I have 32 schools monthly report and I have to change Dates on each page at the end of every month. change the dates at once on each sheet..I have highlighted the dates that need to be changed.. though I have the sheets in word rather than in excel..
View 7 RepliesI want to create a hyperlink to a sheet named "adsf"
I am currently in a worksheet named: "62b Arcus"
I want the hyperlink to be set by grabbing the name from another cell.
For example, In cell h7, I have the text: adsf
In cell g7, I want to place a formula such as: =HYPERLINK("adsf!")
Except, instead of this, I want: =HYPERLINK("h7!")
In this way, i want it to hyperlink to a sheet name based on the text that is in h7.
But neither of these formulas work. Both say the following: "Cannot Open the Specified File"
After reading up on this I have discovered that I must save the file and include the file name inside the formula.
My file name is: [Maintenance Color Codes of Houses - colour coded2.xlsm] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
This hyperlink actually works. Yet I have a problem. What if I rename the file. For this reason, I want it to grab the current file name using "filename". I have tried this by the following:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
This grabs the current file name "Excluding the text outside of the [ and ]. I was able to create this formula myself.
How come I can't replace the part with [ and ] =HYPERLINK("[Maintenance Color Codes of Houses - colour coded2.xlsm]adsf!A1","LINK")
with:
=MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))
These two formulas together would be:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))adsf!A1","LINK")
I also want to replace the "adsf" part with a cell number such as h7. So that it says h7!A1","LINK") or in full:
=HYPERLINK("MID(CELL("filename"),SEARCH("[",CELL("filename")),SUM(SEARCH("]",CELL("filename")),-SEARCH("[",CELL("filename")),1))h7!A1","LINK")
This doesn't work either
I know that I have probably created a ridiculous formula for what I am after. I'm almost there but not quite. You may know something far, far more simple.
Create a macro which will combine three different sheets with their names from 10 to 15 sheets.
View 1 Replies View RelatedI am working in a large database and trying to change the date field. I want to change all the dates to the first of the month.(ie 10/19/2008 to 10/01/2008) Is there a way I can change this in excel without having to go in and manually change all the days to the first.
View 5 Replies View RelatedI have a spreadsheet here and in column A I have a list of names with the look I want however if you look at the name in the window it just shows the date.I want the format of this column to use text is there an easier way to change all those dates other than typing them all in again?
View 4 Replies View RelatedSo I have a graph with years present on the x-axis. I'm trying to format the axis from the years 1913-2012 (right now it's like 1900-2020). In the minimum and maximum range in the 'format axis' box these dates are listed as values instead of years (0-45,000). Is there a way to make these boxes just represent the years so i don't have to convert 1913 to the excel number equivalent?
View 1 Replies View RelatedI have a workbook with probably 60 tabs/sheets at the bottom, each titled with a date, like 10-2-2008. In each tab/sheet, I have information for that day. What I am trying to do is on a new sheet, have all those sheets listed down column A. Next, in column B, I would like the value of cell D1 from each tab/sheet.
Is there a formula I can write that will lookup the value of D1, for each date listed in column A? I have tried doing =INDIRECT(A1&"!D1"), where A1 is a date/tab name, but it will not work. If however I rename the sheet "5", then have a "5" in cell A1, it will give me the data listed, but for some reason if I have a date with dash's, 10-2-2008 it will not work.
I have 3 sheets in my workbook. (List, Half 1, Half 2)
I am using the following code to search from a list of dates which is in the list sheet, and then find them on the other two sheets.
My code works fine until the 7th date, and then I get a runtime error 91.
Sub Find_Date()
Dim Variable, Variable2
Sheet1.Activate
Range("Y14").Select
Start:
Sheet1.Activate
ActiveCell.Offset(1, 0).Select
Do While ActiveCell.Value <> ""
Sheet1.Activate
Variable = ActiveCell.Value
Sheet5.Activate.....................
I imported a large amount of data from another program. The data is in one column and is in date format (02/24/57), for example. The data is made up of my clients birthdays. I want to import those birthdays into my outlook to create reminders but the dates are years past. I need to change the birth year to the current year in order for the reminder to activate going forward. If I dont update the year, the dates import back to the date they were born. In some cases 60 years back.
I am hoping that I dont have to manually change each date before I attempt to import into outlook.
