i am wondering if there is a way that i can have these cells that depend on formulas to remain blank, until i have my data entered, or that they may remain blank, but give me running totals of only the cells i have inputted.
On Sheet 1 I have Data Validation Lists set up. On Sheet 2 I have the information populating from what is entered on Sheet 1, only problem is...when I don't have anything entered in the cell(s) on Sheet 1 then the cell(s) on Sheet 2 reflect 0. I would like the cell(s) to remain blank if nothing is entered on Sheet 1.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
Amount Amount Item Total Account $ - No Profit$ 629.50 $ - $ 629.50 No Profit$ 46.29 $ - $ 46.29 No Profit$ 2,333.01 $ 233.30 $ 2,566.31 233.3 $ - No Profit $ - No Profit $ - No Profit $ - No Profit #1 If there is an amount in column B, I want column D to reflect that amount.
#2 If there is no amount in column B, I want column D to state the words "No Profit."
#3 Already in column B is the formula =C1-A1.
I tried =IF(B1=0,"No Profit",B1) but when I copy that formula down the spreadsheet, it inserts "No Profit" into all of column D. I only want "No Profit" to exist when there is a $0 resulting from the formula mentioned in point #3. When there is a blank cell in column D, I want it to remain blank until an amount is entered in that row?
Read about the Dfunctions and SUMIFS/COUNTIFS not working between linked objects and think my error is the same.
SYMPTOMS: Formulas wont work unless linked workbooks are open. Once open they work and as soon as the sheet is altered after they are closed, they links break.
My formula =OFFSET(('Linked Workbook'!$A$1),0,VLOOKUP(Range,RangeData,2,0)-1) or go to workbook and bring back a certain amount of cells to the right of A$1$ based on a lookup formula in the Main open workbook.
What can I add to the macro I already have in place (below) to accomplish what I'm looking for (2 parts)? ...
1) I need to copy everything (formulas) that is in C7:F7 and paste it down to all "active" rows - I'm defining an active row by any row where column A is not blank.
2) I need to copy everything (formulas) that is in Q7:AF7 and paste it down to all "active" rows - I'm defining an active row by any row where column P is not blank. (You'll notice by the screenshot that there will be blank cells in column P mixed in with non-blank cells.)
I can't figure out how to make this formula work because I need to use cell AG46 and it contains an IF formula that leaves the cell blank if the sum = 0. I keep getting the #VALUE! error. How do you create a formula using a cell that has an IF formula that could leave the cell blank?
Basically this is what I need in cell I12: =sum(a12)-(ag46*8)
I have the column E in excel labeled 'Notes' in tab 1 adding at the bottom of the column using(=COUNTA(E2:E29), so if the cell is empty it doesnt add it up in the totals. In tab two i have that same column linked via formula. In tab 2 its counting the empty cells because even though they appear blank they have a formulas in them how do i get it to not count those cells. here is the formula im using in column E tab 2.
I have several lists that I need to be able to print out periodically.
The main worksheet that underpins each list is over 900 lines long and numerous calcs and formulae populate columns to provide the data for my 'print lists'.
I need my 'print lists' on seperate worksheets and I have linked the data from my main worksheet results, using IF statements to stop unwanted results being displayed by making the rows appear empty (i.e. to display "").
Due to the design of my main Worksheet it is inevitable that I have many rows in each 'print list' that are not required for that particular 'print list'.
I want to remove the 'empty' rows from the print sheets at the time of printing. I cannot use the GoTo > Special > Blanks > Delete Rows because the rows are not recognised as being 'blank'.
I have attached 2 screenshots of my 'print lists'.
P.S. I am not assuming anything but I have searched on OZGRID and it appears to me that I might need to use Excel/VBA?
Attached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I know how to reference cells from one sheet to another but for some reason I cannot for the life of me work out how to do this and that particular figure remains even after sorting sheets? Basically every time I reference some numbers its fine but when I sort the original sheet being referenced the figures are all wrong. I tried linking the cells and that didn't do it either?
Someone here wrote up this code for me which converts cells with formulas to a new formula (It adds a division to the formula in the cell). It works great with one problem. If the code is rerun multiple times it doesn't check if there is a division added already and just keeps adding and adding to existing formula. For the last our I tried to add a check to the code. Something along the lines "If cell already has "/H2" inserted" skip to next cell. But nothing is working.
Here is the code I'm working with:
Dim MyRange As Range, NewFormaula As String, Delim As String Dim Cell As Range Dim MyString As String Dim Format As Range Dim ws As Worksheet
I am trying to have the formula =( SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Put into cells through vba. What I did to get the formula is typed it into an excel cell to find the average of a group of cells that do contain blank cells. The formula brought out the proper results. So all I did is put the formula into vba and changed the appropriate parts. The range will not be the same of course, but there is what I have.
