Displaying Colum Where Data Exists In A Different Worksheet.
Jun 4, 2006how do I automatically add beside the name the colum title where it previously existed. see the attached.
View 2 Replies
ADVERTISEMENT
Displaying Data Based On Selected Worksheet
Dec 21, 2006An integer in stored in Sheet1!A1. I want a formula in Sheet1!A2 to display data of sheetx!A3 where x is the number chosen in Sheet1!A1.
e.g. Sheet1!A1 store 3. Then Sheet1!A2 will display Sheet3!A3.
e.g. Sheet1!A1 store 7. Then Sheet1!A2 will display Sheet7!A3.
Find All Data In A Colum With Same Value
Apr 18, 2009I want to be able to find all data of same value under divcode (column A ) in worksheet1 and have it put into like columns in worksheet2. I would even settle for it selecting all the cells so i can copy and paste if i have to go that route.
Example below: find all data under divcode (column A ) that is equal to mpo and put.........
Number A Colum For Sorting As Data Base
Jun 11, 2008totaly new to Excel (just using two weeks) as a database
I need to number a colum, 1 to what ever, so that I can use that colum to re-sort the data base back into original order.
Determining If A Worksheet Exists
Jun 11, 2009I try to do the following I get an error 'Subscript out of range'
View 3 Replies View RelatedCheck If A Worksheet Exists
Mar 10, 2009i would like to know whether a worksheet exists or not... say, the worksheet name is sheet1, i need to check whether the worksheet exists... the point is, i need to delete the worksheet if it exists and execute a code... if the worksheet doesn't exist also, i need to execute the code... so im getting a little confused with this... i need something like this...
if sheet1_exists then
delete the sheet
end if
my_code.......
Delete Worksheet If It Exists
Mar 1, 2007Does anyone have SIMPLE code for this that can be run in a normal Sub. My worksheet will always be named "Cleaned". I have seen some posts regarding Functions and other things that seem more complicated than necessary.
View 9 Replies View RelatedCopy Rows To Worksheet IF Exists
Jun 17, 2009I have a spreadsheet with columns set up like this: RowName, Date, Value1, Value2, Value3 etc. The date is in format YYYYMMDD. What I am trying to do follows, in some sort of pseduo fashion.
View 2 Replies View RelatedDelete A Worksheet If Exists Or Present
Jul 27, 2009How do I delete a worksheet but ONLY if it exists, if it doesn't exist, ignore the command. I'm afraid to mess up the other code in the macro/sub, so here it is...
View 2 Replies View RelatedVBA To Check If Worksheet Exists In Workbook
Nov 8, 2011I have an array that opens a workbook containing close to 100 worksheets, and copies specific sheet names into there own individual workbooks. The problem I have now, is that I assume the worksheet exists in the workbook, but often times it does not Is there a way to add some sort of "catch" that will 1st verify the worksheet exists instead of my code crashing?
View 9 Replies View RelatedOpen Workbook Only If Worksheet Exists.
Jul 16, 2006I have a macro that 'opens all' workbooks in the specified folder. I've copied it over, but need to only open all the wbk's if a specified worksheet exists w/in the wbk..I know there is a dim ws statement that can be used, but how do i use it w/ the current macro?
Option Explicit
Sub recTestOpenAll()
Dim x As Integer
Dim WB As String
Dim wbk As Workbook
For x = 1 To 100
WB = "G:Rule Test FilesREC " & x & ".xls"
On Error Resume Next
Set wbk = Workbooks.Open(Filename:=WB)
On Error Goto 0
If Not wbk Is Nothing Then
End If
Next
End Sub
Conditional Check To See If A Worksheet Exists
Jul 3, 2007I am writing a macro which first needs to look and see if a certain worksheet exists. If it doesn't then I want it to create it but if it does I first want it to delete the sheet then create a blank one with the same name. At trhe moment I have this but it is scrappy and doesn't work very well:
On Error Goto AddSheet
If Sheets("MONEYSHEET").Activate Then Goto Data
AddSheet:
Sheets.Add before:=Sheets("LOOKUPSHEET")
ActiveSheet.Name = "MONEYSHEET"
Data:
It also does not delete the sheet if it already exists, just edits the existing one.