How to change the date automatically depending on the instructions. If the date of the medical certificate of the Government (MCG) included, automatically private medical certificate (MCP) date will change to the rear on the day before the Government's medical certificate given if the date overlaps
View 3 Replies View RelatedHave a simple Pivot table that i have grouped in 14 day buckets.
Currently, the date range looks like this:
1/21/2013 - 2/3/2013
However, I want the range to show the 'last' date only.
Is there a simple way to do this? I just can not see it in the format cells menu...
Gary Pivot.jpg
I'm attempting to get a column of due dates to update automatically every time a date changes. The due dates are in B3:B15. There is a header in B3. The day after the actual due date, it is automatically changed to the same day on the next month (showing the next due date). I need the spread sheet to automatically sort the due dates from the closest due at the top, to the furthest due date from today at the bottom. Running it manually, or sorting it manually every time won't work. This is for an elderly couple who are having problems keeping track of everything each month. I just need something that will show them the upcoming bills and how soon they are due when they open the workbook. Anything other than opening the workbook is going to be too complicated. I'm new to macros. I've tried to modify some I've found in other threads, but no luck (lots of error messages). I don't understand it enough yet to figure out what I need to change. I've attached a sample sheet that shows the part of the workbook I'm having trouble with.
View 4 Replies View RelatedIm trying to write a macro which goes down column C and if the date is less than todays day change it to today. I cant get the code correct thou.
Code:
Sub aaaChangeToTodaysDate()
Dim LastRow As Long
Dim r As Long
[Code].....
I have dates (column E) and times (column F) currently in the format mm/dd/yyyy and hh:mm .
However, my formula in excel deals with dates and times in the format mmddyyyy and hhmm. How do I change the values of the dates to exclude the "/" and the times to exclude the ":" operators?
I want to change the actual value of the cell too. Basically, using custom format mmddyyyy in the date column will not work (because the true value of the date will still yield mm/dd/yyyy.
I have two columns. When I enter any value in column 1, I want the other column to give today's date automatically. I want that date not to change tomorrow and remain as it is. I have to make such entries everyday.
View 9 Replies View RelatedIn my workbook I have several column with dates, these are benchmarks that I need to follow and have my patient's follow. They concern the dates of treatments and of lab work. My last column is Contact Needed and does not contain any formulas or code. Is there a way to change the color of the row to adjust for how close we are to the treatment date or the lab draw date.
I was thinking if I were +/- 7 days from each blood draw the row would be yellow, so I could contact the patient and remind them to get the labs done. If it was over 7 days past scheduled blood draw, the row would be light red, as the urgency to get labs and continue treatment has increased as they are past due. In like manner, if treatment are within 14 days, the row would be yellow so i could call them and set the appointment. If past the treatment date, the row goes red and I have 14 days to get them in or we have to start treatment s all over again.
Book0.5 template.xlsx
I’m sure conditional formatting is the way forward with this but can’t quite get the formula right. I need 2 columns: Column A will have dates that an event happened on. Column B will be blank until we have received back in a letter that went out on the date in column A. At which point the date the letter was received back in will be entered into column B
What I need is for the Colour of Column B to change from green (before and on the date of Column A) to Amber (for the next 3 days) and then red (from Day 5 onwards. This would be until a date was entered in column B (the date the letter is received back in) at which point it would just go back to white. This would keep a check on how long the letter was out for and whether we need to chase it up or not and with an increasing urgency.
I work in a Wordprocessing Center. I have a spreadsheet that is a list of dates, and the jobs/projects that were done on that day. The dates are for the days Thursday, Friday and Saturday.
So, for example: in cell E2:E150 are the dates ranging from 11/2/2007 through 11/4/2007.
Off to the side, in cell L:15 through L:17, I've manually typed in the dates 11/2/2007 to 11/4/2007.
My problem is: I need to be able to count how many times 11/2/2007 shows up in the range of E2:E150. The thing is, I don't want to have to type 11/2/2007 or 11/3/2007 or 11/4/2207 in the formula. I want it to get the specific date from L:15 (what I've typed in).
My goal is that the range of dates will always change in cells E2:E150. Then I will manually type in the three dates of question into cells L15:L17. Then Excel will count the occurences for me.
