Copy Ranges & Add Them To Other Ranges
Nov 1, 2006
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A
then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
View 9 Replies
ADVERTISEMENT
Oct 25, 2007
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
View 5 Replies
View Related
Feb 26, 2010
definitions for static ranges and dynamic ranges?
View 9 Replies
View Related
Mar 9, 2014
In sheet x the range("d2:d20") will change from time to time. I've created a button that should copy this range("d2:d20") to sheet called summary and there to the next empty column. So the variable lstcol (dim = long) is the last empty column in summary. I'm definitely not using properly the range method.
View 8 Replies
View Related
Mar 7, 2013
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
"
A B C D
| SUMMARY
model qty| modelqty
1 4.12922.0000| 4.12952.2000
2 2.000012.1250| 2.000025.1250
3 4.12929.0000| 318.0000
4 318.0000|
5 4.1291.2000|
6 213.0000|
"
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
View 1 Replies
View Related
Jul 12, 2013
how to copy contagious selection
when we select like this it says the command cannot be allowed on multiple selection
View 6 Replies
View Related
Mar 1, 2012
I have filter in three columns, column F, Col J, and Col L. I need to filter the range based on my input and copy the filtered range. My input will remain same for all three filters, it should copy the filtered range based on my input and paste in sheets (4) of my workbook.
I am expecting three filtered range in sheets(4) one after another with teh header data.
View 5 Replies
View Related
Apr 27, 2007
I have a workbook with about 25 named ranges that I would like to use in a a different workbook. Is there some way to copy them, or a way to transfer them through code?
View 9 Replies
View Related
Oct 28, 2011
I am trying to write a basic VBA code to effectively remove the formulas from a workbook to reduce the size. I want to save the formulas in one hidden row above the data and have the macro select this row, copy the formulas down to the data, calculate the sheet, and then copy and paste the new calculated info and paste as values
Issues making this more difficult:
1) The number of rows of data is not constant, therefore I believe I need to make vba count the rows of data and therefore know how many rows to paste
2) The formulas are not in every column (E.g. A:C, E:R, AA:AD have formulas)
Here is a basic example:
A B C D E
1 FORMULAS (Hidden)
2
3 [Inv. Typ] [Material #] [Batch] [Qty] [$]
4 [FG] [545] [555A] [5000] [$250000]
5 [WIP] [984] [659A] [200] [$650000]
In this example I would like the macro to:
1) Copy the hidden formulas in (A1:B1, D1:E1)
2) Paste these formulas into the range (A4:B5, D4:E5) (*The height of this range is not constant)
3) Calculate the Worksheet
4) Copy and paste values to the range (A4:B5, D4:E5) (*The height of this range is not constant)
* I would like column C to be left alone.
View 4 Replies
View Related
Aug 16, 2013
I have data in column A separated by blank rows. I want to copy ranges between two blank rows, and paste it to sheet named "mega" so that each range is in its own column.This is code I'm working now.
Code:
Sub QuickSet2()
Dim rng1 As Range
On Error Resume Next
Set rng1 = Cells.SpecialCells(xlCellTypeConstants).EntireRow
On Error GoTo 0
If Not rng1 Is Nothing Then
rng1.Copy
Sheets("mega").Range("A1").End(xlRight).Offset(0, 1).Paste
Else
MsgBox "No constants found"
End If
End Sub
View 6 Replies
View Related
Jan 15, 2010
I have 2 workbooks formatted the same way.
Using VBA, I want to search through book1 Col A which has a list of Code # s.
If a Code # is in Book 2 Col A, find a match on Book 1 Col A.
After finding a match, compare the range in Book 2 ( Which is the 4 cells immediately to the right ) to the match with the corresponding range in Book 1.
If the range contents are not the same, copy the range from Book2 to Book1 and replace the range in Book1.
If there is NO Match of the Code # in Col A, then Copy the entire row to Book1 and append it to the end of the current Book1 used range.
A MsgBox to show how many changes and additions at the end.
View 11 Replies
View Related
Aug 22, 2006
Ok What I want to do is copy the info in Cells A1:N55 into cells A63 onwards, now this I have completed so far with the following code, but what I also want to do is copy any changes that are made in cells A1:N55 from when this copy function is run into cells A63:N118.
Does anyone know of any way I could go about doing this?
Sub CopyJob()
Dim wSheet As Worksheet, strWS As String
For Each wSheet In ActiveWorkbook.Sheets
strWS = Left(wSheet.Name, 2)
Select Case strWS
Case Is = "AJ", "CJ", "PJ" .......................
