For some reason I need to display quite a few computer's installed software from system information in to separate worksheet.How can I copy all installed programs and paste into new worksheet with a code?
View 1 RepliesThere are many software solutions for clinical information systems, but they all cost a lot. It occurred to me that a bespoke system could be build using excel.
View 1 Replies View Relatedcheck the table in the attachment.
I only want the top row / filters (A1 - H1) to be displayed on Table 1 but keep the functionality of it.
Is it somehow possible to hide all the information below A1-H1 or put it on another table and let Table 1 refer to it?
The table is mostly in German but it shouldn't matter.
I have a project I'm working on that requires me to display information from various sheets on a dashboard. I have created a data validation dropdown list with part numbers. When one of these part numbers is selected from the drop down list I need the rest of the fields to populate with the appropriate information from various sheets in the workbook. How do I tell the dashboard to display this information per part number?
see the attached workbook.
Mini-Project Wally Mart (B212-10).xls
I am creating a login system for two users on a excel worksheet. I have the two users on a drop-down list, Maria and Andrew, which then requires a password entry. This is linked onto a data validation to make sure that the password matches the data table.
After, I then click on a macro, which, when successful, takes me from sheet 1 to sheet 2.
My problem is that I need to have it so that Maria is taken from Sheet 1 to Sheet 2, and Andrew from Sheet 1 to Sheet 3.
I am thinking of commanding macro to select worksheet tab based on the system date to do some pasting.
My worksheet tab is as follow:
Nov-12, Dec-12, Jan-13, Feb-13 and .........
What should be the macro script required to select the worksheet tab based on today's date?
I have three charts on different worksheets - what I want to do is to use a macro to display each chart for 30 seconds and switch to another worksheet and display the chart on that worksheet.
something like below:
ActiveSheet="Sheet1"
ActiveSheet="Sheet2"
ActiveSheet="Sheet3"
Application.OnTime Now + TimeSerial(0, 0, 30), "Procedure_name"
I have created a form that converts latitude / longitude from Decimal Degrees to Degrees Minutes Seconds decimal seconds. I want my coworkers to be able to use the form, but I don't want them to see the excel window/worksheet when they open it up.... I thought I had received an email once that appeared to be an excel file but when you opened it, it was just a form. I have tried all I can think of to no avail.
View 3 Replies View RelatedAn integer in stored in Sheet1!A1. I want a formula in Sheet1!A2 to display data of sheetx!A3 where x is the number chosen in Sheet1!A1.
e.g. Sheet1!A1 store 3. Then Sheet1!A2 will display Sheet3!A3.
e.g. Sheet1!A1 store 7. Then Sheet1!A2 will display Sheet7!A3.
Is there a formula/function in excel that can take all the cells in a column, lets say Column A, and paste/display it in another file without the spaces between the cells with values and without duplicates?
Worksheet1
Column A
1 Name
2
3 Mike
4 Rob
5 Ryan
6
7 Mindy
8 Paul
9
10 Rob
11
12 Mindy
13 Chris
Worksheet2
Column A
1 Name
2 Mike
3 Rob
4 Ryan
5 Mindy
6 Paul
7 Chris
8
9
10
11
12
13
how do I automatically add beside the name the colum title where it previously existed. see the attached.
View 2 Replies View RelatedI wanted to create a multiple drop down lists (using data validation) in column B (50 in all, every 3rd line) whereby, multiple, comma deliminated, results would display in each of the cells - for use elsewhere in the spreadsheet.
I found some code (as follows) which worked perfectly for me
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rngDV As Range
Dim oldVal As String
[Code].....
As I mentioned above, I don't really understand the code and all I know is that the line about halfway down "If Target.Column = 2 Then" is defining which column (B) this will work in.
The problem I am having is that I need to protect the worksheet and the moment I "protect" the worksheet, the functionality of displaying multiple values goes away and the drop-down list reverts to only displaying one of the available values.
I'm trying to automate some documents we use on a regular basis so that we don't have to re-enter the same information over and over again. Basically I can get some cells to work and some will not. My first sheet is a contract. So I want Customer and Contractor info to show up on the rest of the sheets. I'm assuming something is messed up in the formatting of the cells but I can't figure out what.
So on my Job Book Cover Sheet I first want the GC's name and the code =Contract!G8 works perfectly. In the cell just under this one I want the Customers Name, but =Contract!C8:D8 (the cells on the contract with the Customers Name) returns #VALUE!
That said, the code =Contract!C8:D8 on my project detailer sheet returns the customer name like I want it to.
I am trying to create a simple ticketing system, just using the excel with no other PL.
I am trying to transfer the other in formation that I have create from 1 worksheet to another. If I input a particular number that I assigned I want that the other info along side with that number will automatically transfer to another worksheet.
This is a simple question but I just cant get the right format. I have a userform which saves info entered into the form into a worksheet. I have one cell in anoth worksheet (sheet2) which I would like include in the info from the form.
I already have the column entered in the database I am now trying to figure out how to include this in the save.
I would need to identify this cell in my VBA.
DIM "cell" as ?
If column F, G, H says PAP then I want it to return information from column A, B, C, D, E respectively into another worksheet. I have attached a sample
View 6 Replies View RelatedI'm trying to find the coding to be able to do the following.
If Manufacture = Dimond in Cell C3 then in C5 show list from database Worksheet, of A4-A9, if C3= Steel & Tube then show list for A13-A18
Cell C3 is a Data Validation List
I keep getting name errors etc.
I want to create a macro that will take information from one worksheet to another. The problem is that the first worksheet has an autofilter and i do not know how copy information only from the cells that were filtered with the correct information without copying it manually.
