Define Array On Different Sheet

Jan 4, 2007

I am having a problem defning arrays in VBA when they are on different sheets. When I do a step through the code it stops when I define an array which is not on the active sheet.
Sub MMULT_Test()

Dim wArray As Variant, xArray As Variant, yArray As Variant, zArray As Variant
Dim Fn As Object
Set Fn = Application.WorksheetFunction

a = Sheets("Inputs"). Range("G33")
b = Sheets("Inputs").Range("G34")
c = b - 1

View 3 Replies


ADVERTISEMENT

Find Cell Addresses To Define Match Array

Jul 17, 2009

= IF(AND(MATCH($B8, [AXS.xls]Sheet1!$E$1:$E$400,0) - 2 = $C8,
INDEX([AXS.xls]Sheet1!$B$1:$B$400, MATCH(CX$2, INDEX([AXS.xls]Sheet1!$B:$B, $C8 + 16):INDEX([AXS.xls]Sheet1!$B:$B, $C9), 0) ) ),
INDEX([AXS.xls]Sheet1!$A$1:$E$400, MATCH(CX$2, INDEX([AXS.xls]Sheet1!$B:$B, $C8 + 16):INDEX([AXS.xls]Sheet1!$B:$B, $C9), 0), 3), " ")

i have this formula, and i think it will work if i find a way to correct the blue areas. they are trying to define the match array. i tried using the address and cell functions with no luck. i just want the array to return something like B2:B15 (from the AXS sheet) so the match function works. in the current sheet, C8 and C9 have values that refer to rows in the AXS sheet

View 2 Replies View Related

When A Sheet Is The Active Sheet Then Define A Range

Dec 14, 2008

When a sheet is the active sheet i use the following to define a range.

View 6 Replies View Related

Define Sheet Level Name Range Code

Dec 3, 2007

In general defining Sheet Level Name Ranges works fine with me, most of the times I use something like shown in the code below.

However, I have discovered that apparently the successfull execution depends on the sheet-name format itself

The code below works perfectly fine with worksheet names like "234", "cas422", etc
but it fails to work with worksheet names like: "C12c", "eh34h4". It seems to me - but I am not sure of being able to generalize this - as if it works when the name contains [numbers][letters] or [letter][numbers], but it fails when it contains a mixture of both like [numbers][letters][numbers] or [letters][numbers][letters] .... in case of a failure of the code, I go into debug mode and simply rename the sheet, then everything's fine again.

Am I the only one to experience such difficulties? (I run Excel 2003 with SP3 on Windows XP) Or would a different code prevent this kind of trouble?

I think, I could write a workround, but before doing so I'd rather like to ask if I am doing something wrong here?

ActiveWorkbook.Names.Add name:=wks.name & "!myTime", RefersToR1C1:="=" & wks.name & "!R1C1:R5C8"

View 9 Replies View Related

Using Automated Index Sheet To Summarize Catalog - Extract Text String To Define Cell

Jun 10, 2013

I have a built a catalogue of records for various of my companies assets. Each asset has its own sheet in a work book and I have used a vb macro to include an automatic Index sheet at the front of the book. This takes the names of the various tabs, in the order I have them in the workbook and creates a simple listing in column A as an Index List

What I want to do is to build a summary table to the right of the Index List, pulling in a few of the key data points about the assets into a single table.

To do that I need to be able to extract the text string from the Index List and use it to form part of a cell reference pointing to a specific cell in the relevant individual Asset sheets.

View 4 Replies View Related

Find Last Sheet In Array

Jan 6, 2010

I need to find out how to create an array from multiple sheets and find the last sheet in the array. I've looked all over online, and can only find how to create an array of cells. Specifically, I need a loop to place each sheet in the array based on the value of a cell in the sheet (A1), and then with the last sheet, give the value of another cell (B1).

View 14 Replies View Related

Print VBA Array To A Sheet?

Jul 11, 2013

I have an array and I want to graph it. I don't know how to do that so I am trying to print it to a sheet and graph the data that way.

