I want to write a macro that will check every selected cell. It should detect if there is a space after the fourth character. If there is a space, go to the next selected cell. If there is no space, add a space and go to the next selected cell.
View 5 RepliesAutomatically format a textbox on a userform so that it puts a space immediately before the last 3 characters, regardless of how many characters are put in?
View 9 Replies View RelatedI have following kinds of texts in a column.
MISCELLANEOUS
EQUIPMENT
JBKU348597-3
T-225
75984
I want to convert above texts with space between every character as follows:
M I S C E L L A N E O U S
E Q U I P M E N T
J B K U 3 4 8 5 9 7 - 3
T - 2 2 5
7 5 9 8 4
I am trying to find numbers before a space character.
For example...
In column 1..................to return in column 2
23 cars................................................. 23
5 trucks................................................. 5
150 vans.............................................. 150
I can't use MID Function as it can be 4 numers long...
I am looking a macro which should perform below activities
I have a lists of suppliers which needs to cleansed....
1.replace all the special characters with a space
2.replace Corporation with Corp
Incorporation with Inc
Limited with Ltd
Limited partnership/ltd partnership with LP
Company with Co
ASSC/ASSOC with ASSOCIATION/ASSOCIATES (SEARCH SUPPLIER IN GOOGLE FOR THE CORRECT ONE)
MGNT with MANAGEMENT
SVCS with SERVICES
DEPT with DEPARTMENT
Unltd with UNLIMITED
Ctr with CENTER
UNIV with UNIVERSITY
3. Remove any text, Special characters and numbers after INC,CO, LTD, CORP,LLP, LLC
The macro should when I select any particular column... not restricted to column A
I've a column of data as below:
ROACH (#21)
SHARK (#11)
SHARK (#13)
UNICORN (#26)
ROACH (#20)
TRIGGER (#09)
UNICORN (#06)
UNICORN (#09)
UNICORN (#11)
VIMBA (#03)
VIMBA (#04)
TRIGGER (#06)
ROACH (#07)
ROACH (#08)
ROACH (#10), UNICORN (#24)
What I need to do it to strip off all the characters after the first space.
I assume I can use FIND and then LEFT, but how to I put this into a Macro?
I need to add spaces to a string of characters so that it is readable, the database is huge so I cannot do it manually:
For example,
123456John Doe 3456Adam Sharp I need it to apperar as:
123456 John Doe 3456 Adam Sharp
but still remains at the same column. Is there a quick way to do this ?
I am trying to write a function that finds and breaks a cell about the first space.
Worksheet is:
=LEFT(name,FIND(" ",name)-1)
Have tried...
Function Firstname(name)
Dim Space As Integer
Set Space = .Find(" ", name)
Firstname = Left(name, Space)
End Function
and also...
Function Firstname(name)
firstname = left(name,find(" ",name)-1))
End Function
I have text string and would like two formulas to find,
1) the characters after the last space and
2)to find the number of characters after the last space.
I have text string and would like two formulas to find, 1) the characters after the last space and 2)to find the number of characters after the last space.
View 9 Replies View RelatedI want to remove the front zero(s) from the front and put a space before the last two letters for the following column of data in Excel:
0001MG
0020MG
0100MG
1000MG
Final result will have this format and the data are right aligned.
1 MG
20 MG
100 MG
1000 MG
The numbers can vary (e.g. 0150MG, 0025MG,etc.) but the arrangement is always the same: four figures for the first 4 characters and two letters for the last two characters.
The format of the cells containing the data is: “General”
My table has 7 columns and these data are in the 5th column in a worksheet called “ProductSummary”. The number of rows for the records can vary from 10 to over a couple of hundred.
How can I use VBA to: 1) automatically select the table range in that worksheet and reformat all the data in the 5th column.
Using VBA, how can I determine if a cell contains only white spaces and NO valid characters?
View 2 Replies View RelatedI can do this in Excel, but I don't seem to have a single example to hand of how, using VBA, to extract all characters up to but not including, the first space character in a cell.
View 9 Replies View Relatedusing this format *.#,##0_);*.(#,##0);*.0_);@*. I get this:
Bonds..................................
would like custom format to do this,
Bonds . . . . . . . .
note:@ sign activates text formatting, *=repeats .=character being repeated
I've tried putting space characters before and after the period - no luck
When a file is open, if cell A1 has a text "Hello there", then I want to make this cell add a blank space as "Hello there ". Let's save this file and close. So now if I re-open it, I want cell A1 to remove the added blank space and revert to be "Hello there". This take turns to change back and forward.
View 8 Replies View RelatedI am using the macro below to count the number of specific character in a cell. The only problem it only counts one cell. How do I modify to display multiple cell counts if more than one cell is selected?
[Code].....
I have a column which cells are populated with codes like
BGW
3UG
WWU
1BR
UUBRG
WUBRG
7UUGGRRR
and so on. As you could see, we'll always have a number from 1 to 20 (or no number at all) followed by those letters (which can be only W,U,B,R or G). I'd like to know if there is a function to count the # of times a particular character occurs in a colum. In the above example, the "U" character appears 8 times. This would be nice to automate part of the filling process.
