I have about 20 excel files which needs to be copied to an Access Database. Each file has about 15 tabs. I need a macro which can copy the data from excel to access. I need all the data to go in one table. The data in excel also needs to be transposed before it is copied to access
View 4 RepliesI'm in need of serious help, extremely new.
I have created a userform in excel which I want to transfer data over to access with.
I have built a command button to send data to access code below.
Private Sub CommandButton2_Click()
Dim cn As ADODB.Connection, rs As ADODB.Recordset
Set cn = New ADODB.Connection
cn.Open "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=filepath.mdb"
Set rs = New ADODB.Recordset
rs.Open "Main", cn, adOpenKeyset, adLockOptimistic
With rs
.AddNew
.Fields("Status") = ComboBox1.Value
.Fields("RRR") = ComboBox46.Value
.Fields("RRS") = ComboBox52.Value
.Fields("SRR") = ComboBox47.Value
.Fields("SRS") = ComboBox53.Value
.Fields("WSR") = ComboBox48.Value
.Fields("WSS") = ComboBox108.Value
.Fields("WPR") = ComboBox110.Value
.Fields("WPS") = ComboBox112.Value
.Fields("WER") = ComboBox49.Value
.Fields("WES") = ComboBox54.Value
.Update
End With
rs.Close
Set rs = Nothing
cn.Close
Set cn = Nothing
This works fine when all comboboxes and textboxes have entries in but doesn't work when the have been left blank and there will be occasions when they can be left blank.
I am doing data entry spreadsheet here where the information gets manually input into a spreadsheet and then when the user clicks a button, it transfers it to a the Access database.
This was done by my predecessor but i had to modify it which has now given me a "Run-time error '3061', Too few parameters. Expected 1".
My code is below:
Private Sub SaveandExport_Click()
Dim db As Access.Application
Dim TB As DAO.Database
Dim Intro As String
Dim Tabelle, GName, VarList, TaName
Dim i As Integer
Set db = CreateObject("Access.Application") ' create Access object
[code]...
I have a macro that creates a table in Excel. The problem is the table will be MUCH bigger than 65,000 lines. So what I'd like to do is once the table gets to a certain size append the data to a Access DB. (Or whatever works)
Then continue running the macro.
Clear Table, Rinse, Repeat.
The "Output" Page of the Macro looks just like the DB would.
For example if I only wanted one instance I could run (part of) macro. Save Excel.
Open Access
Do an ImportTable
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
BDD LIMITED
3 Telford Place
L*****r QLD 4315
Phone: 07 5777 3622
I am Generating Excel file with Macro using my asp.net (c#) application.
I am able to generate Excel file in development environment, but in Production it gives following error:
"Programmatic access to Visual Basic Project is not trusted Line: Microsoft Office Excel"
I did googling a bit and found that I have to open Excel file physically make few security related changes in macro as below.
1. Open the Office application in question. On the Tools menu, click Macro, and then click Security to open the Macro Security dialog box.
2. On the Trusted Sources tab, click to select the Trust access to Visual Basic Project check box to turn on access.
3. Click OK to apply the setting. You may need to restart the application for the code to run properly if you automate from a Component Object Model (COM) add-in or template.
Can i do above changes at runtime (using some code)?
I created a slick little excel sheet with the data coming in automatically via Access query. It has been working fine for months. Now all of the sudden there are a bunch of cells with missing data. The weird part is it's not as if whole columns are missing data, more like 90% missing. When I go to Access and run the query all cells are populated as the should be. There have been no changes to the query at all during this time.
btw...I am running Office 2010
I have a spread with five tabs. Each tab is a person's job responsibilties for numerous properties. Each person works with a property called Orange Avenue. I want to create a tab for JUST Orange Avenue items but want it to automatically pull any and all info from each tab where that person's Ornage Avenue duties are.
cells(a,b):cells(a+4,b) have 1,9,9,0,5
cells(a,b+3):clells(a+4,b+3) have 1,9,0,emtpy,empty.
how to fill 9,5 to empty cells.
I am using the statement
Code:
Sheets("Sheet1").Range("A6").CopyFromRecordset rs
to populate columns A through to F. These records come from an Access database.
In column H through to L, content is being written for each record.
For example columns A to C are dynamic and H to I are static
A
B
C
H
I
1
Record 1
Some data 1
Some data 3
Manually entered data 1
Manually entered data 3
2
Record 2
Some data 2
Some data 4
Manually entered data 2
Manually entered data 4
The problem is when a new record is added to the database. It creates a new row for columns A to F however the data for H to L does not move. The same occurs when a record is deleted from the database.
