Displaying The Row And Column Numbers Within A Range
Feb 9, 2009
Is it possible to display the actual relative row and column number in a cell within a range more efficiently then listed below?
For example: I have a named range "data" D7:L19.
In cell E8 should display R2C2. In cell G17 should display R11C4. etc.......
I am using a method described below where cell E8 will have the formula:
="R"&ROW()-ROW($D$7)+1&"C"&COLUMN()-COLUMN($D$7)+1
The reason i am doing this is to solve a bigger problem creating dynamic column headers from a vertical list (named range). But sometimes the column headers, although being consecutive, may be listed in every other column.
Col 1 Col 2 Col 3 Col 4
Heading1 (nothing) Heading2 (nothing) etc......
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I have a list of client names with their respective numbers on a sheet 1 and I have a list of jumbled client names with the names repeated in the next sheet 2. I would like to retrieve the client number from the data sheet and display the number for that respective client name in the second sheet
Sheet 1:
Client Number Client Name 1 David 2 Tom 3 Suzan 4 Richard
Sheet 2: Client Name Client Number Richard Tom David Suzan Richard Tom David
I want the program to retrieve the client number for the names from sheet 1 and display it accordingly in sheet 2. For eg:- it should retrieve Richard's client number as 4 from sheet 1 and display digit 4 next to richard's name in the client number column. I have attached the sample document.
I want to be able to use column numbers instaed of letters when selecting a range in VBA. My current code is: Range("G12:Z500").Select. The columns, however are reliant upon a variable, therefore I would like to be able to use that variable to change the columns when selecting this range.
Without sorting the original field, I am attempting to compare the values in column 1 and then assign a "place" value in column 2 ( cell) next to each value compared starting with 1 (least value) thru n ....until all values have been compared.
In the attached workbook I'm trying to populate Column E with sequential numbers (as shown) based upon a changing range (defined as a named range called 'range'). Is it possible to write a formula in the cells in Column E that will do this?
How I can show the longest string in a column, I've tried to find a formula that does this but it only shows the number of characters, not the actual string contents.
I have a combobox on a userform that I have set the columncount to 3, so it displays data from columns A, B, and C when the combobox dropdown is used. However, once someone makes a selection from the dropdown, only the item from the first column is displayed in the combobox. Is there a way for me to show the info from all 3 columns once a selection is made?
I am trying to search for a string of numbers (column 2) in an array, and have "YES" be written on the same line in column 3 if the string is found in the names ANYWHERE in column 1. Please see the desired results on the picture in column 3.
I have tried many things, including SEARCH function which can only work with 1 cell not many, COUNTIF and more advanced functions, but I think have not succeeded because of my lack of knowledge in arrays.
I have a column (B) of randomly generated numbers 1-14, and am using this formula range to sort in descending order and return the relevant value from column (c).
=VLOOKUP(LARGE(B3:B20,1),B3:C20,2,) to =VLOOKUP(LARGE(B3:B20,14),B3:C20,2,)
Works great, except when a number is duplicated, (E.G. 14,13,13,12,11,10,10,9,8 etc). It then returns the first value from(C) repeated, and not the value from the second and subsequent duplicated reference numbers.
I'm having to re-learn formula commands in order to continue to use my spreadsheets (I had tried to get the Quattro Pro converter to work in Excel 2003 with no success). Actually, I would have stayed with QP since I find it much more user friendly, but with Excel being the standard spreadsheet that most people use, I figured I better get used to it. Anyway, I'm currently trying to find out how I might get the same text that shows up in varying cells in an otherwise blank column (other cells contain formulas, but no text) to also show up in another fixed cell (which can be where I put this formula).
Is there a formula/function in excel that can take all the cells in a column, lets say Column A, and paste/display it in another file without the spaces between the cells with values and without duplicates?