View 9 Replies
View Related
Aug 27, 2006
I have this
Sub transpose_UPCID()
Application.CutCopyMode = False
Range("A7:B7").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("BAUCS").Range("C11").PasteSpecial Paste:=xlValues, _
Operation:=xlNone, SkipBlanks:=False _
, Transpose:=True
Application.CutCopyMode = True
End Sub
This macro copies a range and paste it in another worksheet. I dont now how to make this macro to copy another range at the same time and copy it to row C37.
How can I make both things at the same time? The code I am showing here copies and paste product codes. I need to select and copy the production (which is in column F) for each product code and paste it starting in C37.
View 3 Replies
View Related
Nov 18, 2006
I'm facing a problem in copying the same ranges from 23 workbooks in the same folder. My code can only work for one workbook.
Dim r As Integer
r = 0
Do
Worksheets("Allocation& Trading").Range("A8").Offset(r, 0).Value = _
Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value
r = r + 1
Loop Until Workbooks("July-1").Worksheets(1).Range("A3").Offset(r, 0).Value = ""
I'm required to use the same procedure to copy one of the 23 open workbooks in one time into the worksheets("Allocation&Trading") of another new workbook, which means after using the procedure to copy some ranges from the workbooks("July-1"), I can reuse it to copy the same ranges from the workbooks("July-2") into that same worksheets("Allocation&Trading"). So my procedure has to be flexible enough to work for 23 times for 23 different workbooks in the same folder. Anyone has any idea how to use the same procedure to work for 23 workbooks seperately? I have tried out the codes provided in the similar threads, but they can't solve my problem. Can anyone enlighten me?
View 6 Replies
View Related
Dec 18, 2006
I'm trying to copy range from one worksheet to another. I'm guessing there must be something wrong with my syntax here:
For Count = 2 To 50
If Sheets("sheet1").Range("H" & (Count)) < 0.1 Then
Sheets("sheet3").Range("A" & (next_place), "K" & (next_place)) = Sheets("sheet1").Range("A" & (Count), "K" & (Count))
next_place = next_place + 1
End If
Next Count
View 4 Replies
View Related
Feb 14, 2007
we have two workbooks which do change daily. one with 'data' sheet containing 40,000+ rows of data in coloumn 'B' another with 'cust' sheet with 10,000+ rows of data in coloumn 'C' as a part of daily work we have to compare last part of the each cell in Cust sheet with data sheet
1. last 6 digits are compared and the results copied to 'cust' sheet from 'D' column and so on adjacent to the corresponding data.
2. last 5 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (1)
3. last 4 digits are compared and the results copied to 'cust' sheet from end of the aforesaid result (2)
4. any duplicate within the row to be deleted from left to right
as the data are enormous the work can be completed only 10 - 15 % manually.
View 5 Replies
View Related
Mar 2, 2007
I am not good at writing codes and so would really appreciate if someone could help me.
I have a range suppose A1:D50 which i want to copy it certain no.of times, say around 50 times below the original range or in another sheet.
Can a code be created where I have a useform , where I will be entering the number for eg.50, which will copy the range 50 times below the original range or in new sheet.
View 9 Replies
View Related
Oct 10, 2007
I want to select a range of cell relative to A2 then copy and paste that range 12 times.
See my coding below. I have been getting a Warning box titled "Microsoft Visual Basic"
(X) 400.
Sub mycopytry()
Dim check As Integer
For check = 1 To 12
Range(ActiveCell.Offset(29, 0)).Select
Selection.Copy
ActiveCell.Offset(1, 0).Select
ActiveSheet.Paste
check = check + 1
Next
End Sub
View 9 Replies
View Related
Nov 28, 2007
I have this excel workbook that when i tick the first sheet ("251" in temp), it copys the row onto the second sheet ("order" in temp). This all work wonderful, but now if i would like to add additional pages to this excel workbook and have it do the same thing (by same thing i mean adding additional sheets but keep only one "order" worksheet and have all the information go onto the order worksheet.
So for example:
I would add an additional page name 252 into the workbook, it would look and function just like the 251. So after all the ticking on 251, all the information would go onto the "order", i can then move onto 252 and do the same type of ticking of information and those information would also continue onto "order". And i can keep adding multiple worksheet onto the workbook and do the same exact thing.
View 9 Replies
View Related
Jan 17, 2008
I have a worksheet that has data in columns a through d. Acct#, Name, Usage Code, and Other Code. Acct# and Name are self explanatory, usage code is a two letter code, and other code is a field I added to use with my macro. A specific account number could be repeated many times, but it is the usage code I am needing to work with here. My acct numbers are sorted in numerical order and column d has a 1 each time a new account number appears and a 2 if it is a repeat. I am wanting to copy the account number of any account that does not have a specific usage code listed at least once. That specific code is "ta". I am wanting it to only list the account number once in column f starting at row 2. Here is my code that is not working.