A
B
C
H
I
1
Record 0
Some data 0
Some data 0
Manually entered data 1
Manually entered data 3
2
Record 1
Some data 1
Some data 1
Manually entered data 2
Manually entered data 4
3
Record 2
Some data 1
Some data 1
I'm trying to convert this code so it transfers the data without the input box being needed.
Dim response As Long
Dim strLastRow As String
Dim rngC As Range
Dim strToFind As Variant, FirstAddress As String
Dim wSht As Worksheet
Dim rngtest As String
Application.ScreenUpdating = False
Set wSht = Worksheets("Transfer Sheet")
strToFind = Application.InputBox("Enter Your Initials")
If strToFind = False Or strToFind = "" Then Exit Sub
With ActiveSheet.Range("H2:H5000")
Set rngC = .Find(what:=strToFind, LookAt:=xlWhole)
If Not rngC Is Nothing Then
FirstAddress = rngC.Address
Do
strLastRow = Worksheets("Transfer Sheet").Range("A" & Rows.Count).End(xlUp).Row + 1
rngC.EntireRow.Copy wSht.Cells(strLastRow, 1)
Set rngC = .FindNext(rngC)
Loop While Not rngC Is Nothing And rngC.Address <> FirstAddress
End If
End With
I have to workbooks and I want to populate one of them with data from the other. The receiving document has the fields Account and SubAccount which I need to match up with the account and subaccounts in the other workbook.
However, in the other workbook, the line looks like "1000 Wages 000001" (which is account, name, subaccount). I can't find out how to have my receiving document scanning the providing document and when it finds an account and subaccount (in the above string) that matches the account and subaccount in the receiving document, to bring over the data.
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
View 7 Replies View RelatedThere’s one “master table”. Two columns in master table are titled “Name-1” and “Name-2”, and all columns in front of it carry “Properties” corresponding to these names.
In a “second” table, when we choose/type the Name-1 and Name-2, corresponding properties should automatically be picked up from the master table. Is that possible?
I have a sheet with 1250 data. All are in Column "A" I want to print them out and therefore would like the data also in Column "B" and "D" in order to save printing paper and make it easier to search. Since the data is alphabetical sorted, doing it manually is a big job.
View 6 Replies View RelatedI have a new spreadsheet that I made to give us the break down of each invoice we create. what we want is to see each job that is done (by code), the amount we charge per each, the cost of goods per each, and the profit margin. In this spreadsheet I have two tabs. in tab one it has the form I made that has a place to input the data that will change with each invoice as well as a section that is broken down into columns. In these columns I have it listed this way. CA=Job code, CB=Job Description, CC=how many, CD=Charge ea., CE=rate total, CF=COGS ea., CG= COGS total, CH=profit
I have the formula done for all of the math the get the totals. My idea was to make a second tab. In tab 2 I have everything listed in columns that will go into tab one. It is broken down like this. CA=Job Code list, CB=Job Description list, CC= charge ea. CD= COGS ea.
What I want to be able to do is when I type in the job code in the first cell under the column A on tab one, it will bring over all of the info from tab 2 and put it in the right spot for that code. So if I typed in say TT001 in that cell it would bring over the description matching that code and put it in the cell under B, along with the charge in column D, and the COGS under column F. And I want it to be that way for each code I type in and it will be different each time I fill this out. How do I explain this part? Ok so I a new invoice made its # 22. I take this spread sheet and do what I want and get all the totals so I print it out. I then want to be able to clear all the info and or just type in a new set of codes that will be on invoice # 23 and then #24 etc.
So what I am saying is the codes will be different each time I fill it out. that's why I have them listed on a different tab and will just put them in tab one long enough to get the total and print it out. Is that clear as mud? I will stop here and wait and see what questions I get back.
I have a program I built and need to transfer data from a form, from workbook "C" to another workbook "W". The workbooks are open by different users . 90% of what I locate on the Web pertains to worksheets and what don't, does not work. The folders are stored in my Public Documents.
View 4 Replies View RelatedHow to transfer data from one workbook that's open to another in a macro form. I included two sample data workbooks I have. Sample will have the macro inside it and will already be open for the other portion of the macro that will be running. I already have code that will open up the Sample2 file. I'm trying to take specific data from Sample and paste it into a summary sheet in Sample2. In Sample i will be cycling through roughly 30 sheets to find this data but I only included one because I just need to know the basics on how to make this work and then how to modify it.
Sample2.xlsx Sample.xlsx
i need the data from columns D & E on the JOKE sheet to be transferred to columns F & G on the sheet called MY PRODUCTS...
you will see that the products may have slightly different names but the product codes (column C on the joke file and column E on the my products file) are always the same.
i want to just click a button and add the data from sheet 2 tab to the columns on sheet 1 tab.
my products.csv
joke.csv
I'm trying to get my code to search through some information and transfer the data from one sheet to another. Trying to find out why my code isn't working. I keep getting errors...
