Display Data From Sheets Based On Value In A Cell On Main Sheet?
Apr 29, 2014
I am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
I have a data sheet that I enter all data into. I would like to divide the data into different sheets depending on the month the job was entered. Please see a sample I have attached. I have tried to convert the month (colE) into a figure (colF). I am hoping the data automatically copies across into the correct month sheet or perhaps I can push a button and it will do it for me. Data will get entered on a daily basis by staff but only onto the main sheet, this will then by some miracle be duplicated into the corresponding sheet without loosing any data on the main sheet.
I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done
I have a detailed sheet called "detail"
I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"
The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.
I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy
I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that
What I want to do is take information from a main sheet and pull certain rows (determined based up on the selection made in the delivered to column) and move it to a worksheet that contains information only for that individual entity. Below is the list of headers in my lis of all information
Ticket #DateDelivered ToNet kg WtTonsRunningTotalDaily Total
As I said, depending upon the name in the delivered to, I would like to carry forward the following information only for the specified vendor. For example if we have 3 entries 1 delivered to company a, 1 to company b and 1 to company c, each would carry forward to the respective worksheet for that vendor.
Ticket #DateDelivered ToTons
how I might accomplish this in a usable format for what I am trying to do.
I have a workbook with several sheets of varying length (amount of columns). The length of each sheet changes every week. I want particular data from the sheets to come together on one sheet in as organized a fashion as is possible. I'm currently losing my mind copying and pasting every week when I need to update the thing.
Im trying to compile them all on the same sheet (Main Sheet). But each sheet is NOT the same. I need to choose what Columns needs to be copied (I can use one macro for each tab if needed)
For example I need Sheet1, Columns (A,C,E,G,S) copy that and then go to (Main Sheet) and paste in the next blank line (column A)
I need a Macro which pulls the data from different sheets of excel (which is not formatted properly) to Main Sheet. Also some of the columns will not have the same names, so macro should handle this exception as well.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I'm trying to create an auto fill setup where 12-15 work sheets all get their data from 1 main sheet where I will import sales numbers. On a monthly basis I create reviews for all sales personel and the inputting of data alone uses precious time. So I would like to import the sales data, seperate it by column, and have the data auto fill the sales associates fields automaticly. So if I import the data to sheet 1 and associate John Smiths sales data fall on cell A1 thru A20 and directly below him Jane Doe's sales data falls on cells B1 thru B20. John's review will auto fill from the data on A1-A20 and Jane will have an identical review on a different sheet that auto fills from the data in B1-B20.
In the main sheet C3 cell will be equal to c3:c15 serie and values in the v3:x15 serie will be greater than 0. Then formula calculate average of v3:x15 values based on c3 cell like vlookup. I'm writing formulas like that everytime and want it to get datas from all days of a month from 1 to 31. I tried '(1)31)' and when named sheets like 1,2,3 '1:31' i got #value error however when i write 31 if formulas for all days i got the correct results.
I have an attendance file w/least 30 sheets. 29 of the sheets are for each separate group. The other sheet is the main one where I need to collect information like "total participants in attendance" and "total members in group" Then I divide those two and get the percentage of attendance.
The sheets containing the individual groups info are set up like this... (1=they were in attendance)
GROUP 1 Name / January / February / March/ Jess________1________0________1 Ryan_______1________1________0 Joe ________1________0________0 ---------------------------------- total P ____3________1_________1 members___3________3_________3 % _______100_______33________33
I know I can manually go through and link the sums of participation and total group size into the main sheet, but I have a lot of workgroups and need to do this every month, is there an easier way? I am willing to change the set up of the sheets.
Attached is an example of what I'm trying to do. I've got a master sheet and four sheets, each for a different store. Each store carries the same five items with varying prices. I've set up the master to show the lowest price of each item and have the formula set to display the minimum price. I'd like column D to show the store from which the lowest price came. It can either show the sheet name or display cell A2, as that's the store name on all sheets.
I have a workbook that contains multiple sheets, currently five sheets of which only two of them are Info Datasheets.