This is my array:

blkhist(service, 1) = DateDiff("d", blkstart, rawdata(currentdate, 1)) 'x axis values
blkhist(service, 2) = rawdata(currentdate, 16) ' y axis values
blkhist(service, 3) = blkcart 'series #

View 9 Replies View Related

Writing To Sheet From Array

Sep 29, 2013

I have an single dimension array called "Test". I have a range of one column called "Vol8_P1". Both are 1200 in size. I want to write the array to the sheet.

This code works:

i = 1
For Each c In [Vol8_P1]
c.Value = Test(i)
i = i + 1
Next c

But this code give me all zeroes:

Dim Destination As Range
Set Destination = Range("Vol8_P1")
Destination.Value = Test

I tried resizing "Destination" in the second code piece and that did not work.

View 4 Replies View Related

Getting Values From A Sheet Using An Array

Aug 17, 2009

I have made an array of variables and pasted them into another sheet using the range().value = myarray command. When I use the following command to put the values from this pasted set of variables into another array: ...

View 9 Replies View Related

VBA Array Formula With Row Count Of Another Sheet?

Mar 19, 2014

I am trying to use an array formula based on column A of sheet 1. Also using column A of sheet 1 last row ref for Sheet2 Array formula.

I have attached the document in here "Sample.xlsm"

When I run the macro for the dates, all I got is just "Date". I just want unique dates using the array formula which work without using VBA but the column A in Sheet1 is a dynamic sheet.

View 3 Replies View Related

Can't Get Cell Value To Be Sheet Name For Array Value In HLOOKUP

Mar 28, 2012

I have: =HLOOKUP(Table4[[#This Row],[parent_product_line]],UK_GBP!$B$11:$DK$65,4,FALSE)

What I want to do is have "UK_GBP!" be a valye which comes from another cell so I tried:

BE18 = UK_GBP

=HLOOKUP(Table4[[#This Row],[parent_product_line]],CONCATENATE(BE18,"!")$B$11:$DK$65,4,FALSE)

It errored out... how I can accomplish this?

View 3 Replies View Related

Copy Sheet With Times And Name Each According To Array

Jul 9, 2013

I would like to copy the existing sheet "Template" 17 times and each of the copied sheet should be names according to the order in the array:

"XX","TT","YY","WE","TG","KJ","IO","RT","EF","VU","GF","DW","QA","EZ","QU","OF","BB"

how this is done in VBA?

View 3 Replies View Related

Array Function Referencing Last Row Of Sheet?

Oct 10, 2013

I have this MAXIF array function that I am trying to use but I need it to reference the Last Row and not the absolute refererence. I am a novice at VBA. The first max if array is the one with my effort to try and get the last row. It doesnt work. The second one works but references the cell.

Code:
Range("U2").Select
Selection.FormulaArray = _
"=MAX(IF('Monthly Production'!R2C1:RC1 & LR=RC[-20],'Monthly Production'!R2C19:RC19 & LR))"
Range("V2").Select
Selection.FormulaArray = _
"=MAX(IF('Monthly Production'!R2C1:R8729C1=RC[-21],'Monthly Production'!R2C21:R8729C21))"

View 1 Replies View Related

Transpose Dimensional Array Onto Sheet

Apr 21, 2014

I have a dimensional array / matrix that is current a 9 by X, where x depends on the amount of entries a user makes.

Anyways my question is that I have a sheet called "Database" and I wanted to know if there was a simple code to transpose my array on that sheet starting at cell "A2".

View 3 Replies View Related

Reference To Name Range As Array From Another Sheet / Workbook

Jan 28, 2013

I have the below formula

=IFERROR(INDEX(Settlements!Account_No.,AGGREGATE(15,6,(ROW(Settlements!Account_No.))/(Settlements!Settlement_Date=TODAY()+1),ROWS(N$2:N2))),"")

I would like to copy it across and use different named ranges for the red part, hence have it reference to a cell with the name of the range.

i.e. (which doesn't work)

=IFERROR(INDEX(Indirect("Settlements!"&N1),AGGREGATE(15,6,(ROW(Settlements!Account_No.))/(Settlements!Settlement_Date=TODAY()+1),ROWS(N$2:N2))),"")

View 9 Replies View Related

Reference Array Of Cells Into Different Sheet Without Spaces

Jun 24, 2014

I have attached what my problem is. Have a look, and let me know what you think...have spent hours trying INDEX, MATCH, IF, ISTEXT...