In tab 1, I am trying get column S to change to what any time date in column F, G, H, J, L, N, Q or R get changed to-
View 9 Replies View RelatedI have a series of dates that I need filled down the spreadsheet, however the dates change at different intervals.
The best way I can describe it would be;
IF: Cell contains text
THEN: Copy Text
ELSE: Paste Text
Rinse and repeat!
My spreadsheet looks something like: ..
I have column "C", starting from "C5" with dates till C200, but not all cells have dates some of them are also blank.
I want the cell to change color depending on the date.
If the written due date is in a month from today, I want it to turn yellow, and if the due date is in the past from today, I wanted to turn red. I want it to get updated every month.
I'm looking for a formula that will change the colour of another cell dependent on dates.
Say I have a date (or any data) in cell A1 I want cell A2 to be highlighted yellow, after 10 days I want this cell to change to red as it is overdue.
Finally when a date is entered into the yellow/red cell I want the colour to remove.
I am unable to change the date format in a column of dates. The cells have values that look like the following: 4/29/2013 8:59:12 AM. I want to change these to YYYY-MM-DD format, but no matter what I try the format will not change.
View 4 Replies View RelatedI am having an excel sheet where I enter the delivery dates. There are few freezes and restricted dates.
When I am entering the delivery date which falls under the freeze or restricted date, the colour of that cell should change.
How to achieve this either using some macro.
I am trying to change the colour of a cell based on the expiry date. I know I need to use conditional formatting but Im having trouble.
Colomn E from row 5 to 1200 have dates in them from as far back as 08/2013. I need to change the cells so they turn yellow after 28 days and red after 45.
E.g. 1. E953 has a date 07/09/2013, I need it to change colour as above, 28 days and 45 days.
2. E961 has a date 04/10/2013, I need it to change as above, 28 days and 45 days.
Can I formulate the entire E column so when I put a date in, the formula will automatically start.
All the other formula's I've seen involve starting from "today" or "now" .
I have a simple due date spread sheet for tasks that need completing at work. I am able to make the 'Due date' cell turn red when it is equal to or less than todays date, using conditional formatting. No problem.
I also have a 'Date closed' cell which is populated with a date when the task is complete.
What I am struggling to do however is change the red 'Due Date' cell to Grey once the 'Date Closed' cell is populated with a date. In fact I would like the whole row to be greyed out once the 'Date Closed' cell is populated.
I also have an 'Open / Closed' cell, which tells me if a task is open or closed, being chosen from a drop down I installed. Could this be used as an alternative to the 'Date Closed' cell. ie If someone selects 'Closed' in cell A4 the whole A row goes grey.
If you look at the file I attached you will see the tabs at the bottom are months of the year. I know how copy a sheet but every time I make a new month tab I have to retype the month in the top left corner of the table, in the tab, and other places. This gets really repetitive when I have to do this for literally around 20 other spreadsheets like this.
What I'd like is a way to create new month tabs that automatically rename the month and year in chronological order on the sheet and tab if possible. 2 months it's because I'm constantly having to tweak spreadsheets for my boss. It'd be pointless to go ahead and make a template because then I'd have to go back and change the code for every month. So I just create tabs and edit code month by month.
I have a pivot table with dates along the x-axis. The data is spread out over 5 years and the spacing between sampling events is not even, therefore, the spacing of my x-axis dates is not even. I want the x-axis to look similar to a normal graph where there is equal space between each month, even if I don't have data for each month. I do not want to group the data to accomplish this. If I click the "show items with no data" it only shows one extra day, not all days or even all months. I have excel 2010.
View 2 Replies View RelatedI am building an excel folder with 200+ work sheets in it. there is a master sheet which i collect the rest of the data for the other sheets. My problem is, is that i want to be able to change the sheets quickly on the master sheet when i copy and paste or drag down. The formula that i am using in the cell on the master sheet is =SUMIF(sheet18!$B$4:$B$30,"rd1",sheet18!$E$4:$E$30)
Is there a way to quickly change the sheet from 18 to 19 to 20 and so on, or do i have to go into each formula and change it manual??
One cool feature of 2010 is ability to (right click on dates) and Group them into Quarters.
How to change the Quarters to be in line with e.g. Financial Year, as opposed to fiscal years? i.e. have a start date of say June?