DAVERAGE Function In Cell That Would Return Appropriate Value From Second Table
Jan 27, 2014
I'm trying to write the proper "DAVERAGE" function in cell "B2" below that would return the appropriate value from the Second table. I've used this function before but typically the "criteria" defined is specific whereas i'm hoping i can make this one simply reference the proper value in the "A" column along with the corresponding row "1". i.e. Daverage of "Tiger Wood" responses for "Q5".
I'm using the formula: =IF(G28>VLOOKUP(D28,MileageLookup,2,FALSE),G28-VLOOKUP(D28,MileageLookup,2,FALSE),"0") in my "Overage" column[H28] to look up weekly mileage limits for employees and calculate by how much(if any) the "Actual Mileage"[G28] exceeds this limit. If there is no overage for the employee that week, I've asked it to return a 0 so that the next column can use this result to calculate the "Overage Charge"[I28] which based on a rate in the MileageLookup table. Both formulae are working properly.
The problem comes when I try to use the DAVERAGE and DMIN functions on the "Overage" column. Excel doesn't seem to recognize that the 0's are actually legitimate zero values and not just some sort of place holder even though it calculates the "overage charge" properly and recognizes the 0's.
I am trying to return a TRUE or FALSE based on a date in a cell.
for example:
if cell A1 = 07/11/2009
I want A2 to show TRUE or FALSE if A1 is 14 days or more behind todays date.
I have tried stuff like:
=IF(A1=TODAY()-14,"True","False")
but it just always says false. EDIT: I have just noticed that if I change the date in A1 to exactly 14 days behind todays, it returns TRUE. So, it does work. Do I need to add a GREATER THAN in there?
I am trying to write a function that will return the value in cell B based on its position adjacent to cell A (above). Cell A contains its own formula and may the values may change.
I'm trying to create a user-defined function, but the function needs to know what cell it has been placed in. I want to use this cell reference to get some other offset values. I can easily find out offset values based on the ActiveCell, but not for those offset values based on where the UDF is actually placed, which could be almost anywhere on the worksheet.
I have a pivot table which I am interested in filtering in several different ways. The table contains a category for AREA on the Y axis and BLOCKS on the X axis. When unfiltered the tables displays AREA 1,2, and 3 and has a full list of parts. I can then filter the table by AREA to look at one area specifically, and when I do the BLOCKS list shrinks to only those which correspond to that specific AREA.
My problem is that I want to be able to reference on another sheet the value that corresponds to AREA 1 Total regardless of whether the table is filtered to only AREA 1 or if it is unfiltered. I cannot just reference the cell because AREA 1 Total is in a different cell when unfiltered then when filtered. Is there any way to do this?
For example if I were to take the data in cells d3($358), d4($321), d5($130), d6($82) and skip a cell to now make the same data into cells d3, d5, d7, d9. Next, the data in cells f3, f4, f5, f6 would be merge into the blank cells of d4, d6, d8, d10.
The final result would look like column B. I have over two years of sales data in two separate columns that I need to merged into one column. Is there easier way without a simple cut and paste one cell at a time as this would take an enormous amount of time to complete? I’m not that good with VBA codes so a formula works good, but if VBA is the way to go then tell how to enter it on my worksheet.
I am performing a lookup using the populare user defined function nlookup, which does not take a lookuparray argument to find lookup values. But I only want to return lookup values that fall into a certain array. To accomplish this, I figured out that I need a way to specify a condition of the type "if cell address of lookup value falls within range"
It should be possible if I find a way to return the cell address of the nlookup value, but as nlookup is not limited by a lookuparray argument, so I was not able to use the address/index/match that come up in similar questions.
Assume you have a rectangular range. Say A1:M18. There are values in some random cells (any number of cells) within the range. The rest of cells are blank. In cell M19 (ie cell below the bottom right corner of the range), I need a excel function that returns the nearest (ie physical location) non blank cell value. I have searched the internet for weeks. The closest formula is the following (see below) but it is flawed as it returns zero if there are values in rows below the row of the nearest cell with non blank...and also zero if there is value in a column greater than the column of the nearest cell with non blank.
Closest formula so far: INDEX(A1:M18,LARGE(IF(ISBLANK(A1:M18),"",ROW(A1:M18)),1)-ROW(A1:M18)+1,LARGE(IF(ISBLANK(A1:M18),"",COLUMN(A1:M18)),1)-COLUMN(A1:M18)+1).
And the function should be relative not absolute as the range can be extended..but the location of the formula remain same relative to the array size. (ie. always at below the right bottom cell).