JamesExcel problem.pdfExcel problem.pdf

View 2 Replies View Related

Index / Array Return A Value From Same Column In Another Sheet

Jun 2, 2009

I am currently looking at a simple data set spanning a few years of annual average data. I want to create a front sheet to show people in what year the maximum value was reached for each site but am having trouble returning the values......

The summary sheet is headed:......
I want the formula to say - find the summary sheet max value cell in the main data sheet row 2 (for XYZ) and return the corresponding column from row 1 (year). I've got myself in a muddle trying to create array data from the index function and want something simple. There are only about 30 rows so am happy to manually select the rows in question and repeat the formula entry so it doesn't need to be fancy.

View 2 Replies View Related

VBA - Searching For Elements Of Array In Active Sheet

Aug 5, 2013

I'm trying to write a macro which will find members of an array on a sheet, highlight the column and then change the format of the column, what I have at the moment is:

Dim datearray(1 To 3) As String

datearray(1) = "Date1"
datearray(2) = "Date2"
datearray(3) = "Date3"

For x = LBound(datearray) To UBound(datearray)
Cells.Find(What:=x).Activate
ActiveCell.EntireColumn.Select
Selection.NumberFormat = "m/d/yyyy"
Next x

End Sub

The problem is, when I "F8" my way through the code, it doesn't seem to be finding the members of the array in the sheet.

View 3 Replies View Related

Place The Contents Of An Array Into A Column On The Sheet

Nov 26, 2009

I am trying to place the contents of an array into a column on the sheet. I can enter the array into 1 cell (which strings the values), but I can't seem to make range(1)=array(1).

View 9 Replies View Related

Return To Original Sheet After Print Array

Jun 14, 2006

The code prints a series of sheets. Afterwards these sheets are "group"ed together. The code can be accessed from 2 different sheets. I need to figure out how to get rid of the grouping and return to the original sheet.

Private Sub CommandButton1_Click()
Sheets( Array("Pipe", "Pipe Flow")).PrintOut
UserForm1.Hide
End Sub

View 2 Replies View Related

Copy Table Values To Array Variables And Use Them In Another Sheet?

Nov 20, 2012

I have a query about using Array Variables in excel VBA. I have a set of lookup tables and a main data table. The data table will be downloaded everyday. I need to replace the ID's in the main table with actual data from the Lookup tables.

e.g.
Main Data Table
Color Operator
005--325 005
004--326 004
003--327
001--328
002--322

Lookup Color
001 - Red
002 - Blue
003 - Green
004 - Violet
005 - White

Lookup Operator Table
323 - Operator 1
324 - Operator 2
325 - Operator 3
326 - Operator 4
327 - Operator 5
328 - Operator 6

I have a huge amount of data in the main table. So I can't use a lookup formula for automation. Rather I would like to use VBA to create array variables, scan and copy the lookup data into the array and replace the ID's in the main table.

Only that I am unable to achieve this using arrays. I am very basic in executing code related to Arrays.

View 2 Replies View Related

Reduce Macro Perform Array Of Sheet (not All Sheets)

Feb 3, 2010

How can I make this macro easier (smaller)? The same action is performed on an array of sheets (not all sheets).

View 4 Replies View Related

Table Array Sheet In VLookup Formula Be Based On Value From Another Cell

Mar 4, 2014

I would like to have vlookup formua. And I would like the sheet for the table array section be linked to a cell value. So in my workbook this is my vlookup formula:

=VLOOKUP(B2,sheet1!B2:C8,2,FALSE)

I would like to to be something like =VLOOKUP(B2,(=b3)!B2:C8,2,FALSE). This way I can change the value in B3 and the vlookup formula will look for values in a different sheet as opposed to the one I originally designated in the formula.

