I have two columns. When I enter any value in column 1, I want the other column to give today's date automatically. I want that date not to change tomorrow and remain as it is. I have to make such entries everyday.
View 9 RepliesI have a little problem (but for me is like a break); I want, when I change some in a cell, in the other cell, show me current date. I try with "today()", but , next day when I open that workbook, in that cell, show me the date coresponding with the next day (normaly).
How ,I can rezolve this? I want to blocked that cell, only view, but no acces for change enithing.
I have been struggling to get dates to remain in a consistent format within my Excel 2003 worksheets. I would like to work out how to keep them permanently in the "dd/mm/yyy" format. I have tried several formatting options. The current method I will explain below:
I have several forms into which the 'date' is automatically entered using the - Format(Date, "dd/mm/yyyy") code. This is then saved into cells on a worksheet using the code
ws.Cells(iRow, 1).NumberFormat = "dd/mm/yyyy"
ws.Cells(iRow, 1).Value = CDate(Me.Date1.Caption)
At this point if I do a search for a date, lets say 23/03/2012 I can retrieve it and everything related to it - all seems fine (also all dates are visually in the correct format in my cells etc).
The problem arises when I exit Excel and save the workbook. When I go back into the workbook at a later time and try and search for the same date it won't work. Although the dates in the cells still read for example 23/03/2012, the search requires me to now use the format 03/23/2012 to retrieve the information (It seems like in the background the date has reverted to the US date format upon saving and yet visually it is still how I've set it up).
I need to add to a current macro which currently copies the master tab and creates a new tab with tomorrow's date on it. For reference here is the current macro:
View 3 Replies View RelatedIf a1,a21,a41 have a value greater than 0, I wish to stamp cell b1,b21,b41 and so on with todays date, but without the stamped value changing/advancing tomorrow. At the moment cells b1,b21,b41 are copied down as follows. =if(a1>0,TODAY(),"") This works fine, but the date stamp of course changes tomorrow. I can not apply code to the whole b column as cells b2:b20, b22:40 etc have other non-date format data to which the code does not need to apply - the todays date value cell occurs every 20 cells.
View 6 Replies View RelatedI have a number of sub routines that manipulate data in various ways to which I have assigned various shortcut keys (Ctrl + whatever) However as there are quite a few of these I wondered if it was possible to create some sort of pop up box in which I could list the shortcuts, the box being able to be opened and closed at the users request.
I can of course do this with some sort of userform but when this is open I can't then work on the sheet. Also as this would presumably be opened from within some code, waiting for the user to click the close button then wouldn't this prevent the other sub's from executing.
I wanted to know how do I keep a toggle button in the on(ture) position after I close the userform? How do I keep the toggle button off(false) positoin after I close the userform? In order words, once I run my macro again, I want it to remain in memory that my toggle button was in the on(true) or off(false)?
For example,I have an application that I am developing which involves some what-if analysis for some projects. There is a command button located on my worksheet. After the command button is clicked, I have include some toggle buttons on a userform for all of the various projects. If I assume that sine projects will not be used, I click the associated toggle buttons. This puts them in the on(true) position. After I close the userform and reclick the command button, my toggle buttons are all back in the off(false) position.
Attached is a screen shot of a bit of a file I made to use daily. It needs to be used by many people and always starts out new each day. I'd like to make the comments on the right stay "full size" when the sheet is scrolled down (it needs to be able to scroll). The top 3 lines are "fixed" and don't scroll. I've tried comments ( currently ), pictures, imported pictures...everything I know to try. How can I make the comments box persist without "rolling up" when the remainder of the sheet is scrolled?
View 2 Replies View Relatedi am wondering if there is a way that i can have these cells that depend on formulas to remain blank, until i have my data entered, or that they may remain blank, but give me running totals of only the cells i have inputted.
View 3 Replies View RelatedHow can I make a cell display 0 or remain blank instead of #N/A?
I have several cells that are either VLOOKUP or just normal sum functions but they all display #N/A.
Amount Amount Item Total Account
$ -
No Profit$ 629.50 $ - $ 629.50 No Profit$ 46.29 $ - $ 46.29 No Profit$ 2,333.01 $ 233.30 $ 2,566.31 233.3
$ -
No Profit
$ -
No Profit
$ -
No Profit
$ -
No Profit
#1 If there is an amount in column B, I want column D to reflect that amount.