When I show a msgbox for ActiveCell.Formula (Msgbox activecell.formula), it shows me the formula as above - =(SUMIF(S2:S125,">0",S2:S125))/(COUNTIF(S2:S125,">0")) Except instead of the s:ranges, it shows $L2:$L125 (which is correct). The quotes do show up around the criteria in both the sumif and countif. I keep receiving an error. I put a msgbox err.description & ", " err.number dialog in. The error comes up as ", 0" (no quotes).
On Sheet 2 I am looking for a formula to find Dog1 in a cell on a different sheet and then to equal a cell 2 columns to the right of where ever it found Dog1. I cannot make it so that it simply equals a certain cell all of the time. It has to be able to move in sheet 1. For example sometimes Dog1 will be on row 5 and sometimes it will be on row 7. So the equation I am looking for needs to be able to work no matter what row it is on. I have tried a couple VLOOKUP equations but they are not working because like I said, Dog1 is not the only text in that cell.
I want to extend a formula like so- =Sheet2!M3 =Sheet2!M60 =Sheet2!M117
Basically I want it to go up in increments of 57 when I copy the formula down. Is there an easier way to do this rather than typing it over and over again? I looked on an older post and saw some information about OFFSET and INDEX but couldn't figure out exactly how that worked.
I am trying to achieve the below objective but getting error message
Objective: select last non blank row and offset to next cell type a message in it error message: Runtime error 1004 : method 'Range' of Object '_Global' Failed
Sub lastRowAll() myvar = ActiveSheet.UsedRange.SpecialCells(11).Column myrow = ActiveSheet.UsedRange.SpecialCells(11).Row Range(myvar, myrow).Offset(0, 1).Value = "Experiments with VBA" Range(myvar, myrow).Offset(0, 1).Activate End Sub
I have a worksheet where I want to have one column of state abbreviations (entered by the user), and a second column of state-specific information that will be entered from a lookup table--named "StatePrefixes". Here is my code so far:
VB: Public Sub cmdSelectState_Click() Dim St As String St = ActiveCell.Value ActiveCell.Offset(0, 1).Value = Application.WorksheetFunction.VLookup(St, StatesPrefixes, 2, False) End Sub
As is the code is generating a run-time error "Unable to get the Vlookup property of the WorksheetFunction class. If I remove the reference to the WorksheetFunction class I then receive a value of "#N/A" in my worksheet.
I am running Excel 2007 on Windows Vista Business 32 bit. Recently I have noticed that if I enter a formula into an empty, unsused cell, it is recognized as a formula. If I modify that formula, it is then recognized as text and does not work as a formula. The only way I can get the cell to recognize a formula is to delete the cell and start over. This same scenario does not occur on previously stored workbooks. I have checked all of the flags that I know about, including the Options function.
I want to copy an active cell in row 2 (I dont want to fix a cell as it can be any cell at any time). I want to copy it all the way down to a cell where the next row after it, is completely blank on all the 256 cells.
My workbook stores data related to items that are all tracked by barcodes. Im using the following code (as part of a larger set of code) to copy data from rows 6 on in column D, E & G to K from one workbook to another. The data in F (Item Names) is found using a formula, by matching the barcode data in the corresponding G cell (on the same row) to another sheet (where the barcodes and Item names are stored). When the data has finished copying over and EnableEvents gets turned back on the F column mostly automatically fills itself in from the formula.
The issue I have however is in certain circumstances there are some items that either dont have a barcode, or the barcode is missing. In this case the user types "none" (not case sensitive), which opens a userform allowing the user to type in an Item name that gets entered into the F cell, overwriting the formula. I need to copy this data over separately to the new workbook. Im looking for code to find these records from row 6 on (either by searching for rows where G equals "none", or rows where F has no formula, and then copy the data in F over to the other workbook to the corresponding row number but offset by the number of records already present in the active workbook (currently being calculated by wbReturnDataLastRow).
wb is the ActiveWorkbook that the data is being copied to mybook is the workbook that the data is being copied from
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
I have a number of sub routines that manipulate data in various ways to which I have assigned various shortcut keys (Ctrl + whatever) However as there are quite a few of these I wondered if it was possible to create some sort of pop up box in which I could list the shortcuts, the box being able to be opened and closed at the users request.
I can of course do this with some sort of userform but when this is open I can't then work on the sheet. Also as this would presumably be opened from within some code, waiting for the user to click the close button then wouldn't this prevent the other sub's from executing.