Is there a way to detect a change of pages in a Multipage form, i.e. is there a change event that is triggered when a user goes from page 1 to page 2? If there is, what does the code look like?
View 5 Replies
I am trying to add more pages to the mulitpage form in the toolbox. How to add more "Pages" to the Multipage form?
View 2 Replies View RelatedIf I enter emp Id then it should search in my mastersheet and if data found then display.
If records not found then after clicking on add button.
Employee information page should activate and my cursor should be on emp id.
I have developed attached file : My Data Entry Form.xlsm
I have a userform1 with multipage 1 which has 5 pages. Is it possible to select page 1 from a label on page 5. I have the following code assigned to label 18 on Page 5 but I can't get to Page 1. In fact, the code does absolutely nothing.
Private Sub Label18_Click()
MultiPage1.Value = 0
End Sub
I have a UserForm with a MultiPage form on it. Page1 is a totals page with 3 TextBoxes. Page 2 and counting are item pages. Each page also has 3 TextBoxes (nutrients for that item).
Purpose is to add all of the values in the first TextBox on pages 2 + and place the total into the first TextBox on page 1. Repeat this for the other two TextBoxes.
The problem is that I have no way of knowing how many pages I will need!
Is there a way to add a new page to the MultiPage and copy all of the formatting and controls from the formerly last page on to it? I would like to do this with an "Add" button.
Using Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range) I can execute code when values in the cell change, but it can't check if the foreground or background color changes. What event can detect this? If no event can, is there any way at all?
Found this, I will look into this loop: Capturing cell color change in VBA
How to detect a change in a spreadsheet, but how do i etermine on which cell the change happened?
Basically, I need something like this, if in the range of b1:b30 a cell is changed by the user, let say B??, then change or modify (via a subroutine) cell A??.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
'
' detect which cell in the range b1:b30 changed
' then modify the cell to the right (or left) of the changed cell
'
End Sub
I have a user form with four pages. I would like to disable pages 2 and 3 if the checkbox on page one is cheked. I know the pages have a property called "Enabled" but i can't figure out how to code this.
The user form is called frmAnvilProgNew
The pages are called Page1, Page2, Page3, and Page4
The checkbox is called Check1
see the attached workbook. Is this possible? Should I be using tabs instead of pages?
When I drop a multipage control onto a worksheet, the control defaults to showing/having 2 pages. I looked at the various properties and there doesn't seem to be a way to change/add to that number of pages. I know I can add pages to the control programmatically. But what if I don't want to do it that way? What if I want to set the control to show 3 pages instead of 2 at design time? Is there a way to do that?
View 3 Replies View RelatedI have a MultiPage control that has 67 TextBoxes on it, changes to 14 of these TextBoxes will trigger a public subroutine called TB1Refresh. I have a TextBox and a ComboBox just above the MultiPage control. The ComboBox is set as a MultiColumn. The ComboBox is working. The TextBox is called TB1. The first TextBox on the MultiPage is called TB2. There are no duplicate names on this UserForm. When I scroll though the list in CB1, the values in the TextBoxes on the MultiPage scroll as the they are supposed to. The problem is that every time one of the 14 TextBoxes changes, the subroutine is supposed to fire. Here is the code I use in two of the TextBoxes to fire this sub:
Private Sub TB8_Change()
TB1Refresh
End Sub
Private Sub TB9_Change()
TB1Refresh
End Sub
I put a MsgBox at the beginning and the end of TB1Refresh to see what was happening. They never fired! So the question is, why won't the subroutine fire when called upon to do so. This code was working before I added the MultiPage to this UserForm,
I am running into a problem with a macro. I have the block of code below repeated about 30x in vba. When I went to create a new list box, ie: "List Box 2", in a new sheet it is not working.. The code is the exact same, but it is not working at all.
[Code].....
This is the second code for the second Sub
[Code] .....
I'm trying to execute a macro and it won't put the focus (radio button) to select x pages wide by x pages tall in the Page Setup/Page/Scaling Area. I looked at the macro and can't find a setting in the code but yet the focus won't change. What can I do about this? In other words the radio button stays selected as "adjust to "" % of normal size. Here's the code...
View 2 Replies View Relatedhow can I change the button/shape name of a Form Button in Excel 2003? I assigned a name using the NameBox, however if I try to change the name via the NameBox, it does and work and the old name remains.
View 4 Replies View RelatedI am printing a UserForm to a PDF printer and was wondering if you can change the default name "Visual Basic for Applications" name at the time of printing? I am auto-saving and need a value from my UserForm. I must print to pdf printer as the "Export to PDF" does not work for what I am doing.
