I have a column with 3 different types of data in 30000 cells in Column A (Example model attached). This contains data types (i) Alpha Numeric Data (ii) Numbers only (iii) email ids
Unique identifiers for the above 3 are:
(i) Alpha numberic data : ABC
(ii) Numbers only : 1375
(iii) email ids : @
seggregate these data into 3 different columns.
I created a macro for data segregation and extraction.
My currently flow is:create new worksheets rename the worksheets to e.g., sheet1 to product1, sheet2 to product2, etc manually filter the main data sheet, copy and paste the data into the respective sheets.
How to i edit the codes to allow the renaming of the worksheets to be non-static?
Meaning it doesn't have to be sheet1 to product1, sheet2 to product2
I can have sheet3 to product1, sheet4 to product2 or sheet7 to product1, sheet8 to product2
I feel that my method of data segregation and extraction is kind of rigid. is there any methods i can make it to be more fluid/dynamic?
I'm looking for the below requirement:
Name
Date
Sales1
Sales2
Daniel
01/18/11
4,907.00
2,038.00
[Code] ..........
Required output....
Name
Date
Sales1
Sales2
Name
Date
Sales1
Sales2
[Code] ......
Need macro code to segregate the data...
I have a problem with the attached spreadsheet. I have certain letters (A,B,C etc.) that are shipped to various regions. I would like to have a count on top to count the total number of orders, but one that also counts the total number of unique orders. However, this unique count has to be dynamic and must be able to adjust accordingly to the filters (by default, if no other filters are applied, should be 15). For example, if I apply the "Ship To" filter to Canada, the total number should be 19, but the unique count should be 12. If I change the "Ship To" filter to US, the total number should be 9, and the unique count should be 7. I've tried to use the advanced filters but if I apply the unique entries filter, it is only a one time calculation. Also, the advanced filter gets rid of my other filters.
View 5 Replies View RelatedI have a spreadsheet with data in every other column (i.e. A, C, E, etc.). I am using the "filter" option in Excel on the aforementioned range of cells although the little filter icon shows up on all columsn, including the blank columns in between my data. Is there a way to only have the filters show up on the columns with data?
View 2 Replies View RelatedHere in "Grade" Column wants put a formula so that it will show First,Second,third and Fail. If the Mark is more than or equal 40 but less than 50 will reflect Third,if the mark is more than or equals to 50 and less than 60 will reflect Second, if the mark is more than or equals to 60 will reflect First and remaining less than 40 will reflect fail.
View 2 Replies View RelatedI have a row of sub-headings at row 12 that require Sort Filters. My problem is that I need the filters on selected columns only. It seems that with the standard filter button I get all or nothing.
View 8 Replies View RelatedUse filter for 2 columns of a CSV file, column A and Column B for certain words. Say I apply a text filter: contains "word1" or contains "word2" to Column A. Then I get the results. After that, I remove the filter to Column A then apply the same filter to Column B. The thing is, I don't get the results in Column B, instead, I get the cells in Column A wherein Column B is filtered PHOTOS BELOW:
The data that I get for this filter are:
And Word1 you
Word2 is blank
Apply filter to Column B, get the cells filtered in Column A:
The data that get for this filter are from Column A (which are cells filtered from Column B filter)
And Word1 you
Is the blah
Word is all
The results should in a single Column for both filter:
I have more than 100 files that needs to filtered this way, is there any way I can do this automatically?
Here is what the file looks like:
The results I hope would be possible:
Automatically without having to open all the files and have the results of all of it in 1 single Excel file?
----or----
If the above is not possible, open each file and automatically apply the filter into a column in just 1 click and without having to type the same filter for each column.
I found a code to combine all CSV files into 1 Excel file, but half of my files has more than 500k rows and the Excel's limit for rows is around 1million+.
I have a question, I have a pivottable with data (only numbers as values). In this pivot there is a report filter which filters current month and last month. Is it possible for the pivot to show the data as a difference between current month and this month and if so where to start with the vba code to let it substract from each other?
View 6 Replies View RelatedI have an excel sheet with about 3,000 products listed; there are 26 items of data listed against each.
I've been using Data Filters to manipulate the info, but my worksheet has suddenly started running incredibly slowly - up to 7 minutes to implement a simple filter selection.
There was no problem until I made a couple of changes last week:
1. Adding a simple pivot table
2. Using an Index column plus some linked formulae to extract a list of suppliers from the product list.
I assumed that it may be the INDEX and related formulae or the pivot table that were causing the Data Filters to run slow, so I deleted them, but to no effect. I've even gone so far as to copy the raw data into a new sheet, but it's still running incredibly slowly when I try to filter. I am convinced that the problem is related to some hidden legacy of the table or functions, as it only started once I'd added these, but I don't know if this is plausible in reality and if so how to get rid of it.
I currently have almost 20,000 rows of data and I am filting down to a particular value in column D. However, as the filter runs you can see that after it finds the fields it keeps running like it should to the end to make sure there are no additional values. Is there some faster way to search this many lines? Would it be faster to sort the worksheet first and then do something with a sorted worksheet or what are my other options?
I m importing data and I have not seen anything remotely similar in any previous posts. I need to import data using an array for the different filter parameters. The size of the array will vary. The underlying problem is that VBE appears to limit the number of characters that are allowed across one row. If the array size is only one the code works fine - any larger and it crashes.
Sub ImportDataWeek()
Dim state As String
Dim Test As String
Dim NewStatement As String
Dim restate As String
Dim i As Integer
state = ""
For i = 1 To (UBound(TestType) - 1)
Test = "(qryDataRawValues.Test= '" & TestType(i) & "') AND (qryDataRawValues.Prod_ID= " & ProdID & ") OR "
state = state + Test
Next i
NewStatement = Mid(state, 1, Len(state) - 3)
restate = "WHERE " & NewStatement
Sheets("RawData").Select.....................
I am working on a complicated macro. The macro is suppose to move certain data set to a specific worksheet if an if statement is "True."
As of now the macro, inserts the row into a new sheet but it is inserted into Row 1. My data set is in Sheet A is up to Column U and I want it to be inserted in Column B on Sheet B. The code below inserts the entire row into Sheet B starting with column a.
[Code] ........
This variation of the code moves the entire data set from Sheet A to Sheet B and inserts it in Column B as wanted, but it does NOT follow the Criteria of "true", it brings the entire data set even those with "False".
[Code] ..........
PIVOT TABLES -- Old data remains in pivot table filters
One more Pivot Table Question:
I have workbooks i have built and re-use with fresh data after verifying that the previous data has been cleared. Unfortunately there are times in the drop down filter, old data will remain, but is not at all in the data set. How to clear this out? I have ensured that before pasting in new data the old data has been cleared below the headers. I keep my headers so I don't need to re-do the Pivot Tables or adjust the Name / SUM capabilities in the VALUE FIELD SETTINGS.
I have a pivot table whose 'output' (databodyrange?) is a nice, rectangular, 2D array. The table has many filters, each with many possible selections.
I'd like to write a function, whose parameters are the filter selections and the pivot table/data, that outputs the corresponding 2D array.
e.g. I'd call it with something like myFunction(args that determine the filter selections, myPivotTable)
Is this possible without calls to a macro? If so, how? If not, where should i look?
the following code filters data and copies to worksheets specified in code, can this code be shortened to make the macro run faster. Also in my second criteria how can I put "Contains "PT2" in the criteria as nothing happens when i run the macro, is *PT2?
With shtRec
.AutoFilterMode = False
.Range("A7").AutoFilter Field:=8, Criteria1:="LEHMAN", Operator:=xlAnd
With .AutoFilter.Range
On Error Resume Next
Set rng = .Resize(.Rows.Count - 1).Offset(1).SpecialCells(12)
On Error GoTo 0
End With
If rng Is Nothing Then
MsgBox "No data to copy"
Else
rng.Copy shtLehman.Range("A6")
End If
.AutoFilterMode = False
End With
I have 3 pivot tables and with 3 filters each (they are all the same filters). I just want to change 1 of the filters for each of the pivot table (meaning the other 2 stay the same for all of the pivots). Is it possible to have a filter change automatically to match a filter in another pivot?
View 9 Replies View Relatedis it possible to use two filters within a the same field.
ie. right now i can filter using the top 10 based on a value field.
what if i want to see the top 10 customers profit and along any drop in revenue from previous years..
something like this.
the information below was copied out of a pivot table that included the % difference.
Code and Name
YearCheck
Profit
Difference
[Code].....
I have a worksheet that is unprotected but I am unable to apply filters to it. The option is greyed out if I try and select autofilters.