#2 If there is no amount in column B, I want column D to state the words "No Profit."
#3 Already in column B is the formula =C1-A1.
I tried =IF(B1=0,"No Profit",B1) but when I copy that formula down the spreadsheet, it inserts "No Profit" into all of column D. I only want "No Profit" to exist when there is a $0 resulting from the formula mentioned in point #3. When there is a blank cell in column D, I want it to remain blank until an amount is entered in that row?
I know how to reference cells from one sheet to another but for some reason I cannot for the life of me work out how to do this and that particular figure remains even after sorting sheets? Basically every time I reference some numbers its fine but when I sort the original sheet being referenced the figures are all wrong. I tried linking the cells and that didn't do it either?
View 5 Replies View RelatedI have used the following long but simple formula.
=SUM((B17*B14)+(C17*C14)+(D17*D14)+(E17*E14)+(F17*F14)+(G17*G14)+(H17*H14)+(I17*I14)+(J17*J14)+(K17* K14)+(L17*L14)+(M17*M14)+(N17*N14)+(O17*O14))
I need to copy it to numerous other cells. However I need the row fourteen values to remain the same while the other values change according to which row I'm copying it to e.g
=SUM((B20*B14)+(C20*C14)+(D20*D14)+(E20*E14)+(F20*F14)+(G20*G14)+(H20*H14)+(I20*I14)+(J20*J14)+(K20* K14)+(L20*L14)+(M20*M14)+(N20*N14)+(O20*O14))
Is there any way of doing this without changing the formula manually every time?
s1. Offset(1, 2).Range("K4:K464").Formula = "=IF(ISNA(VLOOKUP(C2,Sheet2!$A$2:$B$1063,2,FALSE)),"""",(VLOOKUP(C2,Sheet2!$A$2:$B$1063,2,FALSE)))"
How do you get code like above to work in Offset? When i run it the cells remain blank but the code is above in the fx.
On Sheet 1 I have Data Validation Lists set up. On Sheet 2 I have the information populating from what is entered on Sheet 1, only problem is...when I don't have anything entered in the cell(s) on Sheet 1 then the cell(s) on Sheet 2 reflect 0. I would like the cell(s) to remain blank if nothing is entered on Sheet 1.
View 4 Replies View RelatedI have created a spreadsheet which is tallying up various data. I have a number of different categories e.g. A, B, C, D and within each one of these are sub categories. I then have a tally for the number of each category and within that the number of each sub category. I then want to sort the data so that first the main category is sorted in order of highest tally to lowest. the sub categories however need to stay with their primary category. I then need to sort each sub category within the main category.
the data looks omething like this:
category tally sub cat number
A 6 A 3
B 4
C 6
B 9 A 1
B 6
I want a specific workbook to be always on manual but when I open other workbooks I want them to remain on automatic even though the first workbook is set on manual through vba code. Is that possible to be done?
This is the code I run:
Private Sub Workbook_Activate()
With Application
.Calculation = xlManual
.MaxChange = 0.001
.CalculateBeforeSave = False
[Code] .....
I know that Application. Calculation refers to all open workbooks but I don't know the code to specify the manual calculation to this workbook only while others are open.
I have created a custom floating toolbar that works perfect (thanks to all the reading on here!). My workbook is a stand alone estimating tool that many users will have a copy of.
I have two things I want to do yet but I cant find it on here.
1) My buttons on my toolbar - I want to have custom icons. I can do this temporarily but when I exit my worksheet and re-open they are lost. Is there anyway to save a custom icon. I am willing to add it to the icon list if necessary and then when users open the workbook copy the custom icons onto their computer. But I am not sure how/where I could do this.
Worse case, can I color my button text?
2) When my toolbar appears, it is wide, all buttons are going left to right. I want the size to be small width so the toolbar buttons are on top of each other. Any thoughts? I tried adding a .width but it didnt work.
I have 32 schools monthly report and I have to change Dates on each page at the end of every month. change the dates at once on each sheet..I have highlighted the dates that need to be changed.. though I have the sheets in word rather than in excel..
View 7 Replies View RelatedI am working in a large database and trying to change the date field. I want to change all the dates to the first of the month.(ie 10/19/2008 to 10/01/2008) Is there a way I can change this in excel without having to go in and manually change all the days to the first.
