Excel Form To View And Update Table Using Lookup In VBA
Apr 18, 2012
I have got a table, with a range B1:CC200. I have been able to run a macro which pops up a form and shows the particulars of a selected month corresponding to those in the table. (e.g., say entries in column D pertaining to say, March 2012 are shown in the form). Problem is I want to be able to update the entries using the form, but no no success. Am quite new to vba but the code I tried to use on the command button after updating is shown below
Private Sub CommandButton1_Click()
TextBox1.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B2:CC2"))
TextBox2.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B3:CC3"))
.
.
.
TextBox20.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B20:CC20"))
Unload Me
End Sub
Where A1 is the month in question, B1:CC200 the range of the database and row B2:CC2, and B3:CC3...., B20:CC20the data I need to update. .
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100. I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
Is it possible to configure the workbook so the user can view the data in the worksheet from the form and I can hide the actual worksheet so that the data in the workshhet cannot be changed? Or maybe there is a better way all together??
I am attaching a copy of the worksheet.
Second, Is there a better way to input a code that would allow a search for duplicates in certain fields to be flagged (other than the color coding?)
I’ve created a form, from which I want to search and replace information into several sheets. Ex: When I select the button ‘find record’ after entering a name, I want it to search through consecutive sheets to find the name and populate all information associated with that name into the form. From there, I would like to be able to edit that particular record’s information in my form and then select another button on my form ‘update record’ to have the information automatically replaced back into wherever it finds that record’s name in the sheets.
I just discovered forms in excel and loving what custom functionality you can create with it; however, I need to include a table into the form but I've come to a road block. I don't see a way possible to render data from a query into a table inside of a form.
I am using Excel 2007 and my version of visual basic is 6.5.
I am baffled by the behavior of this code to manipulate one of my pivot tables. I am trying to set all but one of the pivot items in one of the pivot fields to not visible. Because there is a large number of items, I wish to suspend all automatic updates until all items are properly set to visible or non visible.
------------------------------------------------------ Sub SwitchBoards() Dim BoardNew As String Sheets("Board Parameters").Select ' Make sure we get the right value.
[Code].....
The MsgBox returns with: "Manual update is set to False" right after the instruction to set it to True!!
I have a quantity - thick/dia - width - length fields used as row labels, I would like each cell to have a border, after each update I get negative results to preserve the cell border formatting. Col b,c,d,e continually lose their cell border formatting after updating the data.
PIVOT TABLE FORMAT PRESERVATION DURING UPDATE 12-30-13.xlsx‎
I'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
Excel 2007 - need to adjust protected view settings but the protected view tab is missing from my Trust Centre settings - have the following tabs - trusted publisher / location, add-ins, activeX, macro, message bar, external content and privacy options. Document is a revenue authority download and without being able to adjust the protected view settings, can't input data.
I'm Using Excel 2007 and would like to have some VBA to work with the following!
I have a simple pivot table (PivotTable1) in Sheet1 with three items in the Report Filter which has been named "ROUTE" I have created a ComboBox in Sheet2 and have added the identical three items in via format control, cell link A1.
I would like to be able to use the combobox in sheet2 to operate the PivotTable Report Filter in Sheet1 as I would like to build a report whereas a user. Can only select the comboBox and does not see the pivotTable
Sounds simple but cannot get this to work no matter what I try.
I have spreadsheet that I use to display quarterly metrics. Within the workbook, there are two spreadsheets; (1) output (2) data.
Part 1: I want the ability to view data for any quarter of any year. In columns O-P, I have created a dropdown for the year I want to view and option buttons for the quarter I want to view.
The data is organized in one sheet and includes all information by quarter.
As an example, say I want to display data for District 112 and I want to display data for the 3rd Quarter of 2007. I am trying to create a formula that would look in the table as follows: (1) look for district 112 then (2) look for 2007 then (3) look for 3rd quarter then (4) look for units sold. I tried using a modified lookup function but didn’t have any luck.
Part 2: The second part of my question is similar to the first part but in this case I need to summarize data (cells $B$18:$D:$22).
As an example, say I want to display the total number of sales in the U.S. for the 3rd quarter of 2007. In this example, I would look in the table for the following: (1) look for Division then (2) look for 2007 then (3) look for 3rd quarter then (4) sum all based on criteria.
I need to return a value dependent on a few criteria. Type will be selected via a drop down and then it must lookup the same type in the top row and then the value which will be between two values and then return the grade on the far left.
