I have a data in excel sheet in Table format, in the first column i have added a unique Prod_ID. In form there is a search text box by entering the Prod ID & click of search button i need to display the respective row along with the Headers.
View 1 RepliesI have created a form that converts latitude / longitude from Decimal Degrees to Degrees Minutes Seconds decimal seconds. I want my coworkers to be able to use the form, but I don't want them to see the excel window/worksheet when they open it up.... I thought I had received an email once that appeared to be an excel file but when you opened it, it was just a form. I have tried all I can think of to no avail.
View 3 Replies View Relatedi want to do the following: initialize a sheet by showing form1, which accepts user input for rows and cols name a range on the sheet of size rows x cols display form2 which is just a "DONE" button that they click when they're finished pause/stop the macros and allow the user to fill in values for that range start up some other macros when they press the "DONE" button.
i tried it and found that when you display a form it locks the sheet (can't select the sheet to input values) and you can't even alt tab away from the form. is there a way around this?
check the table in the attachment.
I only want the top row / filters (A1 - H1) to be displayed on Table 1 but keep the functionality of it.
Is it somehow possible to hide all the information below A1-H1 or put it on another table and let Table 1 refer to it?
The table is mostly in German but it shouldn't matter.
I'm attaching a worksheet I'm having trouble with. Each entry has a total number of LINES (input by hand), a total amount of TIME (calculated by formula), a total number of CAPTIONS (input by hand), and a total amount of TIME2 (calculated by formula). I created a pivot table so I could see these four values by date, and also so I could see totals when I filter by other criteria such show names. But in the pivot table all the values come up as one-digit numbers. In the worksheet the LINES and CAPTIONS are usually 3-digit numbers, and the TIME and TIME2 are set up to display in H:MM format, but in the pivot table they don't appear that way at all.
The other option is to just use the filters in the table on the worksheet, but when I filter anything out the grand totals at the end of the table do not adjust, they continue to show the overall grand totals. Perhaps if I could get these totals to adjust whenever I use the filters, then I wouldn't need a pivot table.
For a soccer league table I'm building, I'm trying to add a few columns that display each team's form in the last few matches. So, it will state 'W', 'D' or 'L' for a certain number of recent matches. Like this for each team in the league table: WWDLW.
In the attachment example, I've pretty much got the concept working, having used the invaluable INDEX/MATCH/LARGE functions and a serial date column. The problem is, at the moment the DDW you see at the bottom is taking the whole table into consideration. I'm trying to get it so only Arsenal's recent results are taken into account. I feel like this shouldn't be too difficult, but after numerous attempts of using different functions I cannot get it to work.
Book1.xlsx
I am looking to find the best method of pulling data from a Lookup Table I would like to set up a drop down with all the relevant Steel Sections we make it work and have it access the information and display just that information a separate face page. The information I have set up on the lookup and have named ranges fro them all But how do I get the drop down to trigger the process.
View 3 Replies View RelatedI am new to Pivot Tables and I am having difficulty displaying a count of data in a column with Y/N answers.
Previously I would have undertaken this using the SumProduct function in a standard table.
I attach an example workbook with my data, what I want it to look like and the pivot I have created.
Book1.xlsx‎
On my data tab I've got a column for "review date." Some of those cells are blank. When you go to the pivot table, the respective cell for that blank.review date cell displays the date 1/29/14. There is no data in the cell on the data tab, so why would it be displaying 1/29/14? I want it to either say "blank" or just be blank. It does this for every review date cell that is blank.
View 3 Replies View RelatedHave one data table with 200+ codes
The data table looks like this
code # bit mfg bit type
2001 HTC E5001FG
Main worksheet
In the main table (see image) I want to look up the code# biased on the information in columns e & f and place the code# in column d
is there any way to NOT Displaying Items with No Data when filtering data in my pivot table?
For instance, I have 2 report filters: Category and Subcategory, when I select a category in the first filter I want to see only the options of subcategories with data in the second filter, I mean display only the subcategories of the Category previously filter.
Same scenario I have with a report with Directors and Organizations, when I filter one Director it would be nice to see only the organizations of this director and not all options on the data.
As per the example, I have a spread sheet comprising 4 pairs of columns headed Option and Grade (numbered 1 to 4). Col A is the Name of a person, cols B to I contain option (subject name) and grade data. Not every option and grade pair is used and the distribution is random.