Here is the code I am having trouble with...
I need to transfer a large amount data (~2,5 million lines of data) from one spreadsheet to another while making sure the destination file is kept in a certain format.
Spreadsheet "oxno" is the file that needs filling out with data provided to me in spreadsheet "ox"
The value that is the matching criteria will be the ITS account number (Field B in "ox" and field A in "oxno") and the currency (Field B in "oxno" and field G in "ox")
So I want a macro to look in "oxno" and use field the values of field "a" & "b" and search for the them in "ox" in fields "B" & "G". Once it finds a match it should copy the value of field "I" in "ox" and paste into field "n" on "oxno".
The next data to be copied should be what goes into field "O" in "oxno" this data is derived from field "L" or "M" but only when its of numerical value with one non numerical field in it (usually a "/"). Last value that I need copied over is Field "T" on "oxno" this is derived from field "J" or "M".
I realise the potential conflict because two sets of queries will be looking to gather values from field "M" on "ox". That is why I am hoping when we look for value for field "O" in "oxno" we only look for numbers with one non numerical field in it (usually a "/") .
After finishing writing this up, I realise how wordy this has become appologies for that, but hopefully someone will be able to understand what I am looking to achieve and will be able to suggest a solution.
on the "all data" sheet, there are two rows that have a Y for file missing - these are to be marked, so that they may be focused on finding their file
currently, i am doing as such and then filtering by that column to print out a list, and would like a simplified solution (populate sheet "missing") with just those rows who have missing files - so that another user may easily view such data without having to fondle around with the master list
I have two worksheets one that has a weekly schedule and sheet2 (daily attendance) where i want to transfer One day at a time but i only need the Job role,employee name and shift for that day, then i need to do the same for each day but i don't want seven sheets. please find attached an example sheet.
View 2 Replies View Relatedi have the following macro which transfers credit control data from an outstanding tab to a paid tab:
View 9 Replies View RelatedI am trying to transpher data between two userform.
The Idear, To store information within a list box on a userform and select what list items "information" is to be copyied to another useform's Textbox.
To have the 1st userform with a Text Box and one Button. When the user click the button the userform containing the listbox " information" is displayed. On this form the user can select an item "Information" that they want to be transphered into the other useform's textbox. (any information that is going into the textbox must only be added to the textbox information as a new line)
i need your help by a code to transfer the data mentioned in ( main ) sheet ( in attached file ) to the ( 8 agents ) sheets which addressed (A,B,C,D,E,F,G,H) ( in same cells for easy using the code ).
I have a spreadsheet called DATA1 that has code in 3 cells B2, D2, F2.
I want a peace of code that will allow me to transfer this data when I click a macro button (Lets call the button "transfer") to another spreadsheet call SALES1.
to do this it has to open the cell and place the data in the same cells on sheet1 of sales
I have 3 worksheets- Sheet 1 and Sheet 2 will have data from the customer that I need to transfer in Sheet 3 as a summary. So if 5 rows are filled in Sheet 1 and 6 rows in sheet 2, VBA code that can transfer data from sheet 1 and sheet 2 to sheet 3 all one after other (i.e. have 11 rows total). The current code formula i have just replaces data that was filled in from sheet 1 to sheet 2.
View 7 Replies View RelatedI am trying to transfer data from two different spreadsheets where their data has common column titles and then transfer it to a Master spreadsheet. These two spreadsheets will have different filenames most of the time. If the first spreadsheet has a new data, then it needs to be transferred to master spreadsheet and when the other shpreadsheet has a new data, it will be added to the mast template as well. The problem is those two spreadsheets always change their filenames. How can I have a macro that will rely on the columns instead where data resides and transfer it to master template?
What I am trying to achieve is like two buckets with water (two spreadsheets wth some common columns) and their water will be transferred to a big water drum (master spreadsheet). For now, what I'm doing is always copy and paste data to the master spreadsheet and it takes me forever to do it one by one.
I don't know if I can attach my spreadsheets here so I only put the link for pictures [URL] ........
This is what I have:
Sub UpdateFromTable1And2()
Dim sFileName(1 To 2) As String ' List of file names
Dim nFile As Long ' Index for file name list
Dim wb As Workbook ' Opened workbook
Dim ws As Worksheet ' Worksheets("Combined") in this workbook
[Code] ..........
How can I move every row data to another sheet, when the print(moving) button will shown i every row. Problem is that i need write a code and insert button for every row, how to automate this proces. So the main key is that, i can chouse wich row i want to transfer to another sheet.
View 1 Replies View Related