Autofilling A Colum That Has Different #'s And Spaces
Oct 23, 2008
I am currently trying to autofill a column or use a formula to try and autofill. I know how to do the dragging thing but that is too time consuming as I have about 30,000 rows and this needs to be done weekly. I know there's a way to do it but I forgot. Basically if you look at the first number below (ends in 0612), I want it to fill all the cells that are underneath it until it reaches the next number (which ends in 0856 below), then I want to fill all the blank cells(that end in 0856) with the 0856 number and continue down.
Is there maybe a formula that I can create in the column next to this and have it do it that way, or is there an option that will let me do this by highlighting the column.
Is it possible to autofill the blank rows with the row that has a value above them, have it skip the next row with a value, recognize the next blank cells and fill them in with the previously skipped row, and so on down the line? How might I go about doing that?
I'm trying to create a code that autofills the next empty row in colum A with a number. What I have at the moment is:
'Create Index in Transaction list x = Range("A" & Rows.Count).End(xlUp).Value Sheets("Transaction list").Range("A" & Rows.Count).End(xlUp).Offset(1, 0) = x + 1
If I run this code in isolation from the rest of my code (which is copying and pasting values from one sheet to another) it works, but when I run the full code it only autofills the rows with "1".
I am still new to this, and I pulled this code off of another site.
Background: - Using Excel VBA, 2007 - I have a sheet that has a name in B6, has 4 blank spaces beneath, and then another name, 4 blank spaces, etc. - I wrote a code to fill each of these 4 blank spaces with the value at the top of each - The code works, but it won't fill the 4 spaces at the bottom of the column.
What is needed: -how I can adjust to code below to fill in the 4 spaces beneath the last value in the column?
Code:
Sub FillBlanks() Dim rRange1 As Range, rRange2 As Range Dim iReply As Integer
I want to be able to find all data of same value under divcode (column A ) in worksheet1 and have it put into like columns in worksheet2. I would even settle for it selecting all the cells so i can copy and paste if i have to go that route. Example below: find all data under divcode (column A ) that is equal to mpo and put.........
I have a spreadsheet reports on tasks that is updated daily. At the end of the columns is a due date column and a status colour column where 4 options are possible: Red = out of target, yellow = on target, brown = still on target but at risk, and green = on target.
I have been asked to see if there is some way of making the status colour column automated so that as task pass their due date and are not complete or are complete, the status field changes automatically.
I have added the feature in =today() in cell A1 and another column next to due date date completed. I think these will help but not sure how to get the status colum to update automatically. I've tried using the IF function but that only returns text...
i would like a look up function that I can type in a referance so it will give me the value in the same colum in the row below. so if the referance was sample 2 it would give me sample 3
I would like to have something that looks like a running total, but isn't.
I have in a colomn 'rate' and after that a column for each month in a year. I would like to have at the bottom a total cost, so rate x hours. have a look at the picture.
is there a formula for this? ratemayjunejuli $10 2,02,01,0 $12 2,03,00,0 $10 3,02,05,0 $15 4,02,53,0
way to put a simple formula in a colum that will apply to the entire column, no matter how many rows without having to physically copy it to the number of rows required?
I was created an annual leave planner and I would like the box in Colum A to reduce the number of days they have left every time they book leave. I would like it to start off as 25 days leave including UK bank holidays.
I am using Excel 2008 for Mac. I have a spreadsheet that I am essentially using as a simple cheque ledger so that I can keep track of who I have written cheques to, for what amount, and what has already cleared. I have a the following columns:
Name Date Written Cheque Amount Cleared?
In the 'Cleared?' column I mark an X when it has cleared the bank. I'm trying to find a way to get the SUM of the whole 'Cheque Amount' column that hasn't cleared (ie: has nothing in the 'cleared' column).
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from below attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5.
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I have a list in Column A" Job List" (the amount of entries will change based on job openings). There are some cells that are blank; randomly throughout. I need to create a new Column B "Current Jobs List" with no spaces. I have to do this weekly and each time I update my "Current Jobs List" from the new data in the "Job List" without any spaces.(I do not want to just do a filter) .
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
I have this worksheet. What I have here is one activity ID with multiple information on BOQ and its related data. What I would like to have is just Columns A-J and move the required information in columns K-AS to H-J. The result of this will give me multiple rows of the same ACTID and one BOQ NO for each row....
I am creating a small function that should create a new login for future users. The login is 7 characters long. Spaces in that name (in cell A1 eg) should be removed? But how do I do this?
How do I remove the space in the name: "De Castro Imelda". Apparently the function TRIM does not help me much. Either I use the wrong function, or I my syntax is not good...
I have a range of cells in column A... it's called SPACE. The code should be if the value in each cell is equal to "1" and select the NEXT row and INSERT an empty space.
Then keep going down the range to find the next "1", and add a space... but if it's not equal to one, keep going. Essentially I'm grouping data, with new data sets being indicated by the "1", and need to put an empty row in between the data sets.
I have a cel that has about 100,000 phone numbers and at the end of some and before sum, there are spaces added to end. is there a formula, or a way to take everything away except for the 10 digit number?
I have an instance where I have a list of numbers in different rows with different amounts and I want to add up the last 6 numbers, they're all in the same column however they're not all in consecutive rows.
Also, the gaps between the rows is not consistent.
The example below explains what I mean (I've add numbers in between so you can see the varying gaps, but they're actually blank cells)
I am trying to remove spaces in front of a number (currently formatted as text)
I have tried "Text to Columns", "Trim", and other suggestions in previously threads.
I have copied bank statement amounts from an e-mail and the $ amounts have one Space in front of them. When I use the Trim function, and then a paste special, I still cannot get rid of the space, and so cannot add up the amounts in this column.
Ex:
*7 Dec 2007*DEPOSIT*3,917.63 *7 Dec 2007*DEPOSIT*1,890.58
I've got a problem with a report that we need to manipulate in Excel. the report details the man hours each of our analysts has spent on calls and reports in the following format HH:MM:SS. However, the report comes out with a space after 'SS', so I need to trim this in order for excel to calculate total and average fix times. Cells are formatted to custom [H]:MM:SS.
With over 200 records requiring trimming per report, is there a formula that I can apply to this? I have tried =trim("Cell number") but this doesn't work.
I have columns that are defined with these width's: A - 9B - 1C - 12D - 12
I need a macro that would add spaces to the right of the cell if the cell does not have number of characters of the lenght of the column width.
For instance: Cell A1 has 5 characters so it would need 4 spaces. Cell A2 has 7 characters so it would need 2 spaces. Cell B1 has 1 character so it would NOT need a space. Cell B2 has 0 characters so it would need 1 space.