Sub test()
Dim CopyNum As Integer
Set CopyNum = 2
Dim Switch1 As Integer
Set Switch1 = 0
View 3 Replies
View Related
Mar 6, 2008
In Excel 2007, is there a way to copy a conditional format from one cell to a range of cells. My conditional format is comparing the value of one cell say A1 to B1, and formatting the cell if the value is different. How do I copy this format to also compare A2 to B2, and C2 to D2 etc.
View 2 Replies
View Related
Apr 1, 2008
I have the following
wkbDataFile.Worksheets("Admin"). Range("January_Data").Copy Destination:=wb.Worksheets("Admin").Range("January_Data")
In some cases the range "January_Data" won't exist and the macro breaks. Is there a check I can have the macro run through first to ensure the range exists in wkbDataFile.Worksheets("Admin") before going through with the .Copy?
View 3 Replies
View Related
May 14, 2008
I have several ranges (i.e. c11:c22, and d11:d22, etc) in an excel spreadsheet that, when the command button is selected, will copy these values into another already established workbook ("aggregator.xls").
Thus, the command button would have to pick each of these ranges and copy them into the aggregator workbook, (i.e. c11:c22 in the first workbook would be copied into b3:b14 in the aggregator workbook; d11:d22 would be copied into b18:b29 in the aggregator workbook, etc.)
In addition, I need it set up so that when the command button is selected to copy this data, that it will look in the aggregator workbook for the next available column for the section that the data will be copied to so that it doesn't write over the previous data.
View 6 Replies
View Related
May 14, 2008
The "Sub Shortcut()" line is throwing the error.
Sub Shortcut()
Dim CellString As String
Dim BString As Boolean
Dim StrShort1 As String
StrShort1 = "Copy"
Sheets("Office - Generic").Activate
Range("A3:B14").Select
For Across = 1 To 12
View 5 Replies
View Related
Jun 9, 2008
I want the range B111:B167 from the hidden sheet copied to Column A of the questionnaire sheet 5 rows after the last used row on the sheet. There is text in cells C261 & S261 at the bottom of the sheet, so currently row 261 is the last row, but users could/might insert or delete rows, when answering questions. I then also want to copy the error check responses from C111:C167 to column N of the questionnaire sheet 5 rows after the last used row on the sheet, so the question # and response matchup. I then planed to delete any rows that have “Answered” in column N on the questionnaire Sheet. The Idea being the user can run the macro over and over until no questions remain.
View 3 Replies
View Related
Oct 9, 2009
I am having trouble with IF, ELSE and END IF statements. In Column H I am trying to copy over rows to sheets based on value according to ranges. I am trying to use the code below but everything seems to get copied in to the first sheet "0-500". d= worksheet name.
View 6 Replies
View Related
Nov 16, 2009
I have VBA code that copies over several sheets from a workbook, but I'd rather not have all the named ranges come through. Whenever I run the macro it gives me this notice: "A formula or sheet you want to move or copy contains the name 'rngRegion2', which already exists on the destination worksheet..." The destination sheet doesn't originally have this range already, it runs into problems because the sheets I'm copying have rngRegion2 defined on different sheets. I'd like to try and avoid this problem all together by not copying named ranges if possible.
If thats not a viable option, is there code that I can use to tell it to automatically select "Yes - To use the name as defined in the destination sheet" as opposed to prompting the user to select yes/no?
View 2 Replies
View Related
Aug 13, 2013
If I copy worksheet in Excel, the named ranges are copied too. If I copy in VBA, they are not. Is the only solution to loop thru the named ranges or is there something smarter like some "fullcopy"?
View 2 Replies
View Related
Dec 7, 2008
I want to be able to prompt a user to select a sheet to import to another file. The ranges are as follows.
Sub Importtimesheet()...
View 9 Replies
View Related
Aug 11, 2006
I have 2 ranges named MASTER and SUBSET and 1 range named ANSWER. I want to compare ranges MASTER and SUBSET and copy the difference to ANSWER. The ranges have the same number of columns but different number of rows. Sample data is below.
Ideally, I would like a VBA solution executed from a userform button.
Example:
MASTER
aaa apple
aab banana
aac grape
SUBSET
aab banana
ANSWER
aaa apple
aac grape
View 5 Replies
View Related