Here is my workbook: Book1.xlsx

View 4 Replies View Related

Calculate The Cells In Sheet Containing A Large Number Of Array Formulas

Oct 14, 2008

I I have a excel document which has a sheet containing a large number of array formulas.

I turned the automatic calculation off.

However, even when I press F9 to calculate the cells it just crunches, gets stuck at “Calculating 0%” and then crashes.

The majority of the array formulas are IF queries with multiple criteria.

Would it speed up the calculation if I didn’t use array formulas?

View 2 Replies View Related

Create A Dynamic Array So That When A User Enters The First Sheet Name Via An Input Box

Nov 20, 2008

I'm trying to create a dynamic array so that when a user enters the first sheet name via an input box, excel will know to select the other sheets with ending (2), (3), (4) etc.

Currently this code works only if there are 4 sheets present (as I set this way), anything lower/higher is out of range.

How do I make it so that it will select sheets if there are less than 4 sheets present?

I tried nesting, but I pretty sure this array needs redimming or something. Is ubound a better option?

View 5 Replies View Related

After Unhiding Array Of Sheets How To Automatically Take User To Lead Sheet

Jun 27, 2013

I have the below VBA code associated with a sheet called "Select View". When the workbook opens there is another code that displays only "Select View", all the other sheets are hidden. In "Select View" there is a data validation list. Based on the selection the user gets to see only certain sheets. For example, if the user selects "Region 1" they see only the sheets "Region 1", "Panama City" and "Pensacola".

As you can see some of the names in the "Target.Value" are the same as sheets in an array. The ones that do are lead schedules, that is information from other sheets in an array roll into it. That is values from "Pensacola" and "Panama City" flow into "Region 1", the lead sheet.

What I am trying to do is finish the code where based on the "Target.Value" selected it automatically takes the user to the lead sheet. For example, when the user selects "Region 1" in the data validation it takes the user directly to the sheet "Region 1". The user of course can also see the other sheets in the array, that is "Pensacola" and "Panama City" and can manually select the tab to view or go into one of the later

Private Sub Worksheet_Change(ByVal Target As Range)
Dim sh As Worksheet
If Not Application.Intersect(Range("B10"), Target) Is Nothing Then
For Each sh In Sheets(Array("Panama City", "Pensacola", "Region 1"))
sh.Visible = Target.Value = "Region 1"
Next sh

[Code]....

View 6 Replies View Related

Write Names Of Named Ranges Of Specific Sheet Into Array

May 21, 2008

I am trying to enter only the named ranges in the active worksheet into an Array.
The amount of named ranges can be from 4 to 7 per sheet.

I'm self taught at VB (This posts on this forum have taught me - thank you!) and have got the below code working on a Workbook - but not on a worksheet level.
ActiveSheet.Names.Count returns nothing, changing to ThisWorkBook.Names.Count returns the sum of all .Names in the workbook.

Sub aTest()
Dim sArray() As String
Dim sJoin As String
Dim y As Long

x = 1
y = ActiveSheet.Names.Count
z = ActiveSheet.Name

View 3 Replies View Related

Dynamic Sub Tables Based On Master Sheet Array Formula And Drilling Through?

Feb 11, 2014

I have 7 sheets including the table as you can see on the attached. Now, each sheet is allocated to individual items e.g. item 10, item 20 and so on. I can't figure out how to return all the Item 10, 20, 30 ... to the corresponding sheet. It says Item 40 to all sheets.

View 8 Replies View Related

Copy Entire Excel Sheet Cells Values Into String Array?

Mar 3, 2014

How to copy the content of cells from an excell->sheet1 to an string array

View 2 Replies View Related

Define Value Between Two Dates?

Sep 23, 2012

1. I am entering the prices of a hotel. And the hotel has different prices in different periods.

For ex: 03/07/212 - 04/06/21 128$

I don't want to define it as an array in Sheet1. I want to enter start date A1 and end date to A2 and the price A3. And to the next column next period definition and so on...

2. After I define all dates like this when I will create a date array at Sheet2 in A column, I need a formula to make excel call the values to column B automatically to the proper dates.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved