I want cell B4 on sheet 3, to show the value of cell B4 on sheet one ... only if there is a value in B4 on sheet one then i want the rest of row 4 to be copied to sheet 3 also.
HOWEVER if the value in cell B4 sheet 1 is BLANK/EMPTY then i want the full row to be over looked and the next row to be checked (B5 all the way to B30)
Once B4-30 on Sheet 1 has been checked and only the rows showing a data/value have been copied to sheet 3, i then want the same process to start again on sheet 2 - Again only the rows showing data/values to be copied.
I need a formula that displays the word "Day" or "Days" depending on cell entry i know the formlula =IF((B12)>0,"Day","") to show the word day but i want it to show "day" if a 1 is entered or "days" if any number over 1 is entered.
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
I can't get the zero's to show up in the part number formula in the wooksheet. Also how do you get the zero's to stay when you type numbers such as (03,04,ect.) the zero always disapears. I need it to stay as a number and not text.
why formula's I type in to a particular worksheet show all the time(this is a workbook containing numerous macro's). I have checked under 'Options' that the show formula's box is not checked
I created a formula in a cell and it worked fine but then I created the same formula in the cell just below it and I changed some of the numbers and when I hit the enter button the formula showed up in the cell and not the final result which would be the answer to the formula. Does anyone know why it would do this? I have an example below....
I have a spreadsheet (attached) that has a formula, which calculates the number of days between two dates if another field contains data. My problem is that when I chart the data, it isn't showing up in the chart. Cell G1 (Tab 1) contains a 1 because the document was returned 1 day late. This isn't showing up on the Chart (Tab 2).
I have the formula (found in cell "C2") on the Report sheet. I need to perform a function, but I cannot get it to work on the sheet I need to pull information from. The sheet RecapWk12 has a small section pasted (with some cells edited for obvious reasons) from the actual workbook. I can get the formula in Report cell (A10) to work on pulling information from sheet2. You can see I am getting (#REF!) in cell C2.
I'm trying to have a fixed date entered into column B when data is entered into column D. Here's the formula in column B:
=IF(D3="", IF(B3=";", FixedDate(),B3))
When I enter data into cell D, I get the following result in B:
0-Jan-00
Taking this a step further, even if I do a "control + ;" I still get a value of 0-Jan-00 in the cell but the formula bar shows me "=1/9/2007'. ??
I've gone through all of the options but cannot fix this error. I have two spreadsheets using this formula. The first one worked fine last year but now I have this error in it. I also started to create a new sheet and still have the same error.
I have a formula in a cell and when I use the formula bar it shows me the correct answer but it doesn't show me it in the worksheet. Only the formula shows up.
The same formula could be another place in my worksheet and work fine.
I have tried changing format. Copying formula from another location and changing the information to fit my needs it won't show me the result.
I was given this Formula to use in a cell to calculate the total hours from 2 different cells, from inputting date and time from and to dates..as an example from 4/1/14 0:00 thru 4/1/14 12:00.....The problem I am encountering is that when the spreadsheet is 1st opened "+1" is visible in the cell where this formula is. I am asking how the formula can be altered to have the "+1" not visible in the cell before any date and time is entered.
I have a formula that looks up a chart showing scores referenced against each other as shown below. (Scaled down version) ******** ******************** ************************************************************************>Microsoft Excel - Table Template.xls___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1B1C1D1E1= ABCDE12006-2007Altofts JnrsCarleton JnrsEmpire ColtsHemsworth Terriers2Altofts Jnrs- 3Carleton Jnrs12-3-4-0 4Empire Colts - 5Hemsworth Terriers -Results [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
The problem is when the score is i.e. 12-3 the formula is only looking at 2-3. Hence this actually then shows as a defeat. The formula causing this problen is an array and shown as =SUM(IF(NOT(ISERROR(LEFT(resultsHome,FIND("-",resultsHome)-1))), --(LEFT(Results!$B3:$K3,FIND("-",Results!$B3:$K3)-1)>MID(Results!$B3:$K3,FIND("-",Results!$B3:$K3)+1,9)))) Question. How can the formula be changed to reflect scores like 12-3 to be shown as a home win............. .
I Spoke too soon here, I am getting value errors, how to do it with conditional formating. I tried if cell value is =to #DIV/0! then white (dosent work). Richard this dosent seem to work mate =IF(SUM(F6:V6),"",AL6/SUM(F6:V6))
I've created a simple dynamic chart using a combination of data validation and an index match match formula. Every time the user makes a choice the chart updates with the right info. However is there a way to create a choice where the user can show *all* the choices at once on the chart ?
If you look at the attached file in Column E line 47 you will see that it displays 373.97. However if you look in the formula bar it shows 373.9694. I am trying to make it so that the formula bar shows the same number as in the cell. Any idea on how to do this? I have tried everything I know how to do, which is not much.
Creating a working userform that takes data input from the user and puts it onto a spread sheet.
That data is then used to calculate a result (via the spreadsheet), and I want that result to show on the userform when the data is submitted (if that makes sense?)
Every week, in row 3 i enter the number of boards cut. In row 9 i want a running total, but until this weeks total is entered, i dont want anything to show. This is the data for a bar chart which i print off every week. Next week is week 3 and i will enter the data in cell d3. When i do i want cell d9 to show the new total of B3,C3,D3. And so on each week.
I know I will earn $5,000 of monthly revenue from a client. $5,000 is represented in a monthly revenue cell. I have 12 columns showing the 12 months of the year. There is an additional cell showing the customers implementation date.
If a company's implementation date is on or after the 15th of the month (example: 3/28/2014) then the next month (April 2014) is skipped and the $5,000 is returned to columns May through December. All months prior to May return $0.00. If the implementation date is before the 15th day of the month (example: 3/13/2014) then the next month (April 2014) and all months after will return $5,000. All months including March and prior must return $0.00. If the implementation date is unknown then 12/31/2099 would be in the implementation date cell and $0.00 is returned for all 12 months.
Essentially, if the implementation date is prior to the 15th of the month the revenue will show as of the following month. If the implementation date is on or after the 15th of the month the revenue skips the following month and will show the month after.
The drop down validation feature on my sheet isn't working. I have treble checked that the boxes for data validation have been correctly done. In another sheet the same data validation feature is working? Can anyone suggest a reason for this?
If you are stumped I can post a snippet of the offending sheet.
In a particular CSV Excel file I want to populate "Description" column with a HTML template Code by merging 3 columns of HTML. The HTML has almost 20,000 characters. Now before merging and after merging when I copy paste the HTML in any cell it doesn't show all the code that I have copied. and when I merge all the 3 columns. a lot of HTML data seems to be missing. I think excel has some sort of limit and it is not allowing all these 20,000 characters merged and combined in 1 cell. I am stuck at this point and can't upload the CSV as the HTML is missing a lot of coding.
I've attached a chart with variance data for each month of the year. I've used an IF formula to "NA" the months with no data, so nothing shows up in the chart. However, I would like to know if it's possible to have the chart only show months with data. The IF formula gets rid of the data point but it doesn't prevent the chart from showing the month on the X axis. In the attached file I manually selected the three months with data.
I have a basic knowledge of spreadsheets, involving typical business needs (Average, Sum, And, Or, Logical Operators) but after roughly 35 minutes searching for a simple solution I'm stumped.
If I was to calculate the most popular (lets say fruit), I know it would be the MAX function, but what would the formula to show the Name of the most popular fruit and not just the amount of sales?
I have about 10 pivot tables that only have one Pivot Field Item Selected (i.e., Jane Smith) with dates as column fields and a sum for data items. Everytime I refresh the pivot tables and there is a new person in the data tab (which is the data the pivot table is referenced to), the new name populates in the pivot table. I am sure I could include all of the names in one pivot table, but there is a long explanation why I only keep one name per pivot table in this particular workbook.
Attached is an example. As you can see, when you refresh the pivot table, the new name (Jason Smith) which I added to the data tab, will be included in the pivot table.
I am trying to figure out if there is way either with VBA or without VBA to prevent all of the pivot tables in the workbook to not select any new Pivot Field Items when I refresh the pivot tables.
I recorded a macro to open the Form on the Data Menu. Sample Worksheet Attached. After starting the macro recorder I selected the Food table cell (located to the right on the worksheet). Then went to the Menu bar.... Data Forms... and Clicked new.... followed by close and then stopped the macro Recorder. It produced the following code.... which reflects a code error when run.
Sub McrEnterFood() ' ' McrEnterFood Macro ' Macro recorded 20/01/2010
Range("P1:U16").Select ActiveSheet.ShowDataForm End Sub