View 5 Replies View RelatedI have a spreadsheet here and in column A I have a list of names with the look I want however if you look at the name in the window it just shows the date.I want the format of this column to use text is there an easier way to change all those dates other than typing them all in again?
View 4 Replies View RelatedSo I have a graph with years present on the x-axis. I'm trying to format the axis from the years 1913-2012 (right now it's like 1900-2020). In the minimum and maximum range in the 'format axis' box these dates are listed as values instead of years (0-45,000). Is there a way to make these boxes just represent the years so i don't have to convert 1913 to the excel number equivalent?
View 1 Replies View RelatedI imported a large amount of data from another program. The data is in one column and is in date format (02/24/57), for example. The data is made up of my clients birthdays. I want to import those birthdays into my outlook to create reminders but the dates are years past. I need to change the birth year to the current year in order for the reminder to activate going forward. If I dont update the year, the dates import back to the date they were born. In some cases 60 years back.
I am hoping that I dont have to manually change each date before I attempt to import into outlook.
How to change the date automatically depending on the instructions. If the date of the medical certificate of the Government (MCG) included, automatically private medical certificate (MCP) date will change to the rear on the day before the Government's medical certificate given if the date overlaps
View 3 Replies View RelatedHave a simple Pivot table that i have grouped in 14 day buckets.
Currently, the date range looks like this:
1/21/2013 - 2/3/2013
However, I want the range to show the 'last' date only.
Is there a simple way to do this? I just can not see it in the format cells menu...
Gary Pivot.jpg
I'm attempting to get a column of due dates to update automatically every time a date changes. The due dates are in B3:B15. There is a header in B3. The day after the actual due date, it is automatically changed to the same day on the next month (showing the next due date). I need the spread sheet to automatically sort the due dates from the closest due at the top, to the furthest due date from today at the bottom. Running it manually, or sorting it manually every time won't work. This is for an elderly couple who are having problems keeping track of everything each month. I just need something that will show them the upcoming bills and how soon they are due when they open the workbook. Anything other than opening the workbook is going to be too complicated. I'm new to macros. I've tried to modify some I've found in other threads, but no luck (lots of error messages). I don't understand it enough yet to figure out what I need to change. I've attached a sample sheet that shows the part of the workbook I'm having trouble with.
View 4 Replies View RelatedIm trying to write a macro which goes down column C and if the date is less than todays day change it to today. I cant get the code correct thou.
Code:
Sub aaaChangeToTodaysDate()
Dim LastRow As Long
Dim r As Long
[Code].....
I have dates (column E) and times (column F) currently in the format mm/dd/yyyy and hh:mm .
However, my formula in excel deals with dates and times in the format mmddyyyy and hhmm. How do I change the values of the dates to exclude the "/" and the times to exclude the ":" operators?
I want to change the actual value of the cell too. Basically, using custom format mmddyyyy in the date column will not work (because the true value of the date will still yield mm/dd/yyyy.
In my workbook I have several column with dates, these are benchmarks that I need to follow and have my patient's follow. They concern the dates of treatments and of lab work. My last column is Contact Needed and does not contain any formulas or code. Is there a way to change the color of the row to adjust for how close we are to the treatment date or the lab draw date.
I was thinking if I were +/- 7 days from each blood draw the row would be yellow, so I could contact the patient and remind them to get the labs done. If it was over 7 days past scheduled blood draw, the row would be light red, as the urgency to get labs and continue treatment has increased as they are past due. In like manner, if treatment are within 14 days, the row would be yellow so i could call them and set the appointment. If past the treatment date, the row goes red and I have 14 days to get them in or we have to start treatment s all over again.
Book0.5 template.xlsx
I’m sure conditional formatting is the way forward with this but can’t quite get the formula right. I need 2 columns: Column A will have dates that an event happened on. Column B will be blank until we have received back in a letter that went out on the date in column A. At which point the date the letter was received back in will be entered into column B
What I need is for the Colour of Column B to change from green (before and on the date of Column A) to Amber (for the next 3 days) and then red (from Day 5 onwards. This would be until a date was entered in column B (the date the letter is received back in) at which point it would just go back to white. This would keep a check on how long the letter was out for and whether we need to chase it up or not and with an increasing urgency.