View 2 Replies View RelatedI have a company and I try to keep a record of all my clients in Excel. Below, you can find a simplified example:
2014-04-07_105615.jpg
Now, I have so many clients that my Excel file is quite large. So when I want to change the status of a contract, I have to manually look up the file number and change the status manually.
What I ideally would like, is a form that says:
Change status to paid: xxxxxxxx
Where the x's are, I would have to enter the file number, press enter and the corresponding status should change to "paid". I have about 30 contracts a day that change status.
I tried to "draw" what I mean:
2014-04-07_110609.jpg
Is this possible in Excel? And how is it done then?
I have user form that I want to get rid of the close button that appears as an x in the upper right corner. Is there a way to have this not show when the form comes up ?
View 2 Replies View RelatedI have a button wich will add data entered on a form to a spreadsheet if the data meets certain criteria. If it does not it will not let you add anything. I would like to add a second button that will add the data even if it does not meet the criteria but I need the second button to only be enabled with a password. Maybe a macro to change the button properties from locked to unlocked (true to false).
View 2 Replies View Relatedit's possible to change the caption (title) of a user form to a variable or cell value? Or does it always have to be hard coded?
View 2 Replies View RelatedThe list boxes on my Form all have a dark blue backround which makes it hard to tell when the box has been selected for data entry. Could someone tell me what item in the "properties" window controls this function.
View 14 Replies View RelatedI have a combo Box (Form Control) in my spreadsheet which is basically used as a drop down menu.
How do I change the font size of the text that appears in the box?
I have a spreadsheet with several freeforms. I would like them to change backgroundcolour, if the content in a cell is equal to another cell.
Basically I would like my shape "Freeform1" to change backgroundcolour to RGB (0, 180, 0) if Sheet1.Range ("A1") = Sheet2.Range("D3").
If it's not the same content in both cells, I would like the freeform to remain unchanged, that's RGB (79, 129, 189).
This should happend automaticly, so I don't have to click the shape to make it happen.
Is there a way of detecting, when printing, that a cell is at the top of the page?
I am not talking about the automatic "Rows to repeat at top" option on Page Setup; I have programmatically suppressed repeating information in Column A but I want to repeat that information if the column is fed to a new page.
Would like to detect same value in 3 cells.
Q 16, R 16, S 16
If there is a same value appearing in two of the three cells.
I've written a macro to copy data from a series of columns on one sheet and past it on another sheet in a specific way. However, what I really want to do, is write the macro so it automatically detects what the last column is, either by defining a range consisting of the last column, or by writing "Last Column" in one of the cells of the column, and having the macro detect it.
Dim i As Variant
For i = 5 To 56
' What I want to do is have the second number be the last column, instead of 56.
Sheets("MASTER").Select
Selection. AutoFilter Field:=i, Criteria1:=">0", Operator:=xlAnd
Range("Basic_Data").Copy
Sheets(" Consolidate").Select
ActiveSheet.Paste
ActiveCell.Offset(0, 4).Range("A1").Select
Sheets("MASTER").Select...........................
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE"
I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
I have a multi-worksheet workbook that has many forms control checkboxes throughout it. I'm looking for some VBA that will change the background (fill) color of ALL the checkbox when it is checked (True). I've seen code for a single checkbox, but not multiple/all boxes. I know just enough VBA to be dangerous, but I'm up to learning anything new.
View 3 Replies View RelatedI have an Excel 2010 workbook with many worksheets using hundreds of Form Control (not ActiveX) checkboxes. I need a bit of VBA to change Checkbox background color of each checkbox whenever the user checks the box. I assume this needs to be a click event? I don't even know the Checkbox property name I need to change I'm learning VBA as quick as I can
View 4 Replies View RelatedIn my company we have many spreadsheets with sections that contain formulas, which may be overwritten with "hard coding", manually entered constants, in certain situations.
Is there a way I can detect the differences between the two types of cells? I would like to setup conditional formatting that would highlight constants in a table that would generally only contains formulas.
It worked well at the time and continues to work well.
The problem I have is that I've copied it for use in a new workbook and for some reason it's not picking up email addresses and storing them in the string "stemails", so that when the email is created there are no addressees. Column BA does have email addresses in it however.
[Code] .....
How could I detect if the CTRL (Control) or ALT key has been pressed. I want to execute a macro when either one is press over a given cell.
View 3 Replies View Related