NOTE: Ignore the special case where two non blank cells are the nearest. That will not happen.
I am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
I'm trying to get a "simple" function to return a number and not the #NAME?error!
I'm writing the following vba code. It's located in the sheet1 vba code area.
On the spreadsheet itself, on sheet1, column C, there is data from row 1 down to row 55. I have tried formatting the Column as General, text,etc.
Function Asset() As String Asset = Range("C1").End(xlDown).Row End Function
When I type into the spreadsheet =Asset() , I get the #NAME? instead of the number 55. When I step through in debug mode, Asset shows Asset="55" , but my function doesn't return it!
I am trying to use a function to look at the value in one cell and return a value to the cell with the functional equation. I think I use the "IF" Function. But it is a little more complicated than I can do. In my sheet, there is a number in D3. I want to create an equation in D4 that evaluates the value in D3. If D3 is between 0 and 100, I want the equation in D4 to return the value 1; If D3 is greater than 100 but less than or equal to 200, I want D4 value to be 2; if D3 greater than 200 but less than or equal to 300, D4 return 4. I would like this to continue in increments of 100 until D4 equals 10.
When I try a MATCH function, I substituted the range through the ADDRESS function. But, it returns #VALUE error. When I manually typed the same range address, it produces the results. I've been behind this more than 8 hours still I can resist the heat on my cool head! But, I thought you coolest head guys need some heat to warm up for to-day's challenge.
The function must be present in all 99 rows to accommodate potential data, but there is rarely enough data to populate the entire sheet, leaving #REF! errors in some cells. Putting aside that using this many array formulae is sloppy programming, how do I craft the function above to return no value if the function evaluates to an #REF! error?
I am trying to use the IF function to return a false value if the combined sum of a row is not the same as either of the 1st 2 cells. If that makes any sense!
This is the formula I would like to use. =IF(SUM(g3:g9)=g1 or g2 then y if true and x if false. I thought it would be easy but I can't figure out how to do it
I have following snippet of code. it is very simple.
Code: Sub GetDatafromXmlToTemp() Dim str As String Sheets("sheet1").Select desc = WorksheetFunction.Match("FAMILY_ID", Rows("1:1"), 0) ' gives column number for ex 4 for "D"
[Code] .....
I am getting error "Argument not optional" in line.
The function "VAL" will return the value of a numerical string as a double. Is it possible to get a similar function that will return the value as a long.
New to creating macro's but looking for a macro or a function to get the below results. The first 2 columns are givens and looking to return the 3rd column. Is there any code that can do this?
I have a cell with a text string >3, and would like it to return the number (not text) 3. I could use Right but since the number will not only be single digit I don't think this will work.
I've searched for an example of function that returns a variable, however, I'm unable to find one other than the one just has return variable on the end. I was wondering what I have wrong in the following code. This is placed in a module to make it available to all my worksheets.
Public Function findLR(Worksheet, Column) As Integer LR = Worksheet.Cells(Rows.count, Column).End(xlUp).Row return LR End Function
I am looking for a formula that will yield the following: IFAH9>AI9 return the word Green, IFAH9=AI9 return the word Blue, IFAH9<AI9 return the word Yellow. If AI9 is blank stay blank.
I uploaded a simplified version of the workbook I'm manipulating for reference. I'm looking for a formula where I can get the ROW heading of a table to be returned based on the max value of a certain column. My column headings in the table are months. I have separate place in the workbook where I have the Months listed in a Column (A9:A......) and in Cells (B9:B....) I want to return the row heading name from the table. The tricky part is that the column headings don't always stay in same place, so Jan isn't always in A1, sometimes it is in B1 or C1 of the table.
Essentially from my months listed is separate part of the workbook. In the cell next to each month I want to match that month with column in the table. In that column find the max value and return the row heading.
I am attempting to return a value in a table using an IF statement, but without referring to other values in the table.
My first column contains price break quantities; 5 10 20 50 70 100
The top row contains selling quantities; 1410192541517699105
The IF statement should return a "Y" in the cell if the value in the top row is greater than the value in the first column, but only for the relevant price break, i.e. the column with 51 in the first row should only have a "Y" in the row with 50. This would be much easier if I could work out how to post the workbook!
The formula cannot refer to other row values (otherwise it would be easy), and cannot use VB.
The function Hlookup returns #N/A(?) if the value I'm looking for is not found. Is it possible to change this return-value. For exampel to #No or #No value ? I suppose I then need the code of this function? And I cannot get it?