Check If Value Exists In Range For Worksheet Filtering
Nov 3, 2009I'm looking to use the value from a series of dropdowns (made via data validation lists).
Cell AM5 is a dropdown of named ranges made form a seperate sheet
Cell AO5 is a dropdown that uses '=INDIRECT(AM5) to lookup the values in the named range.
I need cell AO5's value to be used to filter rows in the current worksheet. The current problem is when i use the first dropdown in AM5 it still displays the last value, untill i use the dropdown to select a new one. This value typically will not be found and i do not want my code to execute in these cases.
Test/Check If Shape Exists On Worksheet
Aug 31, 2006I'm creating a macro to select, modify dimensions and place shapes on a excel sheet. (I'm talking about pictures insered and stocked in a specific sheet of my workbook)
When the users insert a new picture he has to set a name for each of them.
A combobox contain the choices, when an item is selected, the macro identify, size and place the corresponding picture.
But I have a bug if a shape doesn't exist when I try to select it :
Sheets("fiche de controle").Select
'select the sheet with the pictures
ActiveSheet.Shapes(Item_old).Select
'select the shapes "Item_Old"
Item_Old is a variable corresponding to the picture name.
If the user made a typo, I have a bug.
Someone knows how to test if the shapes exist to display a meesage if not ?
Or somethig to avoid this kind of bug ?
Delete Row If Value In Cell Exists In Another Worksheet Column
Oct 22, 2007I have working data on list sheet and added data on compiled sheet.
I need to match duplicates and delete these rows from compiled sheet.
I've tried coping to the list sheet and use "Remove Duplicates", but it rids me of the data that has been processed and has fills applied.
I'm looking for a macor that can do this work for me without losing data on list sheet.
This data reaches into the thousands and I'm looking to run this off the CASE column.
Displaying Different Worksheet Using The Timer
Jun 23, 2008I have three charts on different worksheets - what I want to do is to use a macro to display each chart for 30 seconds and switch to another worksheet and display the chart on that worksheet.
something like below:
ActiveSheet="Sheet1"
ActiveSheet="Sheet2"
ActiveSheet="Sheet3"
Application.OnTime Now + TimeSerial(0, 0, 30), "Procedure_name"
Displaying A Form Without Showing The Worksheet
May 27, 2009I have created a form that converts latitude / longitude from Decimal Degrees to Degrees Minutes Seconds decimal seconds. I want my coworkers to be able to use the form, but I don't want them to see the excel window/worksheet when they open it up.... I thought I had received an email once that appeared to be an excel file but when you opened it, it was just a form. I have tried all I can think of to no avail.
View 3 Replies View RelatedDisplaying System Information In New Worksheet
Nov 17, 2012For some reason I need to display quite a few computer's installed software from system information in to separate worksheet.How can I copy all installed programs and paste into new worksheet with a code?
View 1 Replies View RelatedTransfer Specific Data On Each Page To A Different Colum On That Same Page
Mar 15, 2007I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies View RelatedDisplaying Values In An Entire Column In Another Worksheet
Jun 26, 2008Is there a formula/function in excel that can take all the cells in a column, lets say Column A, and paste/display it in another file without the spaces between the cells with values and without duplicates?
Worksheet1
Column A
1 Name
2
3 Mike
4 Rob
5 Ryan
6
7 Mindy
8 Paul
9
10 Rob
11
12 Mindy
13 Chris
Worksheet2
Column A
1 Name
2 Mike
3 Rob
4 Ryan
5 Mindy
6 Paul
7 Chris
8
9
10
11
12
13
Dropdown List Displaying Multiple Results - No Functionality If Worksheet Is Protected
Nov 28, 2013I wanted to create a multiple drop down lists (using data validation) in column B (50 in all, every 3rd line) whereby, multiple, comma deliminated, results would display in each of the cells - for use elsewhere in the spreadsheet.
I found some code (as follows) which worked perfectly for me
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngDV As Range
Dim oldVal As String
[Code].....