I have this data table where the totals are in the last(bottom) row.The number of rows of the table increases as new records are added to the bottom of the table. Now, the problem is , I need to have the Row that contains the Totals alwas on view no matter how big the table gets and no matter how far down/up the workshhet is scrolled.
I have tried Freeze Panes/Spliting adding new window , live shapes etc but all look dodgy and bring their own set of problems.
I have also thought about putting the Totals of the table in a row at the top of the worksheet and freezing the panes at that location but having the Totals showing at the bottom of the Table is the normal intuitive way .
I have a list of names (300 now but growing every month by 100-200). In the row with the name contains data I need to view: date, $, #, etc...
I want to quickly see whos name appears the most, 2nd most, 3rd most, etc.....(at the end of the year I will have 2000+ names, most names will only be listed 1x, I suspect nobodies name will be listed more than 60x.)
I also need the ability to view the relative data of the person's name that is listed most, 2nd most, etc....
is it possible to select the data to view by running a macro. my table is based on dates. i would like to see all data before the date i run the table and 6 weeks in front only.
I'm currently working on a form to fill out in a study on different analyzers; the master form has gone through several revisions. To keep things looking neat, all the "children" forms have had to be altered, too. The amount of data is getting large and having to do this is getting annoying.
Is there a way to create a master form that is modifyable where the changes are spread through the children? i.e. if I insert a row with new information, I'd like the change to occur on multiple sheets. If I move a row to a different spot, similarly, I'd want all my forms with data to move around to follow suit.
In the attached example I can't add more than one name at a time without closing the user form. I can edit the list and click the "Save Changes" button and the changes happen. But using the "Add Name" button I can not add more than one name without closing the form, it just overwrites the previous name unless I close the form.
I am trying to perform a lookup (vlookup) function in a cell in excel and wish to have the range as a variable, so that I can adjust which column the lookup function refers to.
I have 3 Excel files open. There's one unnamed file that I can open in the background with no problem. Then I have 2 data files. I'd like to be able to view them both at the same time, side by side, but for some reason I cant. They both seem to occupy the same window. Every time I goto the task bar and try switching windows they occupy each other's window. Is there a way to view files side by side?
I am trying to make my textbox where information is entered do a vlookup to a hidden sheet that is named facility and have it fill in other text boxes.
The textbox that will have the information entered is textbox1 and then when the number is entered, it is to do vlookup and fill in textbox2, textbox3, textbox4
Each of the hidden form column headers are MPIN, FacilityName, State and Zip. So if the user says puts in 9873, it will populate in 2, 3, 4 the corresponding data on that sheet. Now, if it does not find an MPIN that is on that hidden sheet, I need it to error, MPIN not found.
Here is the code I have so far:
Private Sub UserForm_Initialize() cmdsave.Enabled = True Combo1.AddItem "Implant Pass-through: Auto Invoice Pricing (AIP)" Combo1.AddItem "Implant Pass-through: PPR Tied to Invoice" Combo1.AddItem "Implant Pass - through: PPR" Combo1.AddItem "No Implant Pass-through: PPR" Combo1.AddItem "No Implant Pass-through: Outlier payment"
I have MS Office 2010 Home Edition. Is there a way to make 2 different Excel docs show up on 2 different monitors at the same time (one on each, of course)? (I have a PC and 2 displays total.)
What i want to be able to do is select an item from combobox (comboCPM) and then be able to check off some or all of the checkboxes then up date that line items record.
Check box value can be a "x" or "true" dont really care.
I have gone though the combox excercise at www.contextures.com, but when I try to use that logic in my spread sheet I get nothing in my drop down... just blank spaces
We use an accounting purchasing program that stores it's data in Access format. I have an Excel sheet that does a query to that data source and returns inventory part numbers, descriptions and pricing.
This file is about 3mb. Using this file as a data source (was trying to make it portable so the sales people can take the data with them) I created a quoting sheet, where they can lookup parts and have all the info pull into the quote so they can give customers a quote with fairly current info. At first I had my search routine copy and paste in links to the info, but that created a problem when the sales person wants to open an old quote to see what they gave someone. So then I had it just paste values, which works fine except when the quote has expired and the sales person wants to keep all the same parts but wants current pricing. I was thinking something like index(match) but VBA code wouldn't let me do that. I was hoping to write code for a button that they can click and it fetches current info.
