I have a MultiPage control that has 67 TextBoxes on it, changes to 14 of these TextBoxes will trigger a public subroutine called TB1Refresh. I have a TextBox and a ComboBox just above the MultiPage control. The ComboBox is set as a MultiColumn. The ComboBox is working. The TextBox is called TB1. The first TextBox on the MultiPage is called TB2. There are no duplicate names on this UserForm. When I scroll though the list in CB1, the values in the TextBoxes on the MultiPage scroll as the they are supposed to. The problem is that every time one of the 14 TextBoxes changes, the subroutine is supposed to fire. Here is the code I use in two of the TextBoxes to fire this sub:
Private Sub TB8_Change()
Private Sub TB9_Change()
I put a MsgBox at the beginning and the end of TB1Refresh to see what was happening. They never fired! So the question is, why won't the subroutine fire when called upon to do so. This code was working before I added the MultiPage to this UserForm,
I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.
I have a couple different code set ups in the attached sheet and neither works.
As part of a program I'm writing in VBA (for Excel 2010), I have a textbox in a user form used as an interface to write a formula in cells in Excel.The resulting value of a formula from a cell is loaded up into the textbox. It would be shown in the textbox like "See 1.2 and 1.3" where the formula in the cell is
This is just used as an example but the principle is there. It is worth noting that I’m writing this for very inexperienced Excel users but I need them to be able to edit the string part of the formula without breaking the formula.
However where I’m struggling is to pick up a selection change event inside a text box already selected. I need to be able to check if the textbox.SelStart is within an address value or within the string in the textbox.
The event Enter won’t work if the user is already editing the textbox (i.e. typing stuff) and then clicking or using the keyboard arrow to move the cursor somewhere else inside the textbox. I don’t think the event Change is the solution either as it would mean that the user would have already typed something and as a result the formula may already be broken.
I have had a good look around and I didn’t find an event for a selection change inside a textbox. Does it exists and/or is there a way that would have the same result?
I have a two-page multipage form. I have a textbox on page 1 (txtOccupantLoad), and I want to pass the value from that textbox to another textbox (txtOccLoad_L1) on page 2. The code I've tried so far looks like this:
Private Sub cmbChooseLevel_Change() If Me.cmbChooseLevel.Value = "Level 1" Then Me.txtOccLoad_L1.Value = Me.txtOccupantLoad.Value End If End Sub
What I'm trying to do is to use the same form for 10 different levels (floors) of a building. Then on page 2, I'll itemize the values for each floor. So the combobox determines which floor the calculations are for; txtOccupantLoad is the total of all incremental occupant loads on that floor; and txtOccLoad_L1 is the first of a series of textboxes on page 2 where the value for Level 1 should go. If the combo box shows "Level 2" then I'll write new code for the txtOccLoad_L2, and so on. I've also tried including "page1." and "page2." after "me."
The code below works when the textbox (txtExt) is not within a multipage but doesn't when it is. I'm presuming i need to reference the multipage and page number but can't seem to get the right syntax.
Private Sub txtExt_Exit(ByVal Cancel As MSForms.ReturnBoolean) Details.Activate Dim agExt As String Dim extFind As Range agExt = txtExt.Value Data.Range("M3:M120").ClearContents With Details
Set extFind = Range("B1") For lCount = 1 To WorksheetFunction.CountIf(Columns(2), agExt) Set extFind = Details.Columns(2).Find(What:=agExt, After:=extFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False) With extFind...................
i have this userform which has 20 textboxes. these boxes are used for numbers only. however, i want my numbers, as i type them, to appear in the boxes with thousands separators. even if i don't type the commas, the numbers will be formatted as if i typed them with such. Do i have to format the textboxes one by one for the formatting that I want or there are codes that could be used for all these textboxes?
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
When I drop a multipage control onto a worksheet, the control defaults to showing/having 2 pages. I looked at the various properties and there doesn't seem to be a way to change/add to that number of pages. I know I can add pages to the control programmatically. But what if I don't want to do it that way? What if I want to set the control to show 3 pages instead of 2 at design time? Is there a way to do that?
I create a series of labels and text boxes at runtime.
Code: for x = 1 to 10 labelName = "label" & x Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True) next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
I have a Userform with a textbox1 and a commandbutton. TextBox1 triggers a code on the exit event. CommandButton1 simply unloads the UserForm. If a user enters data in the textbox, but does not exit and instead clicks the commandbutton to unload the UserForm, the exit event code is still triggered and then for some reason the commandbutton no longer responds to being clicked. I can't seem to find a way around this.
If the commandbutton is clicked, I simply want the UserForm to be unloaded and the exit event for the textbox ignored
I have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.
I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
I have a chart with 2 Y axis. I am attempting to write some code that will update both axis with the same max & min value that is triggered by the combobox selection. The code will update the axis but is not triggered by the combobox selection.
I want to know if it is possible to have 2 workshhet change events for one sheet. Let me explain this. Presently I have one workshhet where if any value ie entered in column A automatically date and time is entered in column B. I can do this by using folloing code.