Worksheet1 Column A
1 Name 2 3 Mike 4 Rob 5 Ryan 6 7 Mindy 8 Paul 9 10 Rob 11 12 Mindy 13 Chris
Worksheet2 Column A
1 Name 2 Mike 3 Rob 4 Ryan 5 Mindy 6 Paul 7 Chris 8 9 10 11 12 13
The basic spreadsheet consists of a list of names down the left hand side with 19 columns across - one for each art activity (I have pasted a copy of it below - but it doesn't paste so good!). Each person has selected their three activities and this has been recorded by placing a 1, 2 or 3 in the relative columns. Each person has been told that they will get a place on two out of three of their chosen activities (in which case we will change one of their choices to a 0).
What I would now like to be able to do is to create a mail merge in Word which looks at each person and then goes along that row to find out which columns have a 1, 2, or 3 in it. The heading for that column would then be used as a merge field so that I end up with a word document which looks something like this:
I have a spreadhseet where columns I and J (range from I6 to J300) serve as input cells, off to the right, 23 columns over in AF and AG respectively I have a hidden array formula (Index, match) calculating values based on input in either column I or J and several factors embedded in reference table in the same sheet. That works fine. I want cells in columns I and J to be interdependent, in other words, input in column I drives calculations in a hidden formula and I want the value of that calculaton to display in column J (in a adjacent cell input in I6 results in display in J6), but if I input value in J then this value will drive calculation in a hidden formula and display in I (let's say I is centimeters and J is inches). I have a code that works (I set it up as a try just for few rows) but only one code section at a time, not together. If I choose column I (#9) to go first in code, values update in J, but not the other way around, if I choose column J (#10) to go first in code, values update in I, but not the other way around. What am I doing wrong, I tried Target.address case, I tried Intersect ... is nothing then etc. They all work one at a time but not together. Here is the code as it stands now
I wanted to count the number of instances that Matt's been late. If there are consecutive timestamps (ex. 600-620, 620-640) that he's been late, I wanted Excel to display 1 and then I'll just sum it up. Or if Excel can do this directly, add all the instances because what I actually need is the total per person.
In this example, I would need a result of 4 instances.
tell if the blank cells will affect the formula or if I still need to do something about them.
I am trying to create a summary Calendar that would display all the names of the people who are off on a given day. I have a grid where I display each day of the month and a person in the group has their own column. If they are out of the office for any reason their name appears in that row. In the big Summary Calendar cell for each day of the month I want to look across all the people columns for that day and then display the names of the people who are not going to be in the office. Can I do this by a formula or will using VBA work best.
Column A & B has a list of Supplier Part numbers and Buyer Part numbers as below.
Supplier P/N Buyer P/N
HGFYE/12 111111
HYEYDH/14 222222
[Code] ..........
Cell D2 is an open cell that any data can be entered into as a search term. What I am trying to do is search for a Supplier P/N that have the characters "H", "G" or "E" in it, so entering "HGE" into cell D2 would display the results into columns F & G as below.
Supplier P/N Buyer P/N
HGFYE/12 111111
HDGTEY/56 333333
I can easily do a formula for 1 character or a string of characters.
To complicate it further, if the search term has in this example has "YFF", I would like the same formula/code to workout that the result in F & G should show this time
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
Say column A has either numbers or text in each cell, I need a macro to only get each number in each cell that is not a duplicate of a number in any previous cell and list each number found down column B.
I have a column of variances, these contain both negative numbers and positive numbers. I want to gather a sum of all the negative numbers and positive numbers separtely. Basically saying all the positive overeages = this amount And all the negative shortages = this amount. you can see the attached sample.
Is it possible to delete a column of numbers then replace those numbers from adjacent columns and the adjacent columns are then filled with the numbers adjacent to them
I'm working on a spreadsheet with about 400 rows and 10 columns. All the numbers in the columns are formatted as text, which doesn't allow me to use AutoSum. I have selected the cells and formatted them as number with no decimals, but AutoSum still doesn't work because the formatting hasn't changed and they're still formatted as text. I know if I double click each cell, the cell changes the format from text to number, but that will take a lot of time to change 400 cells in each of the 10 columns. What can I do to quickly reformat the cells from text to number?