Another strange thing is that on one of the worksheets when I select Data, Filters there is a tick to the left of Autofilter but it is also greyed out, so in effect I cannot turn it off even tho I can't see the filters!
I have tried to popst a screen shot but unsure how to do it. I think maybe a screen shot would help to explain my issue better so if anyone knows how to do this......
Let's say that A1:C5 looks like this:
Square Red $5
A2 is empty Blue $6
A3 is empty Orange $2
Circle Puple $10
A5 is empty Black $18
A2 and A3 could say "Square" and A5 could say "Circle" ... this is just how I have it set up right now.
In C1 I have a drop down list ... a list of "Square" and "Cirlce".
***QUESTION***
Is there a way for a user to select "square" from the drop down list and in D1 have excel populate a list of all the Squares colors and prices?
Example of what excel would populate in D1:E3:
Red $5
Blue $6
Orange $2
The thing is that I don't think filters is the answer. The reason being is that I want the user to be able to select the item from the list and have excel automatically populate the information. The user should not have to filter the list manually.
In my Sheet I have AutoFilter on multiple columns.
I want to view all rows where in different colomns there are values.
For example
Colomn D, Row 6 has a value
Colomn E, Row 6 has no value, But Colomn E, Row 7 has a value.
I want to view then Row 6 and 7, by setting an OR filter 9 or something like that .
by setting filter on Colomn D with ( not empty Cell ) and Filter on Colomn E with (not empty Cell ) it is only a AND function.
How can I get an OR function. ( Colomn D OR Colomn E )?
I'm trying to modify this code in order to do the following.
I want to choose first column and then the criteria for filter, then i want to choose a second column and criteria to filter the remain values from the first filter.
Here is my
Sub Filter()
Dim Myrange As Range
Dim CriteriaVal As Variant
Dim CriteriaVal2 As Variant
Dim KillColumn As Integer
Dim KillColumn2 As Integer
Dim ActiveColumn As String
Dim AC
Dim LastRow As Long
Dim rng As Range
I have several pagefields. Once something particular has been selected in one of them, I would like the remaining options in the other pagefields to be updated or refreshed showing only those where there is a correlation with the selected pagefield. In other words, exactly how your typical Excel filter works.
I assume there is no option to change the way pagefields interact to be like filters. How could this be done in VBA?
First post so please excuse me if this has been covered before but I am trying to get the results of a dropdown menu in one worksheet to become the criteria for a filter in another worksheet (both in teh same workbook).
I thought I could just add a reference to the dropdown cell into the autofilter (in VBA editor) but it doe't seem to be that simple.
Any ideas?
I am using Excel 2007. I have a list of 100 names all ranked from 1-100. Is there a way to create a macro that can filter out the top 20, a specific name and also any names with the cell colours blue and yellow?
At the moment using an advanced filter based on criteria I can filter out the top 20 and the specific name I want but can't work out how to leave the coloured rows in as well.
Subtotal doesn't add cells hidden under a filter column but it does when grouping. How can I get groups to change a subtotal based on whether they are hidden or not. What I'm really trying to do is use conditional formatting to change the format when a group is expanded vs collapsed.
View 3 Replies View RelatedI'm creating a spreadsheet with data I've exported from a survey.
My data begins column headings on row 10 and spans across several columns. I've applied filters to the headings.
Above column 10 I have some summary data using the countif and counta functions. Is there away to have my summary fields change as I apply my filters to the main body of data in different ways?
I need to apply filters based on 2 criteria
Filter1Dropdown SelectionFilter2Dropdown SelectionHeader1Header2Header3Header4Header5Header6
Depending on what is selected in Filter 1, lets say it applies to column F and i get a data set
Now with the filtered dataset of Filter 1, I should be able to apply Filter 2 or vice versa.
Also at the end, I need to release all filters so that i can see the entire data set.
Is it possible to create independent filters. I have data for five departments and sales for different quarters of the years. These sales for the different quarters are independent. But If I select Q1 for first department and Q2 for second department it do not give me the result that I seek i.e. sales for first department for Q1 and Sales for second department for Q2.
View 9 Replies View RelatedAre there any events associated with filters?
If I have two sheets of data, where column A is NAME and column B is GRADE. Sheet1 is MATH and Sheet2 is ENGLISH. The same students are taking both classes.
Is there a way to make it so that when I filter by GRADE in tab 1, tab 2 is ALSO filtered by the same selection?