In each used pair the grade is always one cell to the right of the subject. For each person name, I want to extract all of the grade data and place it into a separate table having separate columns for each subject i.e. who got which grade for the range of subjects.
By using the lookup function, I am able to identify where the subject and grade pairs are for each row. I have been unable then to move one cell to the right to extract the grade letter. I have thought of combining OFFSET with LOOKUP but can’t make it work.
I just discovered forms in excel and loving what custom functionality you can create with it; however, I need to include a table into the form but I've come to a road block. I don't see a way possible to render data from a query into a table inside of a form.
PS - I'm using Excel 2013
I created a table in excel, using it's Table feature, the first column has A - J, the second column has 1 - 10,
I then created a VBA form in VBA6,
How do i display that table and its 2 columns in a VBA form?
I have got a table, with a range B1:CC200. I have been able to run a macro which pops up a form and shows the particulars of a selected month corresponding to those in the table. (e.g., say entries in column D pertaining to say, March 2012 are shown in the form). Problem is I want to be able to update the entries using the form, but no no success. Am quite new to vba but the code I tried to use on the command button after updating is shown below
Private Sub CommandButton1_Click()
TextBox1.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B2:CC2"))
TextBox2.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B3:CC3"))
.
.
.
TextBox20.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B20:CC20"))
Unload Me
End Sub
Where A1 is the month in question, B1:CC200 the range of the database and row B2:CC2, and B3:CC3...., B20:CC20the data I need to update. .
Is it possible to show a table in a user form? For example I have a table that is 4 columns wide and 5 rows deep with lines seperating both. I have tried using a text box and list box to achieve the results I am looking for but can't figure out how to add lines to seperate data between rows and columns.
View 5 Replies View RelatedIs it possible to set the input Range of a dropdown control to be a column from a table?
View 2 Replies View RelatedI'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE"
I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
Is It Possible to use VBA Coding to Display An Image (Object),
And Un-Display or Remove that Same Image (Object) using a VBA Code?
Example:
I have a Mailbox Picture that I would Like to Show, but only when a cell's
value = 5. If the Cell's Value is not 5, then don't display the mailbox.
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
View 2 Replies View RelatedI'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
View 3 Replies View RelatedI am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS
Sub RecallQuote()
'
' RecallQuote Macro
'
Sheets("Form").Select
Range("C2").Select 'this is the cell that holds the quote number to look up from the table
[Code] ......
I have a spreadsheet I use to keep track of weekly sales patterns and use for estimating the amount of a product I would need to order taking into account what I would expect to sell in a given week and what stock I have at present. On the example I've attached, I show where I enter my storeroom count figures, which are organised by supplier and the position in which a particular product appears on the supplier's order form. I have a page which lists the orders by suppliers and which are used to place the orders by e-mail or telephone.
At present I have each supplier section of the order form directly linked to a cell on the storeroom count as per columns K to M on the attached file. However, this means that as products are de-listed by suppliers and extra products become available, I have to edit the formula in each cell as the products now appear in a different position on the storeroom count and may otherwise end up on the order form for a different supplier. I would like to set it up so that I just have to select the supplier name and the table below will automatically fill with the required info, in order of the position they appear on the supplier's form. I'm struggling to combine vlookup and hlookup. Is there a way to do it or do I need to rethink?
I'm trying to pull up a second form from a command button within a form. There's a command button in a sheet to open the first form (frmOrderInput.) Then there's another command button in that form to open the second form (frmPriceInput.)
The Module to open the first is this:
I have got a userform that fits my 24inch monitor screen perfectly, however it doesn't fit other screens. How do I get windows style scrollbars added to the form so people can use these to see the whole form?
View 3 Replies View Relatedfind the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have two forms...clicking a specific button on the first form should display the second form which works fine.
VB:
Private Sub Image_Employees_Click()
Form_Main.Hide
Form_Employees.Show
[Code].....
When I do this twice, however, the second form seems to freeze/hang and I have to close Excel and then re-open it. I feel like I'm overlooking something obvious...
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
I have created a form that pops up using a macro when the form is opened. It is a simple form that uses optionbuttons in a group to select Intl or Dom.
Problems:
1) How do you get the form to close once a button is selected?
2) The user can close the form without selecting a button (the X at the top).
3) How do you get the data selected onto the excel spreadsheet?