Move Range To Last Cell On Another Sheet
Aug 22, 2008
Im trying to create a macro that when ran it copies all information from that row and puts it on a different worksheet. It needs to be put on the next available line in the new worksheet. and then the information deleted off the original and all rows moved up to fill in the gap. the rows all contain 2 formulas i'd like to keep specific to the row number Also it contains formulas id like to keep but change the cell numbers according to which row it is copied over to.
View 2 Replies
ADVERTISEMENT
Nov 8, 2006
I convert many large files from csv to Excel. Once I import the csv to Excel I must break the worksheet into multiple depending on when a Cell in column F is equal to a "cata" of which I do successfully with a macro.
The next step in VBA I attempt; is to go 10 cells to the right of the active cell (cata) and anchor that cell address so I may copy the range from "A1" to the anchored cell address.
I have been unable to pass the the value 10 cells to the right of the active cell. I would be grateful of any suggestions.
Here is the VBA Code I've been trying. (It bombs after it finds the cell 10 cells from the active cell.)
Sub SelectRange()
ActiveCell.Offset(0, 10).Select = EndRange
Sheets("Sheet1").Activate
Range("A1,EndRange").Select 'not working'
Selection.Cut
Sheets.Add
ActiveSheet.Paste
End Sub
View 9 Replies
View Related
Dec 5, 2012
I need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.
I found this code here:
Copy, Move and Delete Row, based on Cell Value
THE VERY FIRST CODE REPLIED IN THAT THREAD.
I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.
Basically:
Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.
Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.
View 6 Replies
View Related
Sep 26, 2007
When a task is completed I want the row wher it is in to be placed to another sheet(Archief). When in column F the value is changed to 'FIN' the row(A5 till K5 in the file I attached) has to be placed to the sheet 'Archief' below the last completed task.
View 3 Replies
View Related
Jul 2, 2008
Is there other syntax that can be used other than:
Range("A23").Select?
I'm trying to move to any cell below some text. So, it will find "Total" and move the cell below.
Also, is there any way to specify to select cells without specifying the actual cell name?
View 9 Replies
View Related
Mar 3, 2013
I am maintaining a spreadsheet to enter all my sales orders. I need a code which automatically moves the entire row to a new sheet "Completed" when the order status is selected as "Completed".
View 6 Replies
View Related
Oct 23, 2007
I would like to create a macro that could archive entries from one sheet and insert them in another. I created one but the problem is that the entry has to be the same row each time.
Example:
Sheet 1 � is current jobs and sheet 2 is old jobs.
My macro moves an entry from Row A-5 of Sheet 1 and moves it to the top of Sheet 2.
I would like to be able to scroll through each entry select it and have it moved to the top of the Old Jobs sheet.
View 9 Replies
View Related
Aug 12, 2009
I've been trying to figure out how to use a formula that would enable me to copy/copy & move a range of cells right one column if a certain criteria is met.
Basically, if a criteria is met, I want to 'copy' everything from a row to another row, but offset it by one column (so that what was in, let's say, a1 would be in b2).
I've been tinkering with index(), if() and offset() in various combinations but think I must be missing something.
View 5 Replies
View Related
Jun 19, 2014
how to move formula range without inserting any rows. For example, I have a sum(a1:a3) and I need to have sum(a2:a4). I have hundreds of these little formulas through the spreadsheet and they are driving me crazy. Is there any way I can select a block of data and have a macro simply shift all formula ranges within that block one down? Copying the formulas down and then moving the result in place of the original doesn't work as I have formulas relying on these results and I will get #REF errors. I bought an Excel VBA for dummies, but have been so swamped with work that I haven't had a chance to look at it, or even to think about where I would begin to look.
View 1 Replies
View Related
Mar 25, 2014
I have a worksheet that has time clock information. I also have a resource on the web to see some information and even export it. In the exported data it looks as follows:
A1 contains an individuals name
B1 says times i.e. "8am to 5pm"
I would like a macro that takes the data from A1 and moves it to another worksheet in the B4 position down, and take the times from B1 and move the first time to the C4 position and the last time to H4.
View 9 Replies
View Related
Jan 27, 2012
A button macro that will move the whole row of the selected cell to another sheet?
View 3 Replies
View Related
Jun 3, 2012
I have two sheets:
1. Not yet printed
2. Printed
My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:
For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.
And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.
View 1 Replies
View Related
Oct 31, 2007
situation: 3 rows of data, row 1 has HDR in several cells (always in A1).
task
1. search row one for next example of cell containing HDR, excluding cell A1.