As I mentioned above, I don't really understand the code and all I know is that the line about halfway down "If Target.Column = 2 Then" is defining which column (B) this will work in.
The problem I am having is that I need to protect the worksheet and the moment I "protect" the worksheet, the functionality of displaying multiple values goes away and the drop-down list reverts to only displaying one of the available values.
Copying Data To Another Sheet If Data Exists (using MACRO)
Jan 21, 2013I have a worksheet which contains certain sections. I want to create a macro which will run if data is input into those sections. This macro should copy whatever was entered into another worksheet automatically as data is being entered. Is there a way for that?
View 8 Replies View RelatedHow To Get Unique Value From Two Columns In A Third Colum
Dec 18, 2008I have two columns in excel A and B. Now I need to create third column based on unique values from these two columns.
View 9 Replies View RelatedAutofilling A Colum That Has Different #'s And Spaces
Oct 23, 2008I am currently trying to autofill a column or use a formula to try and autofill. I know how to do the dragging thing but that is too time consuming as I have about 30,000 rows and this needs to be done weekly. I know there's a way to do it but I forgot. Basically if you look at the first number below (ends in 0612), I want it to fill all the cells that are underneath it until it reaches the next number (which ends in 0856 below), then I want to fill all the blank cells(that end in 0856) with the 0856 number and continue down.
Is there maybe a formula that I can create in the column next to this and have it do it that way, or is there an option that will let me do this by highlighting the column.
Fill Down Only As Far As Data Exists
Jun 27, 2012I have the following within a macro:
Code:
ActiveCell.FormulaR1C1 = "=WEEKDAY(RC[-2],2)"
Range(Selection, Selection.End(xlDown)).Select
Selection.FillDown
Calculate
I want to add to it so that it only fills the formula down as far as there is data in the column to the immediate left. (eg this fills down column C as far as the data goes down in column B).
Determine What Row Data Currently Exists On?
Nov 7, 2012I have the following data set:
1
Test
2
Testing
3
Test 3
4
Test
Exists on line 1
5
Test 5
6
Test 6
7
Testing
Exists on line 2
So basically I'd like to know if there is a duplicate line item what line item the duplicate actually exists on. Is there an easy way to do this with a formula?
Run Macro Unless Data Exists?
Mar 10, 2007Right now, when selecting "Sheet2", this macro auto runs, and does it's thing. Is there a way to code it so that upon selecting sheet2, if data exists in the cells, make the macro go to the end of the list? For instance, this macro is great the first time someone goes to sheet2, but if they begin putting data in, and need to go back to sheet1 to reference something, then come back into sheet2, this macro runs again and moves the focus to the cell I coded. I need it to realize that there is now info in the cells, and move not to the selected cell, but to the end of the newly entered data.
Sub Macro3()
FinalRow = Cells(65536, 1).End(xlUp).Row
If Range("Manual").Value = True Then
Sheets("Usage").Activate
ActiveWindow.SmallScroll Down:=48
Range("A11").Select
Else 'assume Manual is false if it is not true above
Sheets("Usage").Activate
ActiveWindow.SmallScroll Down:=49
Range("A59").Select
End If
End Sub
Get The Status Colum To Update Automatically
Oct 10, 2008I have a spreadsheet reports on tasks that is updated daily.
At the end of the columns is a due date column and a status colour column where 4 options are possible:
Red = out of target, yellow = on target, brown = still on target but at risk, and green = on target.
I have been asked to see if there is some way of making the status colour column automated so that as task pass their due date and are not complete or are complete, the status field changes automatically.
I have added the feature in =today() in cell A1 and another column next to due date date completed. I think these will help but not sure how to get the status colum to update automatically. I've tried using the IF function but that only returns text...
NOT Displaying Items With No Data When Filtering Data In Pivot Table?
Aug 19, 2012is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
Lookfunction (type In A Referance So It Will Give Me The Value In The Same Colum In The Row Below)
Nov 19, 2008i would like a look up function that I can type in a referance so it will give me the value in the same colum in the row below.
so if the referance was sample 2 it would give me sample 3
sample1
sample2
sample3
sample4
sample5
sample6