Just a little difference: since numbers always come before the letters, I need to treat a number sequence as a single value: 12GWW should not be seen as 1 then 2, but "twelve", like it was a single character. So, if I have this column...
URR
12WBBB
6UBG
12R
12WG
...then "12" appears 3 times. Nevertheless, B appears four times (3 on line 2 and 1 on line 3.)
I need to come up with a formula to verify that the last 3 characters of a text string match the 3 characters in the adjacent cell. So I am comparing in the example below Column B to Column A.
Ex:
A1 010 B1 3.010
A2 010 B2 1A.010
My spreadsheet is very large and I need to get this done without manually having to look at each.
If character or letter "A", or "B", and so on (until "J") is found both in Column A and Column B in a given row, then it is TRUE.
If no character or letter (from A to J) matches in both columns, then FALSE.
**Numbers are irrelevant.
Is there a formula to show (true or false) whether a cell contains any characters that aren't a letter or number without resorting to vba?
View 9 Replies View RelatedI have a textbox in a form and i need to check if the text posted there begins with zero or if it contains spaces. Ex:
05E 9050 01
if this is the text then it shoud warn me becouse there is a zero in the begining and it contain spaces
4P 565001
if this is the text then it shoud warn me becouse there is a space
In my column of text strings, I have a multiple format of strings make-up. Below is just one of them I have to check that the first 6 are digits from 0 to 9, and it is followed by a hypen. If condition is true, the first 6 digits is the output (ie. 345678).
345678-S
=IF(ISNUMBER(--(MID(A1, FIND("-",A1)-1,1))--(MID(A1,FIND("-",A1)-2,1))--(MID(A1,FIND("-",A1)-3,1))--(MID(A1,FIND("-",A1)-4,1))--(MID(A1,FIND("-",A1)-5,1))--(MID(A1,FIND("-",A1)-6,1))),LEFT(A1,FIND("-",A1)-1))
However, if I were to continue doing this for other strings, I would soon run out of characters limit that is allowed in a cell. I wonder whether a formulae such as below is valid? Any suggestion or help for a shorter formula is very much appreciated.
=IF(ISNUMBER(--(LEFT(A1,1+1+1+1+1+1))),LEFT(A1,6))
This works...
If Not Intersect(Target, Range("E1")) Is Nothing Then
However..
How do I change Range("E1") to any cell on row 1?
I need a formula that will search the range D8-D100 to confirm that all cells within that range are either 11 characters in length or blank. I will use it inside of an error message that will look something like this:
=IF(****formula that checks to make sure all of the cells in that range are blank or 11 characters****=TRUE, "", "Please make sure that all cells are 11 digits or blank")
I have a database of names and titles (acutally: #, last name, full name, title, meeting) and at this point I have a column using the following code.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Not Intersect(Target, Range("A5:A355")) Is Nothing Then
Range("A5:A355").Cells.Clear
Target.Font.Name = "Marlett"
If Target = vbNullString Then
Target = "a"
Else
Target = vbNullString
End If
End If
End Sub
everything works like I want, except when I use the auto filter, the "a" won't be cleared from cells that are hidden. I need to make sure only one "a" is populated in this column as that's what I'm using with the vlookup function to key the data for my Character Generator.
Maybe I'm not using the best code, I'm new to this and just cobbled together code from a few different places.
Some quick background to what I'm doing, but you may not need it to help. I'm trying to use Excel to populate some cells that will tell our Chyron Character Generator (for those that don't know what that is, it's the device that puts graphics on screen during news programs, etc...) what to put up for lower third titles (and more) for our meetings we cover.
Is there a way to extend the space of my userform beyond its maximum space? I have tried using vertical scroll bars but they were of no use.
View 1 Replies View RelatedI have been working on different formulas to return the text string between the first and last space and have been unsuccessful. Is this possible?
I have tried several combos or Left and Right, I have been able to get the values after the first space, and the values before the last space, but not between the spaces.
String: Y60
~C CULT NUCLEUS 3X2 SPRING WST BK XL
Desired results: D60
CULT NUCLEUS 3X2 SPRING WST BK
I have two words of differing character lengths separated by a space.
How can I remove the first word... essentially, all the charcters to the left of the space AND the space itself?
I have the following formula that works fine until someone uses the space bar to clear a cells contents
=COUNTA($D11:$AI11)
When the space bar is used to clear a cells contents the COUNTA statements includes the space in the count. How do I count the number of cells with content and exclude the space bar space in a cell?
If find dot. with out space in ( A1 ) cell remove space after dot in cell ( B1 ) Cell, vb or macro
A
B
M V Micunovic
MICUNOVIC,M V
L.T.Kudrjavceva
KUDRJAVCEVA,L. T.
D Sumarac m.l.
M. L,D SUMARAC