist any function that do following?
I am on the row 100 in column G. I had a freeze the first row where i have hypertext and other function. I want add here (in the 1. row) something like hypertext, but i want to stay in the row where i was.
When i am on row 100 in column G and i want to create function which move my cursor to column W but in the same row (row 100 in this case).
Next time i will be in row 154 and i will want to move my cursor again in column W and use this same hypertext/function or what.
how I can move the cursor position on all visible worksheets to A1 before a workbook is saved.
View 9 Replies View Relatedthe code to get my cursor to move down 1 row or cell without it actually referencing the chosen cell.
Is there a code to make the Cursor Movement direction to be set to move Left ?
View 2 Replies View RelatedI am trying to position the cursor in a spreadsheet column based on the data within the column but am struggling with the software to do it.
What I have is:
(a) A column (A:A) containing a mix of up to 500 numbers (1 to 3 digit) and a few text entries (1 to 6 char). These form the basis of a movement log where say 100 different drivers (each with unique identity) are logged in and out, so there will be duplicates.
(b) A number of other columns logging task/times etc but the one I am interested in (B:B), contains a tick (martlet font "a") to denote the driver has departed.
What I want to do when a driver departs, is have a quick way of finding (from the top down) the row containing the drivers number (A:A) where the driver logged in, but has not yet departed (so I can tick him out!).
So from the top: find the first row (in A:A) matching a specific number/string, where B:B is also blank and position the cursor at B"x").
I have imagined a "button" with data entry at the top of the sheet being the easiest physical way of doing it but am open to offers.
Can the Cursor (or cell?) be highlighted as well, because this is not always easy to see in bright light.
I want play a trick on someone and make a button move out of the way when they try to click on it. I think that this code is from VB6.0:
Private Sub CommandButton1_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
CommandButton1.Move Rnd(100) * 4000, Rnd(100) * 4000, 1000, 1000
End Sub
In Excel, this code results in Run-time error '438': "Object doesn't support this property or method."
Is there a way to "move" a button in Excel VBA?
I have written code for a userform, and after I enter in valid data, the cursor will not move on to then next field. I cannot even click on another field with my mouse. I changed some of the code around to add validation to it, and now I am unable to move on once a valid entry has been made. If the user enters in the value "9999" the userform works just fine, it only freezes when they attempt to enter in an employee number. I've tried a few different ways to resolve this, but nothing is working. This is the code I have written.
[Code] .....
Doing a search function where the cursor is on a row some where (unknown).
I would like to move the cursor to the first column of the spreadsheet.
Is there a way to make it so when i hit enter my cursor moves 7 cells instead of 1?
View 9 Replies View Relatedto make cursor to move only on the selected cells.
E7, O21, O22, O23, O24, Z23, Z24, Z26, Z27, Z28, C26, C27, C28 ...
how can i define, in vba that after click on button in sheet1, it looks at value in cell B1 in this sheet and move my cursor exactly on this value in sheet2 where i have data in range (B4:C6000).
View 2 Replies View RelatedCan I make the cursor use only 2 columns? In other words, I know that when I scan barcode data into A1, I have the cursor automatically move to B1. BUT, once I've scanned data into B1, how do I make the cursor automatically move to A2?
View 2 Replies View RelatedI'm looking for code that will move the cursor after the "enter" key is pressed through specific cells/order listed in the code, which can be changed as required. Using the option/tools cursor movement affects all excel documents which we don't want - just the specific sheet we are working in.
View 5 Replies View RelatedI would like to change the mouse cursor when the pointer passes over (without clicking) some cells which have double-click-event script attached.
I know how to change the cursor with a custom one. The pb is for me to identifie that the pointer is over the cell so as to launch the cursor change macro (and reverse when going over another cell).
Excel does that, for ex, with commented cells but can VBA do it also?
I want to extract the following details into another collumn (bold ) from data in column B1 into C1. The information i want begins with 3 digits with a '/' then other digits follow.
M / AS308 - :308/65588 POUN
S33 / 33 - :133/01504 TR
NI101 - :101/915635 T
N101 - :101/915635
I have an auto_open macro in my workbook that sets the workbook to FullScreen. However, it also makes existing open workbooks fullscreen. Is there some way that I can leave the previously open workbooks not fullscreen (i.e. so the toolbars are still visible)?
View 3 Replies View Related I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB:
Private Sub CommandButton1_Click()
Dim f As Double
Dim t As Double
[Code].....
I have an excel sheet that has two text fields "A2" 2 digit (Month) and "B2" 2 digit (Day of week), both are currenlty in a text format. I need to force the users of this sheet to enter values in both of these fields prior to saving. Is there a simple macro that I can run to check these fields.
View 8 Replies View RelatedDoes anyone know the equivalent of CTRL (Home) to move the cursor to the a1 position in VBA? I have tried Range(cells(1,1),cells(1,1)).select but with no success
View 3 Replies View RelatedI am utilizing the following code to force the user of my database to enable macros. This is the
View 4 Replies View RelatedI have a VBA method that goes thru and calculates a bunch of stuff and puts this calculated info into a static data structure. This method is called 'setProjectInfo()'. This method is reliant on values on my worksheets, So as the user makes changes to the worksheet, I want setProjectInfo() to get called so it refreshes the data structure with updated information. I then have a bunch of helper methods to access different parts of this data structure. These helper methods are used in the formulae of a bunch of cells on a worksheet (ie '=getPercentComplete(period)', etc, etc).
This is all working well except for one thing. Sometimes the helper methods get called BEFORE setProjectInfo() gets called.. So, the helper methods return stale information. I can only get around this by manually recalculating the spreadsheet again. setProjectInfo() does enough stuff and takes a long enough time that I don't want to have to call it at the top of each helper method.
I've put the call to setProjectInfo() in a cell formula at the top of the my spreadsheet in hopes that Excel would know enough to call it first.. But that does not seem to work. Net, how can I get VBA to always call setProjectInfo() BEFORE it calls any other VBA methods?
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies View RelatedI have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
View 3 Replies View RelatedCurrently i hav list of info that is long like this.
A 1
B 2
C 3
D 4
E 5
F 6
G 7
H 8
I 9
J 10
How to move row to column example below. Because i want the data to be printed on an a4 paper which can fit around 3 row to save space . If i manually copy paste page by page it is too much.
A 1 D 4 G 7
B 2 E 5 H 8
C 3 F 6 I 9
===
Currently i have macro code which roughly does this.
A 1 B2
C3 D4
E5 F6
G7 H8
I9 J10
Sub test()
Dim rng As Range, m As Integer, c As Range
Columns("c:E").Delete
m = 2
Set rng = Range(Range("a1"), Range("a1").End(xlDown))
Set c = Range("a1")
Do While c <> ""
'MsgBox c.Address
Range(c, c.Offset(m - 1, 0)).Copy
Cells(Rows.Count, "c").End(xlUp).Offset(1, 0).PasteSpecial Transpose:=True
Set c = c.Offset(m, 0)
Loop
End Sub
I am working on the attached price proposal and need my user to be able to enter a number into column E indicating that that row should be printed on the quote. The 'quote' can be new sheet or another area of current sheet that is formatted to look like letterhead.
View 4 Replies View RelatedUsually when I select a number of cells with my cursor excel adds up the cells and shows a total on the bar. It's stopped doing this now and will only show the 1st cell showing "max=No"
View 3 Replies View RelatedI was able to input barcode reader data into A1, and automatically get the date inserted into B1. I wish the next activecell to be C1, instead of A2 as the above code is doing at the moment - so how do I alter the code above to make this happen?
View 3 Replies View Related