I would like to create a VBA code that pulls data from multiple info datasheets and compiles that data into one Main Database sheet. However, after that initial collection, I need the code to maintain the rows data. Specifically, if any row's data changes in the info Datasheets I need that row on the main Database sheet to update.
The columns in the info datasheets range from A:AH, however I only need the columns A:E to be copied. And I would like the code to add column F in the main datasheet displaying the sheet name were the data was retrieved
Each Info sheet (Metals, Polymers) are setup identical; Rows 1:3 are the headers, and Column D and/or Column E will denote a change to the row.
The Main Database sheet (Table of Context) has 2 rows for the header. So, the data will start on row 3
I'm looking for a solution for my worksheet. I've got a main tab in which contains deposit data, I need to take the raw data format it and break it down into 7 different tabs. Each week a report is exported and then one for the actual month containing all the data. I’m currently manually recording some formatting macros because I haven’t learned to write my own yet. The number of columns in this report is always constant but the rows vary depending on the number of deposits. I have 7 tabs where the data from the main sheet will be broken down in. In my spread sheet I have the following headings. (A1)Date, (A2)Batch, (A3)Source (A4)Control (A5)Total Batch (A6)Total Variance
The information I would use to copy the rows to other sheets is going to be based on (A2).
Anything that starts with U65 would go into the U-65 tab. 1,7 or 8 would go to the lockbox tab. 2 or 5 = IN-HOUSE 3 = WIRES 4 = DATA OCEAN Eh, WH, or WE = ACH
Finally the variance tab will contain any rows which have a number other than 0 Positive or Negative. My biggest problem is that I never know how many rows the data will have so when I recorded my macro I Started dragging my formats to about row 200. It could one day surpass this number so If I had a choice id set it to row 1,000.
I get a report each day with a list of issues. the "group" that works the issue and the "priority". Based on these two factors, i need to do a double lookup (vlookup?) to another tab or file to match the priority and group and see what value should be brought back for each lines results. For example, if group1 had a prority3 issue, the lookup would find the value from the other sheet or file and bring back the value and put it at the end of the row where the formula is.
Attached are examples of the sheets. sheet1.jpg sheet2.PNG
spliting of main data By column criterias which start from column E1:L1 something like Pivot Table in new worksheet, but based on formula functions.Each worksheets have to based in one of this column D1:K1 headings. That also have to rapidly change with main data table.
My main data tab is collecting gallons pumped for a particular piece of equipment. I have a drop down box to populate the piece of equipment and VLookup to identify the unit number associated with the equipment. I would like to create a separate tab for each piece of equipment that will track the number of gallons pumped during the calendar year. Here is the format for the main tab:
DateBeginning Meter ReadEnding Meter Read GallonsEquipment IDEquipment Description
1/2/2014565443565625 18212006 ford f250 1/10/2014565625565675 5022006 Chevy 2500 1/11/2014565675565750 754Ford Taurus 1/12/2014565750565830 8012006 ford f250 1/13/2014565830565900 7012006 ford f250 1/14/2014565900566000 10012006 ford f250 1/15/2014566000566125 12512006 ford f250 1/16/2014566125566215 9012006 ford f250
The formula I used in Cell A4 is =INDEX(Gasoline!A4:A23,MATCH(1,Gasoline!F4:F19,FALSE),1)
Cells A4 and B4 have the correct values. My problem comes in A5,A6 and B5,B6. These should not have a result because they are different pieces of equipment. Throughout the year, each piece of equipment is going be used on the main tab. How do I keep the individual tabs from picking up the same entry multiple times.
I currently have 4 sheets in a workbook. They are... "Main", "Safety", "1 Week Response" and "Routine" I would like to enter data into the "Main" and have it automatically send that data to the corresponding sheet name. Example: On the "Main" sheet I enter in row 1 column "A" the number 520; column "B" I enter Safety. Then I want to push a macro button that sends this data to sheet "Safety" in the next available row.