2. IF found, create a new worksheet and move all data below and/or to the right of that cell to the new sheet.
3. Repeat steps two and three until the search does not turn up another HDR except in A1.
View 9 Replies
View Related
Oct 14, 2013
I have an excel file that contains data from bank transactions.
In column A at irregular intervals is a cell with " User Group:" It depends on how many transactions there are in a batch, could be 1 or up to say 200 as to when the next "User Group" cell is found.
After that also in column A is "Item" then "Lodgement Ref" then at the end "Batch Totals"
i.e.
User Group:
Item
Lodgement Ref
Batch Totals:
User Group:
Item
Lodgement Ref
Lodgement Ref
Lodgement Ref
Batch Totals:
I want to find each instance of "Item" then move that cell and every cell over to column CK down to and including "Batch Totals" i.e. A3401 to CK3410 to CM 3400 so it lines up with the top of the transaction block.
There are over 60,000 lines so it's worth trying to find a solution as I can then use the methodology to make other refinements in the spreadsheet.
View 9 Replies
View Related
Jun 10, 2009
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
View 3 Replies
View Related
Jan 19, 2010
I have forms and want the scrol bars to only move the form to the edge of the sheet instead of ten or mor cell beyond.
View 2 Replies
View Related
Nov 25, 2013
i am making a simple complaint tracking system and there is a column where there are two choices Resolved and Unresolved if you choose resolved it copies the row to the resolved sheet and if it's unresolved it copies the row to the unresolved sheet. i attached a template to give you an idea, i want the first complaint to be copied to the resolved sheet and second one to the unresloved sheet, i don't want the status column which contains the choices to be copied to the other sheets, also the unresolved sheet doesn't have a 'date closed' column because the complaint is not yet resolved so i dont want it to be copied there, i want it only in the resolved sheet.
[URL]
View 1 Replies
View Related
Nov 16, 2007
I'm trying to do is loop through a range of cells, and if the cell meets a condition I want to move it and 2 cells to the right of it left by one cell.
Sub MoveRangeOfCellsBasedOnCellCriteria()
Dim myrange, cell As Range
Set myrange = ActiveSheet.Range("H2", Range("H65536").End(xlUp))
For Each cell In myrange
If IsNumeric(Left(cell.Value, 1)) _
Or Left(cell.Value, 5) = "UNIT " _
Or Left(cell.Value, 4) = "THE " _
Or Left(cell.Value, 5) = "FLAT " Then
Else
cell.Range("A1:C1").Select
Selection.Cut
cell.Offset(0, -1).Range("A1").Select
ActiveSheet.Paste
cell.Offset(1, 1).Range("A1").Select
End If
Next cell
End Sub
View 7 Replies
View Related
Mar 7, 2008
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
View 8 Replies
View Related
Mar 4, 2008
I am trying to create a macro that will look in Column B for the word "RPLCASE." Whenever "RPLCASE" appears in Column B, the cells in that particular row will move over (Right) one space. I am simply trying to align the data from a file that I FTP'd from Net Term to Excel. You can see how the data should look in the 2nd example.
14-Feb-08JERRPLCASE671150536:116:56RPLCASE78308147:077:54RPLCASE89431228:228:57RPLCASE910592289:159:59RPLCASE10114732310:0010:48RPLCASE1112146811:4511:58RPLCASE12136563612:0612:56RPLCASE13144122113:0313:58RPLCASE14154642314:0114:23**********--------------TOTALS4632228LDLPKGPIK671361126:046:58PKGPIK781461247:007:56PKGPIK8963598:168:55PKGPIK9101591309:019:59PKGPIK101115113910:0010:54PKGPIK1112968711:3211:59PKGPIK121319916012:0012:59PKGPIK131412310313:0013:59PKGPIK141518716414:0014:59PKGPIK15161119715:0015:54PKGPIK16173316:3016:31**********--------------TOTALS13741178
View 9 Replies
View Related
Feb 5, 2014
I have a number of worksheets and need to move data from the same cells of each work sheet to a summary worksheet. I manually entered the cell id's for the first sheet.
Example =Jan!M6, =Jan!N7, =Jan!O9 etc.
I know I should be able to automatically enter these same cells for the remainder of my worksheets with out manually going in and typing each one (there are a lot of entries.) I just can not remember how to do it. The next sheet is named "Feb" and "Mar" etc.