View 3 Replies View RelatedI want to setup an excel spreadsheet that will list employees and when exams were completed on them. The exams need to be completed once a year. I want the excel spreadsheet to send out an email to their corresponding supervisors when is within one month or so of an exam needing to be completed so their exam can be scheduled accordingly.
I have searched this forum and read through some of the other posts regarding exporting data from excel to outlook. This seems like what I need to do but I wanted to see if anyone has an advice on what way is better than the other?
Also, if excel is setup to push the data to outlook, does the excel file need to be open? In other words if Jimmy comes within one month of his exam but no one opens the excel file will it send out the email to outlook?
Is it a better option/ or possibility to have Outlook pull/check to see if the condition exists where an employee is within a month of his exam and then let the supervisor know?
I'm using a v-lookup to pull information from one worksheet to another. I know that each of the cells has a match on the second sheet, but the calcuation is resulting in a Value Not Available error. The only way I've figured out to get past the error is to go into each cell, hit F2 and then enter.
View 2 Replies View RelatedI'm trying to fish information from one worksheet to another.... Here's my sub, what's my SUBcranial problem?
Private Sub bt_PopulatePage_Click()
' Inventory Data Transfer to Report Structured Page
Sheets("Liquor Data").Select 'Switch to Liquor Data Sheet
Dim x 'Line Numbers x = Liquor Data Line
For x = 2 To Last_Row("B") 'Start at the first Liquor Entry Line
Sheets("Liquor Data").Select
t_liq = Cells(x, 2) ' Liquor Name in Starting in B,2
t_Class = Cells(x, 4) ' Class starting in B,4
t_type = Cells(x, 5) ' Type Starting in B,5
t_dist = Cells(x, 8) ' Distributor Starting in B,8
Sheets("Inventory Form").Select 'Select Inventory Page
Cells(x + 7, 1) = t_liq
Cells(x + 7, 2) = t_Class
Cells(x + 7, 3) = t_type
Cells(x + 7, 4) = t_dist
Next x
End Sub
In one worksheet there is a code for every customer and their details e.g. Name, medication they are on, what they are alergic to etc then in another new worksheet can we just type in that code and their individual information comes up automatically?
View 4 Replies View RelatedI am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
View 6 Replies View Relatedwhen I reference the information in worksheet 1 with worksheet 2, and I have no info in worksheet 1, I get zeros in worksheet 2. is there a way to have the cell show up empty until there is information worksheet 1?
View 9 Replies View Relatedhow to reference cells in 1 page from another and understand basic formula's, and would appreciate any input on how or if i can acheive what i'm trying to accomplish.
I have a worksheet with say 100 rows of information, it is a list of materials to go into a construction job. the columns to the right of the description calculate volume/quantity etc and produce a cost for the item. what i want to do is have a summary page that only lists the items that are being used, not all 100 items are in every job and i dont want to have to print the whole list with a bunch of empty values, which will just waste paper and ink. I'd like to enter a value in a cell or setup a check box or something that i could somehow use to then list that row or a part of that row of information on a seperate sheet, for a nice concise, easy to read list of job materials. i would like to do produce 1 sheet with the cost associated with the item, and one without cost.
I am working on a project that I feel should be relatively simple but I seem to be stuck. My Goal: To add information to specific rows of data in the worksheet. I want to use a user form, and eliminate as much typing for the user as possible. I have already designed my user form, and written the code to identify the row in which I want to edit. Nonetheless, I do not know how to code the insertion of the new data. The data I want to add will be in empty cells at the end(right) of the data table.
I have attached a portion of my data set.InsertQuote.jpg
Here is where I am. The words in red are just colloquial words that I cannot seem to put into code.
Private Sub CmdInsert_Click()
Dim Company As String
Dim PartNumber As Variant
Dim Condition As String
[Code] .....
I have code that i use to copy a worksheet of information in one workbook to a worksheet in another workbook. All i need is some guidance on how to copy a second worksheet from workbook 1 to a second worksheet in workbook 2. Should be fairl straight forward.
In the below i am copying the sheet Phone_data to a second work book sheet also called Phone_Data, i would like to include in the same proccess a sheet called Sur_Data from workbook 1 copy to a sheet called Sur_Data_R in the second. All the other features like find next empty row also apply.
Is It Possible to use VBA Coding to Display An Image (Object),
And Un-Display or Remove that Same Image (Object) using a VBA Code?
Example:
I have a Mailbox Picture that I would Like to Show, but only when a cell's
value = 5. If the Cell's Value is not 5, then don't display the mailbox.
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
Basically I am trying to create a worksheet in which everytime I input information into Sheet 1, it is copied into Sheet 2. I want to have each entry in succession on Sheet 2 such that my first entry would be on Row 2, second on Row 3, third on Row 4, etc. However, everytime I put something new in Sheet 1, it just overrides the information in Sheet 2.
Basically I type in ticket sales in sheet 1, it calculates the prices and keeps a transaction log in sheet 2. But everytime I do a new ticket sale, it just overwrites the previous transaction witht he new transaction information. I've pasted my VBA below:
Sheet 1 VBA:
Code:
Option Explicit
'Form level variables - used in more than one event
Dim intAdult As Integer
Dim intStudentSenior As Integer
Dim intBalcony As Integer
Dim intChild As Integer
Dim sngAmountDue As Single
[Code] .......
Sheet 2 code:
Private Sub cmdSummary_Click()
'Declare Variables
Dim intCount As Integer
Dim i As Integer
Dim intAdult As Integer
Dim intStudentSenior As Integer
[Code] ......