I receive a workbook each day with approx 500 tabs of call data and I would like to relabel all the tabs with the user names. The user names are in a merged range "A7:M7". I'm having difficulty getting the following script to rename the sheets. Currently the values in "A7:M7" look like "User: ADAM ENGEMANN-558".
I am trying to delete each occurrence of "User: " while naming the sheets as well as removing the merged range before doing so that the names are in A7 only. The sheet names should look like "ADAM ENGEMANN-558", or, ideally just "ADAM ENGEMANN". For some reason my code will not modify the cells. (See attached example)
This works if I manually unmerge the cells before running and remove the ":".
VB: Sub RenameSheets2() Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets If ws.Range("A7").Value <> "" Then
[Code] .....
This his how I modified it but it doesn't work on the supplied sheets. Please note that if I manually insert some blank sheets into my workbook and merge the cells etc it does work. There seems to be something odd going on with the sheets they are giving me. (they aren't protected)
VB: Sub RenameSheets2() Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets If ws.Range("A7").Value <> "" Then
I tried adding the following to remove the merged ranges and remove 'User: ' from the names Range("A7:M7").Select With Selection .WrapText = False .MergeCells = False
I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG, Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this information in a message box.
I am having trouble getting the selection of sheets to work. I have a workbook that has multiple sheets and one constant sheet (Summary). There is code to create new forms in this workbook and insert them after the Summary sheet. These forms all have a date input that is formatted as a date (mm/dd/yyyy), these dates get modified on the day the form is created, there may be any number of sheets created during this process. I have to print the summary sheet and only the newest forms created. I need a code to select sheets to print based on the date input of a user for each form. This is what I have so far:
VB: Dim i As Variant i = Range("B5").Value >= InputBox("What date to start PDF from? Format = mm/dd/yyyy") Sheets(Array("i")).Select [code]....
If the dim can be taken out and just included in the line for the array that would be fine with me. The cell "B5" is where the date is located in each form. I want to input a date and the macro will select the sheets where the date is equal to and greater than the date entered. The Summary sheet will always be included in the print set. I have a dialog box for setting which printer to use - this file will be used at different offices and therefor the printers will be different and it will also allow to create a PDF if desired.
Currently I have it setup to copy rows to a sheet "Report" based on a single cell value. But now I need the same thing but have it copy the rows based on 2 cells values to sheet "Report". So for example I wanted to copy and paste each row in my workbook that contain values in Columns N:N that contain the value "Test" and in columns AB:AB that contain "1".
Sub copyagain() Application.ScreenUpdating = False Dim sh As Worksheet, findThis As String, fAdr As String, fLoc As Range findThis = "1"
I am trying to create a summary sheet from the matrix to do further analysis. I want to pick out the welds done everyday with weld inches as you will see in the summary sheet. How can summary sheet be automatically updated when I enter the inspection date rather than copying and pasting? I can use vlookup to get the weld dia once I get the weld numbers on that date. I have attached the file.
I need to display values from cells of sheet1 and sheet2 as comment in Corresponding cells of sheet3 whose value in sheet3 is FALSE
Sub try() Dim Sheet1cellval As String, Sheet2cellval As String Worksheets("Sheet3").Range("A1:D4").Select Dim cell As Range For Each cell In Selection If Worksheets("Sheet3").cell.Value = False Then cell.AddComment cell.Comment.Visible = False 'Getting the value of Cell in Sheet1 for the corresponding cell in Sheet3 whose value is FALSE Sheet1cellval= Worksheets("Sheet1").cell.value 'Getting the value of Cell in Sheet2 for the corresponding cell in Sheet3 whose value is FALSE Sheet2cellval = Worksheets("Sheet2").cell.value 'Displaying the values of cells in Sheet1 and 2 as comment for the corresponding cells in Sheet3 Worksheets("Sheet3").cell.Comment.Text Text:="Difference" & Chr(10) & Chr(10) & "Sheet1: " & Reportcellval & Chr(10) & Sheet2cellval & Chr(10) & ""
In my attached sheet.. I want the result from data sheet.. I have to enter the batch no and pallete no.. then all the data have to display in result sheet