View 5 Replies
View Related
May 9, 2013
I have a command button that will run paste a value in a specified cell but I also need it to check for the next open cell and paste the data if the previous cell in a specifid rage is already filled with data. Here is my code I have below. *jumps with Joy* My Range is E6 to E10
VB:
Private Sub CommandButton1_Click()
Dim f As Double
Dim t As Double
[Code].....
View 1 Replies
View Related
Apr 17, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that will move data by date from an (Entry) sheet to a (Historical) sheet. I want to enter a date in B3 on the (Entry) sheet. I then enter data into C3. What I would like to happen is when the data is entered into C3 the sheet goes and finds the same date that I entered in B3 and copies that data from C3 into Column E of the (Historical) sheet.
Test3.xlsm
View 5 Replies
View Related
Apr 16, 2014
I need to move the rows from one sheet to another sheet upon clicking the ‘Submit’ button.
I will manually update my efforts in ‘Sheet 1’ and when I click ‘Submit’, it should “copy” the rows to the next sheet (Sheet 2). However, it should not duplicate the entries irrespective of clicking Submit multiple times. Obviously, while clicking ‘Submit’ it should check the entry for that particular employee name and date in the ‘Sheet 2’ and remove that completely and update the new entries and this should avoid duplicates for that date. Every time when I add new entries for a different name and for dirrerent employee, it should keep appending the Sheet 2.
In addition, it should avoid copying the blank rows from Sheet 1 (S. No column will not be blank usually) to Sheet 2.
All this should happen upon clicking the Submit button.
View 9 Replies
View Related
Sep 24, 2013
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
View 3 Replies
View Related
Sep 24, 2009
using VBA, where if in Column I = "TRUE", move the entire row plus the 1 row underneath to sheet named "PaymentData?
View 9 Replies
View Related
Feb 12, 2014
I have an excel spreadsheet,I have a problem and I need a macro , in sheet1 I have several values of 7 numbers in a cell, example 1|2|3|4|5|6|7| up to 93|94|95|96|97|98|99|, which can be found on the columns A, B, C, D, E, F, G, H, I, and I want for example to extract all values that begin with the number 1 ,and to put all the values in the worksheet 2 columns A, B, C, D, E, F, G, H, I,,
For example 1|2|3|4|5|6|7| ,,,,,, up to 1|94|95|96|97|98|99| moved in sheet2 from sheet1.
I tried to extract the filter from the data tab .... sort and filter,,, filter,,,, filter by number,,,, starting with,,,, we apply the filter, but when we selected data values and take that were among the selected what was not good.
I like this :
column A 1|2|3|4|5|6|7| , 21|25|32|43|51|60|73|, 1|2|3|4|52|69|78| ,11|12|30|45|50|61|79| ,3|5|70|74|75|77|79| , 1|22|33|44|50|63|75|, 1|22|33|44|50|63|75|................
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| , 11|21|31|40|52|61|70| , 9|2|3|4|50|68|70| , 1|12|13|24|51|60|77| ,.........
column C 1|2|3|4|50|65|70| , 2|5|7|9|10|16|37| ,5|8|9|14|15|26|67|,,,,,,,,,,,1|94|95|96|97|98|99|.
In these columns I want to extract all values that begin with nr1 .....1|2|3|4|5|6|7|,,,1|90|91|92|93|94|95| from sheet1 in the sheet2, I mean these...
column A 1|2|3|4|5|6|7| ,1|2|3|4|52|69|78| ,1|22|33|44|50|63|75| ,1|20|31|43|55|60|71|
column B 1|2|3|4|5|6|23| , 1|2|3|4|5|6|8| , 1|2|3|4|5|6|9| , 1|2|3|4|5|6|10| ,1|12|13|24|51|60|77|
column C 1|2|3|4|50|65|70| , 1|94|95|96|97|98|99|
View 3 Replies
View Related
Nov 29, 2008
How can I code a Picture so it moves atop a excel sheet?
I dont like the behavior this code runs.
ActiveSheet.Shapes("Picture 1").Select
Selection.ShapeRange.IncrementLeft 0.75
View 10 Replies
View Related
Dec 23, 2009
i learned how to highlight a row by placing an X in a single cell, my next question is:
Is there a way (most Likely there is) By placing "J/C" into a cell, make the entire row cut and then insert itself into my second sheet on row 2? "insert into a new row and not over existing information?"
now i have done this in the past using a Macro, select the row and then by pressing ctrl+k it would cut the row and then insert it into row 2 of the second sheet.
View 14 Replies
View Related
Oct 8, 2008
I want to know the shortcut key for to move one sheet from another sheet without using mouse.
View 3 Replies
View Related
